DMS Go Operator&#39

Chapter 5. Using Parameter Files

5.2

Saving a New Parameter File (PARAM-SAVE P-SET)

To save the currently loaded parameter file:

1.

In the

MAIN menu, activate the PARAM submenu using the joystick (

).

2.

Use the joystick ( ) to select the function titled

SAVE P-SET, and move it left or right to activate the function.

3.

The Param Set File Name window opens. Move the joystick up or down ( ) to choose the first character in the desired file name.

Press F2 (ENTER) or the center of the joystick ( ) to enter the character. Then, move the joystick left or right ( ) to move the cursor to another character position in the text string. Repeat the process until you have entered the entire file name. Press F4

(CONFIRM) to save the file.

4.

After making your choice, use the joystick ( ) to move to another function, or press HOME to return to the Main Menu.

DMS Go Operator’s Manual 105

Chapter 5. Using Parameter Files

[no content intended for this page - proceed to next page]

106 DMS Go Operator’s Manual