Security Configuration
Note: Outbound restrictions do not apply to responses to inbound data requests. To restrict inbound access, you need to set the applicable inbound filter.
Figure 7-6: ACEmanager: Security > Trusted IPs > Outbound
Field
Outbound Firewall
Mode
Trusted IP
Description
Disables or Enables port forwarding rules. Options: OFF (default) or ON.
Each entry can be configured to allow a single IP address, for example 64.100.100.2, or the
IP addresses from a complete subnet, such as 64.100.10.255 allowing all IP addresses from 64.100.10.0 to 64.100.10.255.
MAC Filtering
MAC filtering restricts LAN connection access. You can specifically block or allow a connection from a computer or other device by blocking or allowing the MAC address of its network interface adapter.
Figure 7-7: ACEmanager: Security > MAC Filtering
Rev. 6 May.13
89
ALEOS User Guide
Field
MAC Filtering
MAC Filtering Mode
MAC Address
Description
Enable or disable MAC Filtering. Options: Disabled (default) or Enabled.
Allows or blocks the MAC Addresses listed. Add the MAC addresses by clicking on Add
More. Options: Blocked List (default) or Enabled.
This is the MAC Address of the interface adapter on a computer or other device.
90 4112515
