ALEOS User Guide
Table 15-1: Summary of Events
AVL
GPS Fix
State Change
Vehicle Speed
Heading Change
Engine Hours
Network
RSSI
Network State
Network Service
Threshold Crossing
Threshold Crossing
Threshold Crossing
Threshold Crossing
State Change
State Change
Fix Lost
Fix Obtained
Any Fix Change
Vehicle Speed (KM/h)
Heading Change (degrees)
Engine Hours
Signal Power (-dBm)
When Device is Ready
•
Voice
•
Roaming
•
2G
•
3G
•
EVDO Rev A or HSPA
•
Any Service Change
Other Report Types
Periodic Reports
Power In
Board Temperature
CDMA Radio Module
Threshold Crossing (Time)
Threshold Crossing
Threshold Crossing
Threshold Crossing
Period to compare (seconds)
Power threshold (volts)
Degrees Celsius
Degrees Celsius
Configuring Reports
There are six ways to send a report. The configuration will vary.
•
Email
· Destination email address
· Subject, Message
· Data groups
•
SMS text message
· Destination Phone number
· Message
· Data Groups.
•
SNMP Trap notification
· Destination IP is configured in the SNTP menu.
•
Relay
· Select the relay to link to, and Invert if necessary.
•
RAP message
174 4112515
Standard Events Reporting
· Destination report server and report type is configured in the PinPoint
Menu.
•
Events Protocol message to a server
· Destination report server is configured in the PinPoint Menu
· Report format – TLV, Binary, ASCII, XML. See Events Protocol (appendix
A) for details.
The Reports group allows you to configure whose reports are sent and what date they contain.
The Setup page for Reports configures which types of reports will be available.
6 May.13
175
