advertisement
Chapter 6. Working with Recorded Data
6.4
Adding a Comment to a Stored Value
Users can add comments to individual values from the prepared File Comment list.
1.
In the Measure mode, with a data file active and the desired data point (which must already contain a thickness measurement) selected, center-press and briefly hold the joystick.The function key window will now change, so that F4 is
NOTE.
2.
Press F4 (
NOTE) The File Comment List window opens on the display screen.
3.
Move the joystick up or down ( ) to choose the file comment. Press F2 (
TAG) to enter the character. Then, move the joystick .
When you have completed adding the comment, press F1 (
EXIT) to confirm the entry.
The DMS Go will return to Measure mode, and the letter associated with the comment will appear in the “Comments” column next to the value column.
DMS Go Operator’s Manual 123
advertisement
Related manuals
advertisement
Table of contents
- 22 1.1 Supplying Power to the Instrument
- 24 1.2 Powering the Instrument ON and OFF
- 24 1.3 Using the Keypad
- 26 1.3.1 Instrument Orientation
- 27 1.3.2 Keypad Components
- 29 1.3.1 Joystick Functions
- 30 1.3.2 Multi-Key Functions
- 32 1.4 Using the Display
- 33 1.4.1 Portrait Mode
- 35 1.5 Display Icons
- 36 1.6 Using the SD Slot, USB Connector & I/O Connector
- 37 1.6.1 Removing the SD Card
- 37 1.6.2 Inserting the SD Card
- 38 1.6.3 Connecting the USB Port
- 39 1.6.4 Connecting the I/O Port
- 40 1.7 Typical DMS Go Operation
- 41 1.8 DMS Go Software Options
- 43 2.1 Display Screen and Keypad Features
- 46 2.2 The Menu System
- 48 2.3 Initial Setup
- 49 2.3.1 Language, Units of Measurement, Date, and Time
- 56 2.3.2 Screen Appearance
- 70 2.3.3 Setting Security Functions
- 78 2.4 Installing a Probe
- 78 2.4.1 Connecting the Probe
- 80 2.4.2 Configuring the Instrument
- 85 2.5 Calibration
- 86 2.5.1 1-Point Calibration (PROBE & CAL - CALIBRATION)
- 90 2.5.2 2-Point Calibration (PROBE & CAL - CALIBRATION)
- 91 2.5.3 Calibrating by Material Velocity (PROBE&CAL - VELOCITY)
- 92 2.5.4 Adjusting Temperature Compensation (PROBE & CAL - TEMP COMP)
- 94 2.6 Using the Calibration Reminder Alarm (PROBE & CAL - CAL REMINDER)
- 96 3.1 Creating a Data File (DR - EXPLORER - NEW)
- 108 3.2 Creating Master Comments for Addition to a File (DR - MASTER CMT)
- 110 3.3 Setting Up the Meter to Overwrite Data (DR-OVERWRITE)
- 111 3.4 Accessing the Data Recorder File
- 111 3.4.1 Selecting a Data File (DR - EXPLORER)
- 112 3.5 Making and Recording Measurements
- 113 4.1 Setting up Data Measurements
- 113 4.1.1 Positioning Gate A and Gate B
- 117 4.1.2 Selecting the Measurement Method (MEASURE - MODE)
- 119 4.1.1 Setting up a Dual Element Transducer (MEASURE - DUAL MULTI)
- 120 4.2 Adjusting the Display
- 120 4.2.1 Setting the Display Range (MEASURE - DISPLAY RANGE)
- 123 4.2.2 Setting the Display Delay (MEASURE-DISPLAY DELAY)
- 124 4.2.3 Setting the Freeze (MEASURE - FREEZE)
- 125 4.2.4 Setting the MAX GAIN MODE (MEASURE - MAX GAIN MODE)
- 127 4.2.5 Setting Gate Alarms
- 130 4.3 Displaying Measured Results (MEASURE- RESULTS)
- 134 5.1 Loading a Stored PARAM File (PARAM-LOAD P-SET)
- 135 5.2 Saving a New Parameter File (PARAM-SAVE P-SET)
- 137 6.1 Selecting a Data File (DR - EXPLORER)
- 140 6.2 Viewing the Data Recorder File in a List or Spread Format (DR - VIEW)
- 142 6.3 Using Existing Data Recorder Files (DR - PROPERTIES)
- 144 6.3.1 Moving to a Specific Data Point (DR-PROPERTIES-RECORD)
- 145 6.3.2 Modifying Data Entry (DR-PROPERTIES-RECORD)
- 147 6.3.3 Viewing File Statistics (DR-PROPERTIES-STATS)
- 149 6.3.4 Editing the File Header (DR-PROPERTIES-HEADER)
- 150 6.3.5 Changing the Size of the Data Recorder File (DR - PROPERTIES - EDIT)
- 152 6.3.6 Adding or Modifying Comments (DR-PROPERTIES-COMMENT)
- 153 6.4 Adding a Comment to a Stored Value
- 154 6.5 Adding a Micro-Grid to a Stored Value
- 154 6.5.1 Creating and Navigating Within a Micro-Grid
- 155 6.6 Exporting the Active File (DR - EXPORT)
- 157 A.1 Display
- 157 A.1.1 Active Area
- 157 A.1.2 Size
- 157 A.1.3 Pixel Resolution
- 158 A.2 Environment
- 158 A.2.1 Languages
- 158 A.2.2 Size
- 158 A.2.3 Weight
- 158 A.2.4 Temperature Shock (Storage)
- 158 A.2.5 Vibration
- 159 A.2.6 Shock
- 159 A.2.7 Loose Cargo (In Shipping Container)
- 159 A.2.8 Transit Drop (Packaged for Shipment)
- 159 A.2.9 Operating Temperature Range
- 159 A.2.10 Storage Temperature Range
- 159 A.2.11 Dust Proof / Water Proof
- 160 A.2.12 Hazardous Atmosphere Operation
- 160 A.3 Compliance
- 160 A.3.1 EMC/EMI
- 160 A.3.2 Ultrasound
- 160 A.4 I/O Connectors
- 161 A.5 Power Supply
- 161 A.5.1 Battery Type
- 161 A.5.2 Operating Time
- 161 A.5.3 Charger
- 161 A.6 Measuring Range
- 162 A.7 Digital Display Resolution
- 162 A.8 Material Velocity Range
- 162 A.9 Units
- 162 A.10Measurement Techniques
- 162 A.10.1 DMS Go TC Only
- 163 A.11Measurement Display Modes
- 163 A.12Calibration
- 163 A.13Update Rate
- 163 A.14Receiver
- 164 A.15Pulser
- 164 A.16Memory
- 164 A.17Data Recorder
- 164 A.18File Formats
- 164 A.19Attachments
- 165 A.20Application Software
- 165 A.20.1 UltraMATE LITE
- 165 A.20.2 UltraMATE
- 165 A.20.3 Software Development Kit
- 168 B.1 Linear File
- 169 B.2 Custom Linear
- 170 B.2.1 Custom Linear File Example
- 171 B.3 Grid File
- 172 B.4 Custom Grid File
- 173 B.4.1 Grid File Flexibility
- 174 B.5 Boiler File
- 176 B.5.1 Boiler File Flexibility
- 177 B.5.2 Example of Boiler File
- 178 B.6 Custom Point File
- 180 B.6.1 Example of Custom Point File