ALEOS User Guide
Reports
Each report type has its own configuration page. If a report type is not set to be allowed, its configuration page will be hidden. Some reports will be hidden by default.
176
Figure 15-11: ACEmanager: Events Reporting > Configure Reports
4112515
Standard Events Reporting
6 May.13
Figure 15-12: ACEmanager: Events Reporting > Configure Reports > Reports 7, 8, and 9
When you allow an additional report type on the Setup page, the sub-group configuration page will be made available. For example, to allow Report 8 and display its configuration page, on the Setup page you would select Allow this
Report. To conceal the report configuration and not make it available for events, select Remove this Report.
•
Email-1 — The AirLink device will send out an email to a specific destination using the SMTP settings.
The Test Email feature allows you to send an email test message to verify the email report configuration in Events Reporting. You can specify a recipient, a report subject, and a report message. Only one email address may be used as the Report To destination. Send by clicking the Test Email button; all data in the Report Message will be transmitted.
The email client (SMTP) must first be configured in the Services > Email page.
177
ALEOS User Guide
178
•
SMS-2 — An SMS will be sent to a specific cellular destination such as your cell phone.
A new feature, Test SMS, allows you to send an SMS test message to verify the SMS report configuration in Events Reporting. You can specify a phone number and test text (154 characters) to send. Send by clicking the Test SMS button, and all data in the Report Message is transmitted.
•
Events Protocol-6 — The AirLink device will send out a report to the Reports
Server to allow an interface with a wider variety of applications.
•
Report-7, Report-8, Report-9 — An additional destination for Email, SMS, or
Events Protocol.
For the message report types Email, SMS, and Events Protocol, you will need to select which data you would like included in the report.
Email
•
Report To — The email address where the report should be sent.
•
Report Subject — The subject that should be displayed.
•
Report Message — The message you want included with each report.
Note: You cannot send an Email with your AirLink device unless the Email server you have configured allows your AirLink device as a relay host. Talk to your network administrator to ensure you can send email through the email server using your AirLink device.
SMS
•
Report To — The cellular phone number where the report should be sent.
•
Report Message — The message you want included with each report.
Note: You can only send SMS from your AirLink device if your cellular account allows
SMS. You may need to have SMS added to the account. SMS from data accounts is blocked on some cellular networks.
•
1 - Relay 1 — Open
•
2 - Relay 1, Inverted — Closed
•
3 - Relay 2 — Open
•
4 - Relay 2, Inverted — Closed
Events Protocol
The Events Reporting protocol is a collection of messaging formats. The messages are sent to the Reports Server.
The Events Protocol includes four message types.
•
1 - Type, Length, Value — The TLV consists of the MSCI ID as the type, the length of the data, and the actual data.
•
2 - Binary — A binary condensed form of the TLV message will be sent.
4112515
