11.3 Means of Test. LG KG291, KG290

11.3 Means of Test a. Select a COM port b. Set the values in Tx or Rx c. Select band and channel d. After setting them all above, press connect button.

e. Press the start button

11. STAND ALONE TEST

Figure 11-1. HW test program

Copyright © 2007 LG Electronics. Inc. All right reserved.

Only for training and service purposes

- 123 LGE Internal Use Only

11. STAND ALONE TEST

Figure 11-2. HW test setting

LGE Internal Use Only

Figure 11-3. Ramping profile

- 124 Copyright © 2007 LG Electronics. Inc. All right reserved.

Only for training and service purposes