Services Configuration
Passive FTP
The Passive FTP function may not be required by your FTP server application or by your cellular account.
This function only works with All Hosts Use Private IPs and the first DHCP allocated address from the address pool (such as 192.168.13.100) for both server and client. (if using an ALEOS-connected client). This function will work with
USB/net, but only if there is no Ethernet connection.
Figure 8-15: ACEmanager: Services > Passive FTP
Field
Passive FTP Enable
Passive FTP Port
Description
Enables passive FTP.
•
Enabled (Default)
•
Disabled
Identifies the port number passive FTP will use. Default: 21.
Rev. 6 May.13
113
