DMS Go Operator&#39

A.11 Measurement Display Modes

Temperature corrected thickness

Thickness and large A-Scan

B-Scan

MIN / MAX capture

Differential

Data Recorder

A.12 Calibration

One-point, two-point / Auto or manual on-block and off-block zero /Automatic V-path correction

A.13 Update Rate

32 Hz in MIN/MAX-capture mode and B-scan display mode /4 Hz or 8 Hz or 16 Hz (selectable) in standard mode

A.14 Receiver

110 dB dynamic range, automatic gain control with manual (set by user), High, low and Auto Gain limit

Appendix A. Specifications

DMS Go Operator’s Manual 133