advertisement
Appendix B. DR File Type Explanations
B.6.1 Example of Custom Point File
File Name
Location:
Point
H2SO4 PIPE 15
SECTION 2
P1 - 0º
P1 - 90º
P1 - 180º
P1 - 270º
P2 - 0º
P2 - 90º
P2 - 180º
P2 - 270º
SECTION 3
P1 - 0
P1 - 90º
P1 - 180º
P1 - 270º
P2 - 0º
P2 - 90º
P2 - 180º
P2 - 270º
150 DMS Go Operator’s Manual
Appendix C. Environmental Compliance
This appendix contains information on the following topics:
•
WEEE Directive (see Section C.1 on page 152)
•
Battery disposal (see Section C.2 on page 153)
Appendix C. Environmental Compliance
DMS Go Operator’s Manual 151
Appendix C. Environmental Compliance
C.1 Waste Electrical and Electronic Equipment (WEEE) Directive
GE Sensing & Inspection Technologies is an active participant in Europe’s Waste Electrical and Electronic Equipment (WEEE) take-back initiative, directive 2002/96/EC.
The equipment that you bought has required the extraction and use of natural resources for its production. It may contain hazardous substances that could impact health and the environment.
In order to avoid the dissemination of those substances in our environment and to diminish the pressure on the natural resources, we encourage you to use the appropriate take-back systems. Those systems will reuse or recycle most of the materials of your end life equipment in a sound way.
The crossed-out wheeled bin symbol invites you to use those systems.
If you need more information on the collection, reuse and recycling systems, please contact your local or regional waste administration.
Visit
www.ge.com/inspectiontechnologies for take-back instructions and more information about this initiative.
152 DMS Go Operator’s Manual
Appendix C. Environmental Compliance
C.2 Battery Disposal
This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling return the battery to your supplier or to a designated collection point.
C.2.1 What do the Markings Mean?
Batteries and accumulators must be marked (either on the battery or accumulator or on its packaging, depending on size) with the separate collection symbol . In addition, the marking must include the chemical symbols of specific levels of toxic metals as follows:
•
Cadmium (Cd) over 0.002%
•
Lead (Pb) over 0.004%
•
Mercury (Hg) over 0.0005%
DMS Go Operator’s Manual 153
Appendix C. Environmental Compliance
C.2.2 The Risks and Your Role in Reducing Them
Your participation is an important part of the effort to minimize the impact of batteries and accumulators on the environment and on human health. For proper recycling you can return this product or the batteries or accumulators it contains to your supplier or to a designated collection point.
Some batteries or accumulators contain toxic metals that pose serious risks to human health and to the environment. When required, the product marking includes chemical symbols that indicate the presence toxic metals: Pb for lead, Hg for mercury, and Cd for cadmium.
•
Cadmium poisoning can result in cancer of the lungs and prostate gland. Chronic effects include kidney damage, pulmonary emphysema, and bone diseases such as osteomalcia and osteoporosis. Cadmium may also cause anemia, discoloration of the teeth, and loss of smell (anosmia).
•
Lead is poisonous in all forms. It accumulates in the body, so each exposure is significant. Ingestion and inhalation of lead can cause severe damage to human health. Risks include brain damage, convulsions, malnutrition, and sterility.
•
Mercury creates hazardous vapors at room temperature. Exposure to high concentrations of mercury vapor can cause a variety of severe symptoms. Risks include chronic inflammation of mouth and gums, personality change, nervousness, fever, and rashes.
154 DMS Go Operator’s Manual
Appendix D. Probes
Appendix D. Probes
Probe
DA301
DA303
DA312
DA501
DA503
DA507
Application
General use
High penetration
Thin materials -Fingertip
General use - high sensitivity
High penetration - high sensitivity
General use - optimized for through coating measurement
Part
Number
Table 10: Probes for DMS Go
Cable
Range mm
(steel)
Range inch
(steel)
Min Max Min Max
151822 KBA533 or
DA231
1.25 200.00
0.050
Temp Range
8.000 -20 to +60°C
0 to 140°F
Freq
5 MHz
Contact
Diameter
12.1 mm
0.475"
151823 KBA533 or
DA231
151824 KBA533 or
DA231
5.00 300.00
0.60
50.00
0.200 12.000 -20 to +60°C
0.025
0 to 140°F
2.000 -20 to +60°C
0 to 140°F
2 MHz 16.1 mm
0.635"
10 MHz 7.6 mm
0.3"
1258820 KBA533 or
DA231
1258827 KBA533 or
DA231
1347128 potted
1.00 200.00
5.00 300.00
2.50 300.00
0.040
8.000 -10 to 70°C
14 to 160°F
0.200 12.000 -10 to 70°C
14 to 160°F
0.100 12.000 -20 to +60°C
0 to 140°F
5 MHz
2 MHz
5 MHz
12.1 mm
0.475"
16.1 mm
0.635"
18 mm
0.685"
DMS Go Operator’s Manual 155
Appendix D. Probes
Probe Application
DA512EN Thin materials - high sensitivity - Fingertip
DA590EN High temp - continuous measurement
DA590EN High temp - intermittent measurement
FH2E High sensitivity fingertip
Table 10: Probes for DMS Go (cont.)
Part
Number Cable
Range mm
(steel)
Min Max
Range inch
Min
(steel)
Max
1025336 potted 0.80
60.00
0.030
Temp Range
2.500 -10 to 70°C
14 to 160°F
Freq
Contact
Diameter
7.5 MHz 7.5 mm
0.296"
162536 C120 or
C123
162536 C120 or
C123
162571 potted
162573 potted
2.50 125.00
0.100 12.000 0 to +200°C
32 to 400°F
2.50 125.00
0.100 12.000 200 to 540°C
400 to 1000°F
0.75
50.00
0.030
2.000 -20 to +60°C
0 to 140°F
0.75
50.00
0.030
2.000 -20 to +60°C
0 to 140°F
5 MHz 12.1 mm
0.475"
5 MHz 12.1 mm
0.475"
7.5 MHz 9.6 mm
0.38"
7.5 MHz 9. 6 mm
0.38"
FH2E-D High sensitivity fingertip -
Dialog
Notes:
•
DA590 actual temperature range depends upon surface condition, and couplant.
•
DA590 temperature cycling required with surface temperatures above 200°C (400°F) per GE Inspection Technologies instruction card.
156 DMS Go Operator’s Manual
Appendix D. Probes
Probe
TC560
Application
TopCOAT / Auto-V - coating range
Table 10: Probes for DMS Go (cont.)
Part
Number Cable
Range mm
(steel)
Min Max
Range inch
Min
(steel)
Max
162550 KBA532 or
KBA531TC
Temp Range Freq
0.00
2.00
0.000
0.080 -20 to +60°C
0 to 140°F
5 MHz
Contact
Diameter
15.9 mm
0.675"
TC560
A2DFR
CA211A
TopCOAT / Auto-V - material range
162550 KBA532 or
KBA531TC
High Resolution Delay Line
Standard contact
162530 C-022 or
CL331
162541 C-022 or
CL331
OSS-10 Oxide Scale - range is application dependent
169618 C-022 or
CL331
Notes:
1.50 200.00
0.060
8.000 -20 to +60°C
0 to 140°F
0.25
10.00
0.010
0.400 -10 to +50°C
14 to 120°F
2.00 400.00
0.080 16.000 -10 to +50°C
14 to 120°F
-10 to +50°C
14 to 120°F
5 MHz 15.9 mm
0.675"
15 MHz 7.6 mm
0.3"
5 MHz 19.1 mm.75”
10 MHz 7.6 mm
0.3"
•
Most Dialog probes are also supported. Consult probe documentation for application specifications.
•
Probe specifications are subject to change without notice.
DMS Go Operator’s Manual 157
Appendix D. Probes
Probe
DP104
Application
High penetration side mount connector
Table 10: Probes for DMS Go (cont.)
Part
Number Cable
162588 KBA-532 5
152161 Potted
Range mm
(steel)
Min
0.7
—
12
Max
Range inch
Min
0.200
(steel)
—
Max Temp Range Freq
-10 to +55°C
14 to 130°F
1 MHz
Contact
Diameter
31.8 mm
1.25"
0.030
0.500
-20 to +60°C
0 to 140°F
10 MHz 3 mm
0.120"
DA312B16 Thin wall external pitting access/small diameter fingertip
HT400A High temp/for use with DMS family of instruments
162006 KBA-535/5
36
1.0
254
162515 Potted 0.6
25 KBA525 Thin wall external pitting access/small diameter fingertip
KBA560 General Purpose / High Temp 162546 KBA531 1.5
200
0.40
10.0
10 to 530°C
0.025
0.060
1.0
8.0
50 to 1000°F
-10 to +55°C
14 to 130°F
0 to +230°C
32 to 450°F
5 MHz 12.7 mm
10 MHz 5 mm
0.200"
17.8 mm
0.700"
158 DMS Go Operator’s Manual
Name
KBA533
DA231
KBA531TC
KBA532
C-120
C-123
CBL-604
CL331
Table 11: DMS Go Cables
Description
Probe cable, dual-Lemo00 to dual-Lemo00, 1.2m (4')
Probe cable, dual-Lemo00 to dual-Lemo00, 1.5m (5')
Probe cable Dual Lemo00 to Microdot 10/32 & 12/32, 1.2m (4'), with boot
Probe cable Dual Lemo00 to Microdot 10/32 & 12/32, 1.8m (6'), no boot
DA590 Probe cable, without armor jacket, 1.2m (4')
DA590 Armor jacket probe cable, 1.2m (4')
Probe cable right angle Lemo00 to Microdot 1.8m (6')
Probe cable Straight Lemo00 to Microdot
Appendix D. Probes
Part Number
163587
151693
163618
163620
1260306
163647
136374
311786
DMS Go Operator’s Manual 159
Appendix D. Probes
Table 12: DMS Go Accessories
Description
Ergonomic Kit (chest harness, wrist strap, belt holster)
Chest Harness
Belt Attachment
Wrist Strap
Lithium Ion Battery
Lithium Ion battery charger /AC power supply
External Battery Charger Adapter for Li-lon Battery
USB Cable
SD Memory Card (2 GB)
SD Card Reader to USB
Transport Case
Heavy Duty, Lockable, Transport Carry Case
Protective Screen Overlays, clear
160
1312444
Part Number
1254633
1254634
1312406
1255323
1255477
1255324
1260193
1255478
1002866
1256799
115737
1305847
DMS Go Operator’s Manual
Index
A
Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Alarm Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Alarms
Calibration Reminder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Defining Logic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98, 99
Alarms, Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Append . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
A-Scan
Selecting a Rectification Mode. . . . . . . . . . . . . . . . . . . . . . . 41
Setting the Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
B
Batteries
Disposal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Level Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Boiler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68, 70, 144
Brightness, Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 44
C
Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
Calibration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Reminder Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Zeroing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 66
Calibration Reminder Alarm, Setting . . . . . . . . . . . . . . . . . . . . . . 70
Case, Rear and Side Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Code, Upgrading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Color
Setting for Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Comment
File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Master . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Config Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Connectors
I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Custom Grid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68, 72, 142
Custom Linear. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, 73, 139
Custom Point. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68, 74, 148
DMS Go Operator’s Manual 161
Index
Customer Support Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
D
Data File, Creating a . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Data File, Selecting a . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Data Point, Moving to a . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Data Recorder Files
Naming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Viewing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Data Set Files
Working With . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Data, Overwriting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Date Format, Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Date of Publication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
Date, Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Decimal Point Style, Selecting. . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Detection Mode, Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Display
Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32, 46
Measured Results Configuration . . . . . . . . . . . . . . . . . . . . . 101
Measured Results Parameters . . . . . . . . . . . . . . . . . . . . . . . 100
Screen Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Setting the Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 44
Setting the Color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Setting the Last Reading . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Setting the Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Setting the Update Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Display Delay, Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Display Range, Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Disposal
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Electronic Waste . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
DR File Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
DR File, Creatiing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
DR Files, Selecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
DR Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Dual Element Transducer, Setting Up . . . . . . . . . . . . . . . . . . . . . 89
162 DMS Go Operator’s Manual
Index
E
Evaluation Mode
Options Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
EXPLORER Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Exporting a File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Extended readings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
F
Features, Display Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
File Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
G
Gain
User-Defined Step Value . . . . . . . . . . . . . . . . . . . . . . . . 95, 96
Gain Toggle
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Gate A
Gate Alarms
Gate Alarms, Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Gate B
Gate Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Gate Starting Point, Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Gate Threshold, Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Gate Width, Adjusting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Gates
Adjusting the Width. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Configuring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Setting the Starting Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Setting the Threshold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Grid File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
I
I/O Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Icons
Battery Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Initial Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
DMS Go Operator’s Manual 163
Index
J
Joystick
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
K
Keypad
Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 7
Using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
L
Language, Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Last Reading, Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Linear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67, 69, 138
M
Master Comment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Measure Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Measured Results
Available Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Configuration of Display . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Measurement Method, Selecting . . . . . . . . . . . . . . . . . . . . . . 87, 88
Measurements, Making . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Menu System
Evaluation Mode Options . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Micro-Grid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Multi-Key Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
N
Naming Data Recorder Files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
O
Operator Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv
Orientation
Instrument Photos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30, 31
Overwriting Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
P
PARAM File, Loading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
PARAM File, Saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Param Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Parameter Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Part Number, Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
Positioning the Gates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
164 DMS Go Operator’s Manual
Index
Power
Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
External Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Powering ON and OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Probe
Configuring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Selecting the Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56, 57
Probe & Cal Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Probe Delay, Viewing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Probe Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Probe Zero, Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64
Probes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Program Version, Reviewing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Properties Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
R
RADIX Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Range, Setting for A-Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113, 115
Rectification Mode, Selecting . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Reminder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Resolution, Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
S
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Setting TG Detection Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Setting the Display Delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Setting the Display Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Setting the Probe Zero . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63, 64
Setup, Initial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Software Upgrades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Specifications
DMS Go. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Starting Point, Setting for Gates . . . . . . . . . . . . . . . . . . . . . . . . . . 84
T
Tag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118, 123
Test Object
Material Effects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi
Temperature Effects. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi
DMS Go Operator’s Manual 165
Index
TG Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Threshold, Setting for Gates . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Time Format, Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Time, Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
U
Ultrasonic Testing Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv
Units of Measure, Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Update Rate, Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Upgrades, Instrument Software . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Upgrading Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
USB Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Using DR Files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
V
Velocity, Viewing and Adjusting. . . . . . . . . . . . . . . . . . . . . . . . . 67
Viewing
Data Recorder Files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
W
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii
Waste Disposal
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Electronic Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
WEEE Directive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Width, Adjusting for Gates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Z
Zeroing Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Zeroing Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 66
166 DMS Go Operator’s Manual
Customer Support Centers
North & South America
50 Industrial Park Road
Lewistown, PA 17044
U.S.A.
Tel: 866 243 2638 (toll-free)
717 242 0327
United Kingdom/Ireland
892 Charter Avenue Canley
Coventry CV4 8AF
England
Tel: +44 845 130 3925
E-mail: [email protected]
P/N 1347494 Rev 3
France
68, Chemin des Ormeaux
Limonest 69760
France
Tel: +33 47 217 9216
Germany
Robert Bosch Str. 3
50354 Hürth
Germany
Tel: +49 2233 601 0
Spain
San Maximo,31, Planta 4A, Nave 6
Madrid 28041
Spain
Tel: +34 195 005 990
www.ge-mcs.com
China
5F, Building 1, No. 1 Huatuo Road,
Zhangjiang High-Tech Park,
Shanghai 201203
China
Tel: +86 800 915 9966 (toll-free)
+86 (0)21 3877 7888
Japan
7F Medie Corp Bldg. 8
2-4-14-Kichijoji Honcho,
Musashino-shi
Tokyo 180-0004
Japan
Tel: +81 442 67 7067
©2011 General Electric Company. All rights reserved.
Technical content subject to change without notice.
advertisement
Related manuals
advertisement