Nokia 3200 User Guide

3200.ENv1_9310067.book Page 1 Thursday, September 18, 2003 8:42 AM

Nokia 3200 User Guide

What information is needed?

My number

Voice mail number

Wireless provider’s number

Provider’s customer care

Model number

Numbers

3200

Phone type

International mobile equipment identity (IMEI)

Where is the number?

Wireless service provider




Label on back of phone

(under battery)


(under battery)


(under battery). See “Find information about your phone” on page 8.


LEGAL INFORMATION

Part No.

9310067, Issue No. 1

Copyright © 2003 Nokia. All rights reserved.

Nokia, Nokia Connecting People, Nokia 3200, Pop-Port, and the Nokia Original

Enhancements logos are trademarks or registered trademarks of Nokia Corporation.

Other company and product names mentioned herein may be trademarks or trade names of their respective owners.

Printed in Canada 09/2003

T9 text input software Copyright © 1999-2003. Tegic Communications, Inc. All rights reserved.

Includes RSA BSAFE cryptographic or security protocol software from

RSA Security.

Java is a trademark of Sun Microsystems, Inc.

The information contained in this user guide was written for the Nokia 3200 product.

Nokia operates a policy of ongoing development. Nokia reserves the right to make changes to any of the products described in this document without prior notice.

UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA

OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT

DAMAGES HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED

"AS IS." EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND,

EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,

ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF

THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR

WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.

EXPORT CONTROLS

This device contains commodities, technology, or software exported from the

United States in accordance with the Export Administration regulations. Diversion contrary to U.S. or Canadian law is prohibited.


FCC/INDUSTRY CANADA NOTICE

Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part

15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.


6112099

6140966

6163609

6259312

6311054

6370362

6453179

4969192

5664053

5835889

5946651

6031827

6178535

6356759

4558302

5151946

5317283

5384782

5479476

5581244

5760568

5839101

5907823

5953541

5987137

6014573

6049796

6081732

Manufactured or sold under one or more following US Patents.

Asterisk (*) indicates design patents pending.

6105784

6138091

6151507

6249584

6295286

6363259

6400958

6198928

5640395

5805301

5930233

6011971

6170073

6285888

RE 32,580

5101175

5311151

5378935

5446364

5570369

5729541

5827082

5889770

5920826

5977887

6014551

6047196

6072787

6115617

6144243

6164547

6266330

6314166

6370389

6463278

5266782

5699482

5857151

5960354

6118775

6195338

6377803

4868846

5173927

5331638

5396657

5526366

5600708

5794142

5844884

5912570

5956332

5991857

6026161

6050415

6084920

6119180

6144676

6167248

6272361

6324389

6377820

6470470

5390223

5701392

5859843

5960389

6128322

6199035

6430163

4945633

5212834

5335362

5400949

5553125

5625274

5802465

5845219

5914690

5956625

6006114

6035189

6055439

6084962

6121846

6148209

6185295

6282436

6324412

6381468

6487397

5444816

5722074

5862178

5963901

6137789

6240076

6438370

4969192

5230091

5353328

5416435

5557639

5677620

5809413

5870683

5914796

5956633

6011554

6038238

6060193

6094587

6128509

6151485

6188909

6292668

6347218

6392660

6522670

5487084

5754976

5898925

6005857

6167248

6266321

6456237

5001372

5241583

5371481

5442521

5565821

5692032

5818437

5884103

5917868

5966378

6011853

6043760

6069923

6097964


Nokia 3200 phone at a glance

Power key

Earpiece

Display screen

Left selection key

Talk key

Keypad

Right selection key

End key

Four-way scroll key

Charger port

Nokia 3200 User Guide

Microphone

Pop-port™ connector

Copyright © Nokia 2003


• QUICK GUIDE

Action

Make a call

Answer a call

Answer call during call

End a call

Decline a call

Mute a call

Redial

Adjust call volume

Use in-call menu

Save name and number

Use 1-touch dialing

Look up a name

Check voice mail

Write text messages

Send text messages

Read new message

Reply to a message

Press

Press and hold

Description

Enter a phone number, and press the Talk key.

Press the Talk key, or select Answer.

Press the Talk key.

Press the End key.

Press the End key to send the call to voice mail.

Select Mute during a call.

Press the Talk key twice.

Press the Left and Right scroll keys during a call.

Select Options during a call.

Enter a number, select Options > Save , enter a name, and select OK.

Press and hold a key (2–8). You must assign a key to a number in the phone book.

Select Contacts > Find.

Press and hold the 1 key (contact your service provider for details).

Select Menu > Messages > Text Messages > Create message.

Write the message.

In the message entry screen, select Options > Send. Enter the recipient’s phone number or search for it in contacts, and select OK.

Note: Message service is dependent on the service provider.

If n message(s) received appears on the display, select Show; then select the message you want to read.

Select Options > Reply. Write a reply, and select Options > Send.

Press a key briefly and release it.

Press a key, hold it for two to three seconds, and release it.


3200.ENv1_9310067.book Page vii Thursday, September 18, 2003 8:42 AM

Contents

1 For your safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

About your device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Network services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Shared memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

2 Overview of functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

FM radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Flashlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Multimedia messaging service (MMS) . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Speakerphone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

GPRS and EDGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

MIDP Java™ applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Polyphonic sound (MIDI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Advanced multimedia player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Browser. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Special user interface features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

3 About your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Register your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Find information about your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Get help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Start screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Copyright protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Accessibility solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Nokia PC Suite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Phone menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

4 Basic operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Install the SIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Switch the phone on or off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Set the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Nokia 3200 User Guide

vii


3200.ENv1_9310067.book Page viii Thursday, September 18, 2003 8:42 AM

Make and answer calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Earpiece volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Loudspeaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Options during a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

5 Text entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Standard mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Predictive text input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Punctuation and special characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

6 Phone security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Keyguard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

PIN code request . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Call restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Fixed dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Closed user groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Security levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Access codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

7 Messages (Menu 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Linked messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Before you can send and receive messages . . . . . . . . . . . . . . . . . . . . . . 29

Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Default message type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Font size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Save your message center number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Organize messages with folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Delete messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Message settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Write and send a text message. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Read messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Reply to a message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Forward a message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Picture messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

E-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 viii Copyright © Nokia 2002

3200.ENv1_9310067.book Page ix Thursday, September 18, 2003 8:42 AM

Multimedia messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Voice messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Info message service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Service commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

8 Call log (Menu 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

View calls options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Missed calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Received calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Dialed numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Call times . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Delete call lists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Call duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

9 Contacts (Menu 3). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Types of information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Save information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Change the default (primary) number . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Search for an entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Make a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Add an image to a name or number . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Edit an entry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Delete names and numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Copy entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Business cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

1-touch dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Info, service, and own numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Caller groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Select contacts view and memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

10 Settings (Menu 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Over the Air (OTA) settings service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Tone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58


ix


3200.ENv1_9310067.book Page x Thursday, September 18, 2003 8:42 AM

Display settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Time and date settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Personal shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Call settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Phone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Enhancement settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Security settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Restore factory settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

11 Gallery (Menu 5). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Folders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Folder items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Edit an image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

12 Media (Menu 6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Voice recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

13 Organizer (Menu 7). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Alarm clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

14 Applications (Menu 8) . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Collection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

15 Services (Menu 9) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Set up for browsing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Sign on to the mobile Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Navigate the mobile Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Examples of mobile Internet sites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Bookmarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Service inbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

File upload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 x Copyright © Nokia 2002

3200.ENv1_9310067.book Page xi Thursday, September 18, 2003 8:42 AM

Disconnect from the mobile Internet. . . . . . . . . . . . . . . . . . . . . . . . . . . .96

Set up an automatic connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96

Receive a call while online . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96

Make a call while online . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96

Make an emergency call while online . . . . . . . . . . . . . . . . . . . . . . . . . . .97

Options while online . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97

Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98

Allow or reject cookies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98

Create a digital signature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

Appearance settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99

16 Go to (Menu 10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

17 SIM services (Menu 11) . . . . . . . . . . . . . . . . . . . . . . . . . . 101

18 Instant messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Network selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102

Obtain user name and password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103

Log into service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103

Set your availability. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104

Instant messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104

Chat Sessions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104

Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

Private groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

Instant messaging settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

Log off service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

19 Hardware and enhancements . . . . . . . . . . . . . . . . . . . . . . 112

Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112

Enhancements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

20 Reference information . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

Battery information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115

Enhancements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115

Enhancements, Batteries, and Chargers . . . . . . . . . . . . . . . . . . . . . . . .116

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116

Additional safety information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117


xi


3200.ENv1_9310067.book Page xii Thursday, September 18, 2003 8:42 AM

21 Technical information . . . . . . . . . . . . . . . . . . . . . . . . . . . 122

22 Nokia one-year limited warranty . . . . . . . . . . . . . . . . . . . 123

Appendix A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

Appendix B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137

xii Copyright © Nokia 2002


For your safety

1 For your safety

Read these simple guidelines. Not following them may be dangerous or illegal.

Read the complete user guide for further information.

SWITCH ON SAFELY

Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.

INTERFERENCE

All wireless phones may be susceptible to interference, which could affect performance.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELING

Don't use the phone at a refueling point. Don't use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Don't use the phone where blasting is in progress.

USE SENSIBLY

Use only in the normal position as explained in the product documentation.

Don't touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.


1



ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect incompatible products.

ENHANCEMENTS

Use only approved enhancements. Do not connect incompatible products.

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

BACK-UP COPIES

Remember to make back-up copies or keep a written record of all important information stored in your phone.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press End as many times as needed to clear the display and return to the main screen. Enter the emergency number, then press Send. Give your location. Do not end the call until given permission to do so.

• ABOUT YOUR DEVICE

The wireless device described in this guide is approved for use on the GSM 850,

900, 1800, and 1900 networks. Contact your service provider for more information about networks.

When using the features in this device, obey all laws and respect privacy and legitimate rights of others.

Warning: To use any features in this device, other than the alarm clock, the phone must be switched on. Do not switch the device on when wireless phone use may cause interference or danger.

2 Copyright © Nokia 2003


For your safety

• NETWORK SERVICES

To use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function.

These Network Services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize

Network Services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use Network Services. For instance, some networks may not support all language-dependent characters and services.

Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Contact your service provider for more information.

• SHARED MEMORY

The following features in this device may share memory: contacts list, text and multimedia messages, images and ringing tones in the gallery, voice recorder, calendar notes, and Java™ games and applications. Use of one or more of these features may reduce the memory available for the remaining features sharing memory. For example, saving many images may use all of the available memory.

Your phone may display a message that the memory is full when you try to use a shared memory feature. In this case, delete some of the information or entries stored in the shared memory features before continuing. Some of the features may have a certain amount of memory specially allotted to them in addition to the amount of memory shared with other features.


3



2 Overview of functions

• CAMERA

Your phone has a built-in camera. You can use the full-color screen as a camera viewfinder and the self-timer for a 10-second delay. After you have taken a picture, you can attach it to a multimedia message and send it with MMS, save it as wallpaper in the standby mode, use it as a thumbnail picture in contacts, save it in a compatible PC using Nokia PC Suite software, and upload it to a web address with the content image uploader. When you attach a picture to an entry in your list of contacts, the picture is displayed when your contact calls you.

See “Camera” on page 76 for more information.

• FM RADIO

Your phone has an FM radio that also functions as a clock radio alarm. You can listen to the radio through a headset or the handsfree speaker (with the headset attached).

See “Radio” on page 78 for more information.

• FLASHLIGHT

Your phone has a built-in flashlight that you can activate when the phone is in the standby mode or when there is a call in progress. To activate the flashlight:

Press and hold the Scroll up key. The light stays on until you release the Scroll up key.

OR

Press the Scroll up key twice in quick succession. The light stays on until you press the Scroll up key again.

You can also use the flashlight to alert you to an incoming call. See “Customize a profile” on page 57 for more information.

• MULTIMEDIA MESSAGING SERVICE (MMS)

Your phone is able to send and receive multimedia messages made up of text and pictures and to receive messages containing text, a picture, and sound such as polyphonic ringing tones. You can save pictures and ringing tones to personalize your phone. In addition, you can easily send text messages and multimedia messages to multiple recipients.

See “Multimedia messages” on page 40 and “Options” on page 30 for more information.



Overview of functions

• SPEAKERPHONE

You can use your phone as a speakerphone.

See “Loudspeaker” on page 18 for more information.

• GPRS AND EDGE

General packet radio service (GPRS) technology allows mobile phones to send and receive data over a mobile network. Applications such as browsers, MMS, text messaging, and Java use GPRS. Your phone supports up to three simultaneous

GPRS connections.

For more information, see “GPRS, EDGE, CSD” on page 64.

Also, consult the PC Suite 5.7 User Guide and PC Connectivity Guide. The guide,

Nokia PC Suite, and all related software can be downloaded from the U.S. Mobile

Phone products section of www.nokia.com.

• MIDP JAVA™ APPLICATIONS

Your phone supports Java 2 Micro Edition, J2ME

TM

, and includes some Java applications and games that have been specially designed for mobile phones.

You may be able to download new applications and games to your phone from a PC with Java installer software or from some mobile Internet services.

See “Applications (Menu 8)” on page 88 for more information.

• POLYPHONIC SOUND (MIDI)

Polyphonic sounds can be used in ringing tones, gaming sounds, and message alert tones. They consist of several sound components played at the same time, like an actual melody through a speaker. Your phone has sound components from over 40 instruments that can be used for polyphonic sounds and the phone can play four instruments simultaneously. The phone supports scalable polyphonic MIDI

(SP-MIDI) format.

You can receive polyphonic ringing tones using a multimedia service (see “Read and reply” on page 42) or download them using the gallery menu [see “Gallery (Menu 5)” on page 73].

• ADVANCED MULTIMEDIA PLAYER

The built-in multimedia player allows you to view images and play audio and image animations. The multimedia player is activated by other features, such as the Gallery, when there are multimedia files to be displayed.

See “Gallery (Menu 5)” on page 73 for more information.


5



• BROWSER

The built-in browser can interpret both WAP-based and XHTML-based content.

See “Services (Menu 9)” on page 92 for more information.

• SPECIAL USER INTERFACE FEATURES

You can choose from two types of menu interface: List and Grid.

See “Select menu view” on page 60 for more information.

In the List interface, full color images introduce every menu. Use the Scroll up and Scroll down keys to navigate through the menus.

In the Grid interface, multiple menu icons appear on a single display. Use all four scroll keys to navigate through the icons.

With the Go to menu feature, you can create a convenient shortcut menu available through the Right selection key that lists the functions that you use most often. For more information about the Go to menu, see “Personal shortcuts” on page 61.

Quick keys from the start screen take you instantly to functions accessed frequently. See “Quick keys” on page 10 for more information.



About your phone

3 About your phone

Congratulations on your purchase of the Nokia 3200 mobile phone. Your phone provides many functions which are practical for daily use, such as a camera, radio, alarm clock, calculator, calendar, and more. Your phone can also connect to a PC, laptop, or other device using the data cable or built-in IR port. To personalize your phone, you can set your favorite ringing tones, program a Go to Menu, and create custom cut-out covers. For more information on connectivity, refer to the PC Suite 5.7

User Guide and PC Connectivity Guide. The guide, Nokia PC Suite, and all related software can be downloaded from the U.S. Mobile Phone products section of

www.nokia.com.

• REGISTER YOUR PHONE

Be sure to register your phone at www.warranty.nokiausa.com or call

1-888-NOKIA-2U (1-888-665-4228) so that we can serve you better if you need to call a customer center or to have your phone repaired.

• TERMS

This guide uses certain terms for the parts of the phone and the steps that you are asked to perform.

• Highlighted options on the screen are enclosed within a dark bar. The selection keys are used to act on the highlighted option.

• Scroll keys are used to move up and down in the menus. With some features, such as the calendar monthly view, text messages, and special characters, you can move the screen cursor left and right as well as up and down. For example, if instructed to scroll to another contacts entry, this means press the Scroll up key or the Scroll down key. In some submenus, not all options are visible at once, and you may need to scroll up or down to view the full range of options.

• Select means to press the Left selection key or the Right selection key. To select an option, press the selection key below the menu item on the phone screen. In the illustration, press the Left selection key to select Inbox, or press the Right selection key to go back to the previous menu. Some functions require you to go through several submenus. For example, if this guide says Select

Settings > Tone settings > Ringing tone you would scroll to the Settings menu and press the Left selection key, then scroll to the Tone settings option and press the Left selection key, then scroll to the Ringing tone option and press the Left selection key.


7



• FIND INFORMATION

ABOUT YOUR PHONE

The label on the back of your phone, underneath the battery, contains the following information:

• Model number

• Phone type and FCC ID

• International mobile equipment identity (IMEI)

Information label

• GET HELP

If you need help, Nokia Customer Care is available for assistance. We recommend that you write down the following information and have it available if you call.

• The IMEI printed on the back of the phone, beneath the battery

• Your zip code

Contact Nokia

Please have your phone or enhancement with you when contacting either of the numbers below.

Nokia Customer Care Center, USA

Nokia Inc.

7725 Woodland Center Boulevard

Suite 150

Tampa, Florida 33614

Tel: 1-888-NOKIA-2U

(1-888-665-4228)

Fax: 1-813-249-9619

TTY: 1-800-24-NOKIA

(1-800-246-6542)

(for TTY/TDD users only)

Customer Care, Canada

Nokia Products Ltd.

601 Westney Road South

Ajax, Ontario L1S 4N7

Tel: 1-888-22-NOKIA

(1-888-226-6542)

Fax: 1-905-427-1070



About your phone

Contact your service provider

To use the network services available in your phone, you will need to sign up with a service provider. In many cases, the service provider will make available descriptions of their services and instructions for using features such as:

• Voice mail and voice privacy

• Call waiting, call forwarding, and caller ID

• Messaging

• News and information services

• Selected Internet services

Service providers may differ in their support of features. Before you sign up, make sure that your service provider supports the features that you want to use.

Guide updates

From time to time, Nokia updates this guide to reflect changes. The latest version may be available at www.nokia.com/us.

Online tutorials

An interactive tutorial for this product may be available at the web site

www.nokiahowto.com.

In-phone help

Many features have brief descriptions (help text) which can be viewed on the display.

To view these descriptions, scroll to a feature and wait for about 15 seconds. Select

More to view all of the description (if necessary), or select Back to exit.

To activate or deactivate help text:

From the menus, select Settings > Phone settings > Help text activation >

On or Off.

A confirmation message appears in the display indicating your selection.


9



• START SCREEN

The start screen is “home base” and indicates that the phone is in the standby mode.

HOME

Signal strength

Battery level

Menu

Right selection

HOME—The name of your service provider may appear here.

Signal strength—A higher bar indicates a stronger network signal.

Battery level—A higher bar indicates more power in the battery.

Menu—The Left selection key in the standby mode accesses the menu functions.

Right selection—The Right selection key in the standby mode accesses either the

Contacts menu (default), the Go to menu, a service provider’s home page, or a user-specified function. See “Personal shortcuts” on page 61.

Quick keys

From the start screen, each scroll key takes you directly to a function:

Scroll up—Activate the flashlight.

Scroll left—Create a message.

Scroll down—Go to your list of contacts.

Scroll right—View the calendar.

Screen saver

The phone automatically activates a digital clock screen saver to save power in the standby mode. Press any key to deactivate the screen saver. For more information, see “Set screen saver timeout” on page 59.

Wallpaper

You can set the phone to display a background picture (wallpaper) when it is in the standby mode. See “Wallpaper” on page 58.



About your phone

Indicators and icons

Icon

or

Indicates...

You have one or more text or picture messages. See “Receive a message” on page 36.

You have one or more multimedia messages. See “Read and reply” on page 42.

You have one or more voice messages. See “Voice messages” on page 43.

Your phone keypad is locked. See “Lock the keypad” on page 23.

Your phone is set to the Silent profile. See “Profiles” on page 57.

The alarm clock is set to On. See “Alarm clock” on page 81.

The GPRS connection mode Always online is selected and the GPRS service is available.

You have an incoming or outgoing call during a GPRS dial-up connection. GPRS is suspended.

There is an active GPRS connection.

IR connection indicator. See “Infrared” on page 63.

Forward all voice calls. All calls are forwarded to another number. If you have two phone lines, the indicator for line 1 is and for line 2 .

If you have two phone lines, this indicates that you are on the second phone line. See “Phone settings” on page 68.

Integrated handsfree is active. See “Speakerphone” on page 5.

Calls are limited to a closed user group. See “Closed user groups” on page 26.

The timed profile is selected. See “Profiles” on page 57.

A headset, handsfree, or Nokia Loopset enhancement is connected to the phone.

Voice privacy encryption is active (or is not active) in the network.


11



• COPYRIGHT PROTECTION

Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred or forwarded.

• ACCESSIBILITY SOLUTIONS

Nokia is committed to making mobile phones easy to use for all individuals. For more information about phone features, enhancements, alternate format user guides, and other Nokia products designed with your needs in mind, visit the web site

www.nokiaaccessibility.com or call 1-888-665-4228.

• NOKIA PC SUITE

Nokia PC Suite is a collection of powerful tools that you can use to manage phone features and data. For example, with PC Suite you can manage the photos from the phone camera, create new ringing tones and wallpapers, and create new cut-out covers from your photos.

PC Suite software and documentation for the Nokia 3200 can be downloaded from the U.S. Mobile Phone products section of

www.nokia.com

.

• PHONE MENUS

Phone features are grouped according to function and are accessed through the main menus of your phone. Each main menu contains submenus and lists from which you can select or view items and customize phone features. You can access these menus and submenus by using the scroll method or by using a shortcut.

Note: Some service providers order the phones specially programmed for their network. This may mean that some features are not shown on the menu. For more information, contact your service provider.

Scroll method

1

At the start screen, select Menu.

2

In the List view, scroll through the main menus one at a time using the Scroll

up key and the Scroll down key.

OR

In the Grid view, use all four scroll keys to navigate through the main menu icons.

As you scroll through the menus, the menu number appears in the upper right corner of the display.

Below the menu number is a scroll bar with a tab.



About your phone

The tab moves up or down as you scroll through the menus, providing a visual representation of your current position in the menu structure.

In addition, in the Grid view, the icon for the selected menu is outlined, and the name of the menu appears at the top of the display.

3

When the desired menu is highlighted, press the

Left selection key.

4

If the menu contains submenus, use the scroll keys to highlight the desired menu; then press the Left selection key.

• Select Back (press the Right selection key) to return to the previous menu or submenu.

• Press the End key to return to the start screen from any main menu.

Shortcuts

You can go directly to almost any menu or submenu, as well as activate most features by using a shortcut.

Select Menu; then, within 3 seconds, press the key or keys associated with the menu function you would like to view or activate.

For example, to delete the list of missed calls, select Menu 2-4-2 (Menu > Call

log > Delete recent call lists > Missed) from the start screen. After a brief pause, the list of missed calls is deleted.


13



4 Basic operations

• INSTALL THE SIM CARD

The SIM card and its contacts can easily be damaged by scratches or bending, so be careful when handling, inserting, or removing the card.

Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.

Always switch the device off and disconnect the charger before removing the battery.

REMOVE THE BACK COVER

1

With the back of the phone facing you, push the back cover release button toward the top of the phone.

2

Lift the cover from the phone.

REMOVE THE BATTERY

3

Remove the battery by lifting it from the finger grip.

INSERT THE SIM CARD

4

Slide the SIM card holder backwards to release it.

5

Swing the SIM card holder open.



6

Insert the SIM card into the SIM card holder with the beveled corner to the top left and the golden contact area facing down.

Basic operations

7

Close the SIM card holder.

8

Slide the SIM card holder toward the top end of the phone until it locks into place.

REPLACE THE BATTERY

The SIM card must be installed before installing the battery.

9

Position the battery so the golden contacts match up with those on the phone.

The battery label should be facing up.

10 Insert the battery, contact end first into the battery slot.

11 Snap the other end of the battery into place.

REPLACE THE BACK COVER

12 Slide the back cover just below its locked position on the back of the phone.

13 Slide the back cover forward to lock the cover into place.


15



• SWITCH THE PHONE ON OR OFF

Warning: Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.

1

To turn your phone on or off, press and hold the power key on top of the phone for at least 3 seconds.

If the phone displays Insert SIM card even though the

SIM card is properly inserted, or SIM card not supported, contact your service provider.

2

If the phone asks for a PIN code, enter the PIN code

(displayed as ****) and select OK.

See “PIN code request” on page 23 for more information.

3

If the phone asks for a security code, enter the security code and select OK.

See “Security code” on page 27 for more information.

Note: If the language that appears in your display is not correct, see

“Set the display language” on page 68 for information on changing the display language.

• ANTENNA

Your device has an internal antenna.

Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed. Avoiding contact with the antenna area when operating the phone optimizes the antenna performance and the battery life.

• SET THE CLOCK

Before many functions such as call timers will operate properly, you need to set the clock.

1

From the menus, select Settings > Time and date settings > Clock >

Set the time.

2

Enter the time in hh:mm format, and select OK > am or pm.



Basic operations

• MAKE AND ANSWER CALLS

Use the keypad

1

Enter the phone number (including the area code), and press the Talk key.

To delete a character to the left of the cursor, select Clear.

2

To end the call or to cancel the call attempt, press the End key.

Use contacts

1

At the start screen, press the Scroll down key and scroll to the entry you wish to view.

To search the list of entries quickly, press any key in which the letters match the first letter of the name for which you are searching.

2

Press the Talk key to make the call or select Details to view details of the entry.

Redial a number

1

At the start screen, press the Talk key to display the last 20 numbers you have dialed.

2

Press the Talk key to redial the last number, or scroll to the number (or name) you wish to redial and press the Talk key.

Make an international call

1

Press the * key twice for the international prefix.

A plus (+) sign replaces the international access code.

2

Enter the country code, the area code without a leading zero (if necessary), and the phone number.

Make a conference call

Conference calling is a network service that allows up to six persons to take part in a conference call.

1

Make a call to the first participant.

2

To call a new participant, select Options > New call.

3

Enter the phone number of the new participant, or select Find to retrieve a number from contacts, and select Call.

The first call is put on hold.

4

When the new call picks up, select Options > Conference to connect the calls.

5

To add a new participant to the call, repeat steps 2–4.

6

To have a private conversation with one participant, select Options > Private, and select the desired participant.


17



7

Rejoin the conference call as described in step 4.

8

To end the conference call, press the End key.

Answer or reject an incoming call

• Press the Talk key to answer the call.

• Press the End key to reject the call.

• If Forward if busy is activated to your voice mailbox, the call is diverted to your voice mail. If not, the call is rejected.

• If you select Silence, only the ringing tone is muted. You can then either answer or reject the incoming call.

• If the HDB-4 or HDS-3 headset is connected, you can answer or end a call by pressing the key on the headset.

Answer a call with the keypad locked

See “Keyguard” on page 23 for more information.

To answer a call with Keyguard on, simply press the Talk key. During the call, all features function as normal. When you end or reject the call, the keypad automatically relocks.

When Keyguard is on, calls still may be possible to the official emergency number programmed into your phone. Enter the emergency number and press the Talk key.

• EARPIECE VOLUME

• To increase the volume of a call, press the Right scroll key.

• To decrease the volume of a call, press the Left scroll key.

• When adjusting the volume, a bar chart appears in the display indicating the volume level.

You can also set the phone to adjust the earpiece volume automatically. See

“Automatic volume control” on page 66 for more information.

• LOUDSPEAKER

You can use your phone as a loudspeaker during a call. Do not hold the phone to your ear during the loudspeaker operation as the volume may be very high.

• To activate the loudspeaker, select Options > Loudspeaker.

• To deactivate the loudspeaker during a call, select Options > Handset.

• The loudspeaker is deactivated automatically when a call (or a call attempt) ends or when certain enhancements are connected.

Note: When you select the New call option from the in-call menu, the loudspeaker does not automatically deactivate.



Basic operations

• OPTIONS DURING A CALL

Many of the options that you can use during a call are network services. During a call, select Options and one of the following:

Mute—Mute your voice; you can hear the other party but they cannot hear you.

Unmute—Return to normal from mute status.

End call—End the call.

End all calls—End all calls within a conference call.

Contacts—Open the contacts menu.

Menu—Display the main menus.

Hold—Place the current call on hold.

Unhold—Remove the current call from hold status.

Lock keypad—Lock the keypad to prevent an accidental key press.

New call—Place a new call; the first call is put on hold.

Conference—Call another party and invite them into the call.

Private—Have a private conversation with one participant in a conference call.

Answer—Answer another incoming call.

Reject—Reject a call; the calling party receives a busy signal.

Loudspeaker—Enable the handsfree feature in your phone.

Handset—Disable handsfree and return to normal use (earpiece).

Touch tones—Send touch tones generated by your phone keypad.

Swap—Switch between the active call and the call on hold.

Transfer—Connect a call on hold to an active call, and disconnect yourself from the calls.

Headset or Handsfree—Switch the active call to a compatible accessory when the accessory is connected to the phone.

Record—Make an audio recording of the call. (See “Voice recorder” on page 79 for more information.)

Auto volume on or Auto volume off—Set the automatic volume control on or off

(See “Automatic volume control” on page 66 for more information.)


19



5 Text entry

You can use two methods for entering text and numbers.

• Standard mode is the only way to enter names into contacts and to rename caller groups.

• Predictive text input is a quick and easy method for writing messages.

Press the # key to switch predictive text on or off and to use predictive text in various modes. Press and hold the # key to switch between text and numeric entry. As you press the # key, the following icons (not the descriptions) appear in the upper left of the display:

Icon Indicates...

Uppercase text. Predictive text is off.

Lowercase text. Predictive text is off.

Sentence case text. Predictive text is off.

Sentence case text. Predictive text is on.

Lowercase text. Predictive text is on.

• STANDARD MODE

Enter text (Abc)

• Press a key once to insert the first letter on the key, twice for the second letter, etc. If you pause briefly, the last letter in the display is accepted and your phone awaits the next entry.

• Select Clear to backspace the cursor and delete a character.

• Select and hold Clear to backspace continuously and delete characters.

• Press the 0 key to enter a space and accept a completed word.

• Press the 1 key to enter a period (.).

• Press the * key to display special characters. See “Punctuation and special characters” on page 22.

Enter numbers (123)

To switch to 123 mode from Abc mode, press and hold the # key at any message entry screen until the icon in the upper left corner of the display switches from Abc to 123 (or vice versa).



Text entry

• PREDICTIVE TEXT INPUT

Predictive text input allows you to write messages quickly using your keypad and the built-in phone dictionary. It is much faster than using the standard mode “multitap” method. You can use predictive text to write a message, or create a calendar note.

Note: When predictive text is on, the icon appears in the upper left corner of the display. When predictive text is off, the icon appears in the upper left corner of the display.

Activate predictive text

1

At any text entry screen, select and hold Options.

OR

At a text entry screen, select Options > Predictive text.

2

Select the language of your choice.

A confirmation message shows that predictive text is turned on.

Enter text

• For each letter of the word that you want to spell, press the corresponding key on your keypad only once, even if the letter you want is not the first letter on the key. The phone predicts the word you are trying to spell.

• If a displayed word is not correct, press the * key to see other matches. To move forward through a list of matches, keep pressing the * key. To return to the previous word in the list of matches, select Previous.

• Press the 0 key to accept the word, enter a space, and begin writing the next word.

• If ? appears after a word, select Spell to add the word to the dictionary. See

“Add new words to the dictionary” on page 21.

• Press the 1 key to insert a period into your message.

• Press and hold the * key to display special characters. See “Punctuation and special characters” on page 22.

Compound words

Enter the first part of the word and confirm it by pressing the Scroll right key. Enter the last part of the word and confirm it by pressing the 0 key.

Add new words to the dictionary

If you encounter a word that predictive text does not recognize, a question mark

(?) follows the word and Spell appears in the lower left of the display.

Select Spell, enter your new word using the keypad, and select Save. The word is added to the dictionary and to the message that you are writing.


21



Keep these factors in mind when adding words:

• New words that you accept by selecting Save, the 0 key, or deleting the space between two words are saved to the dictionary.

• Depending on the language and the length of the words, you may be able to add hundreds of words to the dictionary.

• When the dictionary is full, the most recent addition replaces the first.

Predictive text example

To write Nokia with predictive text on and with the English dictionary selected, press each of the following keys once:

the 6 key the 6 key the 5 key the 4 key the 2 key

The illustration above simulates your display each time a key is pressed.

• PUNCTUATION AND SPECIAL CHARACTERS

While at any text entry screen, press the * key to display special characters (press and hold the * key if predictive text is on).

Navigate through the list of special characters by using the four-way scroll keys like a joystick. Once a character is highlighted, select Insert to insert the character into your message.



Phone security

6 Phone security

An array of security features prevents accidental calls, allows you to restrict the calls your phone can make and receive, and keeps your stored information safe.

• KEYGUARD

With Keyguard, you can lock the keypad to prevent keys from being pressed accidentally.

If the keypad is locked, it unlocks when you receive a call. After the call, the lock automatically reactivates.

Lock the keypad

Select Menu > * key.

Unlock the keypad

Select Unlock > * key.

When the Keyguard is on, calls still may be possible to the official emergency number programmed into your phone. Enter the emergency number and press the Talk key.

• PIN CODE REQUEST

The PIN code protects the SIM card from unauthorized access. The PIN code can be

4–8 digits in length. After three successive incorrect entries the PIN code is blocked and you will be asked to enter the personal unblocking key (PUK) code.

Note: The PIN code must be obtained from your service provider. The PIN code is typically provided with your SIM card.

Enable your phone to request the PIN code upon power-up. This provides extra security in case your phone is lost or stolen.

1

From the menus, select Settings > Security settings > PIN code request.

After a brief pause, you are prompted to enter the current PIN code.

2

Enter the PIN code and select OK.

3

Scroll to On and select OK.

A message appears in the display confirming your selection.

• CALL RESTRICTIONS

This network service lets you restrict the calls your phone can make and receive.

Check with your service provider for details.

When calls are restricted, calls still may be possible to the official emergency number programmed into your phone.


23



Turn on call restrictions

1

From the menus select Settings > Security settings > Call restrictions and one of the following:

Outgoing calls—Calls cannot be made.

International calls—Calls cannot be made to foreign countries.

Int. calls except to home country—When abroad, calls can be made only within the current country and to your home country (that is, the country where your home network operator is located).

Incoming calls—Calls cannot be received.

Incoming calls if roaming—Calls cannot be received outside your home area.

Cancel all call restrictions—Turns off all call restrictions. Calls can be made and received in the usual way.

Note: If you selected Cancel all call restrictions, the following steps are not available. Also, you can cancel call restrictions on each option, allowing restrictions on other options to stay in force.

2

Scroll to one of the following:

Activate—Enter the restriction password and select OK.

Cancel—Enter the restriction password and select OK.

Check status—The phone lists the call types with call restriction active.

3

Select OK.

Change your restriction password

Contact your service provider for your original restriction password.

1

From the menus, select Settings > Security settings > Access codes >

Change restriction password.

2

Enter your new password, and select OK.

• FIXED DIALING

Once you set up and activate a fixed dialing list, your phone can make calls only to those numbers that you have defined in the fixed dialing list. Fixed dialing is a

Network Service and must be supported by your service provider.

When fixed dialing is activated, calls still may be possible to the official emergency number programmed into your phone.



Phone security

Set up and activate a fixed dialing list

1

From the menus, select Settings > Security Settings > Fixed dialing.

After a brief pause, the following options appear in the display:

On—Activate fixed dialing.

Off—Deactivate fixed dialing.

Number list—View the numbers in your fixed dialing list.

Note: If you activate fixed dialing and the number list is empty, all outgoing calls, except for the emergency number(s) programmed into your phone, require entry of the PIN2 code.

2

Select Number list.

Fixed dialing not active and then Fixed dialing list empty appear in the display.

You are prompted to enter the PIN2 code.

3

Enter the PIN2 code and select OK.

4

Enter the fixed dialing number, or select Find to retrieve a number from contacts and select OK.

5

Enter a name for the number and select OK.

A confirmation note appears in the display and you are returned to the fixed dialing number list.

6

Select Back > On to activate fixed dialing.

View or edit the fixed dialing list

1

From the menus, select Settings > Security Settings > Fixed dialing >

Number list.

You are prompted to enter the PIN2 code.

2

Enter the PIN2 code and select OK.

Any numbers which you have assigned to fixed dialing appear in the display.

3

Scroll to a number and select Options.

The following options appear in the display.

View number—View the number for an entry.

Add—Add a number to your fixed dialing list.

Edit—Edit the highlighted entry.

Delete—Delete the highlighted entry.

Delete all—Delete all entries in your fixed dialing list.

4

Select the desired option.


25



Notes about fixed dialing

• If a SIM card with fixed dialing that is activated is inserted into a phone that does not support fixed dialing, the SIM card is rejected.

• If you try to add a name without a number to the fixed dialing list, you will receive an error message.

• If you try to browse the fixed dialing list but have not stored any numbers,

Fixed dialing list empty appears in the display.

• You cannot access SIM memory manually (view or copy numbers on the SIM card) while fixed dialing is active.

• CLOSED USER GROUPS

This network service specifies the group of people whom you can call and who can call you. Default resets the phone to use a user group that the SIM card owner has agreed upon with the service provider.

When calls are limited to closed user groups, calls still may be possible to the official emergency number programmed into your phone.

Turn on closed user groups

1

From the menus, select Settings > Security settings > Closed user group > On.

2

Enter the group number, then select OK.

Turn off closed user groups

From the menus, select Settings > Security settings > Closed user group > Off.

• SECURITY LEVELS

The security level determines your access to features when a nonowner SIM card is used. A nonowner SIM card is one (other than the original) that is inserted after you power off the phone. There are three security levels:

Off—Owner and Nonowner cards are treated the same.

Memory—Nonowner cards can access SIM memory. Any changes to the memory setting requires the security code.

The owner card has access to all features, but the security code is required to change a memory setting.

Phone—The security code is required upon power-up.

Use this procedure to set your security level.



Phone security

1

From the menus, select Settings > Security settings > Security level.

After a brief pause, you are prompted to enter the security code.

The default code is 12345.

2

Enter the security code and select OK > Off, Memory, or Phone.


• ACCESS CODES

With the following access codes, you can keep your information safe:

• Security code (4–8 digits)

• PIN code and PIN2 code (4–8 digits)

• PUK code and PUK2 code (8 digits)

• Call barring password (4 digits)

Note: Avoid using codes similar to emergency numbers such as 911 to prevent accidental dialing of the emergency number.

Security code

The security code controls access to features such as the security level and is supplied with the phone. The preset code is 12345.

Note: If you enter the wrong security code five times in succession, you will not be able to enter a code for five minutes, even if you power off the phone between incorrect entries.

Once you change the security code from its preset of 12345, keep the new code secret and in a safe place separate from your phone. Use this procedure to change your security code.

1

From the menus, select Settings > Security settings > Access codes >

Change security code.

After a brief pause, you are prompted to enter the current security code

(default is 12345).

2

Enter the current security code and select OK.

You are prompted to enter the new security code.

3

Enter the new security code (up to 10 characters) and select OK.

You are prompted to reenter the new security code for verification.

4

Enter the new security code again and select OK.

A message appears in the display confirming your security code has been changed.


27



PIN code

Before you can change your PIN code, you need to enable PIN code request. See

“PIN code request” on page 23.

1


Change PIN code.

After a brief pause, you are prompted to enter the current PIN code.

2

Enter the PIN code and select OK.

You are prompted to enter the new PIN code.

3

Enter the new PIN code and select OK.

You are prompted to reenter the new PIN code for verification.

4

Enter the new PIN code and select OK.

A message appears in the display confirming your PIN code has been changed.

PIN2 Code

The PIN2 code is required for features such as Fixed dialing. If you enter an incorrect PIN2 code three times in succession, the PIN2 code is blocked and you will have to enter the PUK2 code.

Note: The original PIN2 code must be obtained from your service provider.

Use this procedure to change your PIN2 code.

1


Change PIN2 code.

You are prompted to enter the current PIN2 code.

2

Enter the current PIN2 code and select OK.

You are prompted to enter the new PIN2 code.

3

Enter the new PIN2 code and select OK.

You are asked to verify the new PIN2 code by entering it again.

4

Enter the new PIN2 code and select OK.

A message appears in the display confirming you have changed the PIN2 code.

Personal unblocking key (PUK) codes

PUK and PUK2 codes are used to restore blocked PIN and PIN2 codes. Both PUK and

PUK2 codes are eight characters in length and cannot be changed. PUK and PUK2 codes must be obtained from your service provider.

If you enter an incorrect PUK or PUK2 code 10 times in succession, SIM rejected appears in the display and the SIM card can no longer be used. You must contact your service provider for a new SIM card.



Messages (Menu 1)

7 Messages (Menu 1)

All messaging features are Network Services. If you have subscribed to a message service, you can send and receive messages to compatible phones that are also subscribed to a message service.

You can also send and receive picture messages, multimedia messages, and e-mail to compatible phones if supported by your network. See “Text entry” on page 20 for more information.

Note: When your phone is dedicated to a call in progress, a Java application

(such as a game), or an active browser connection, then the phone cannot receive multimedia messages.

• LINKED MESSAGES

Your device supports the sending of text messages beyond the normal 160-character limit. If your message exceeds 160 characters, it will be sent as a series of two or more messages. In the navigation bar, you can see the message length indicator counting backwards from 160. For example, 10 (2) means that you can still add 10 characters for the text to be sent as two messages.

Using special (Unicode) characters, such as ë, â, á, ì, takes up more space. If there are special characters in your message, the indicator may not show the message length correctly. Before the message is sent, the phone tells you if the message exceeds the maximum length allowed for one message. You can cancel sending by pressing Cancel or you can save the message in the inbox.

While receiving linked messages, you can start reading the first part before the phone has received the entire message. While viewing a linked message, you can start reading the first part before the phone has received the entire message. While viewing the message, you may see *some text missing* on the display. This is normal, and the message content will be updated as soon as the missing sequence arrives.

If the memory is full, you may have to delete a message from your inbox or outbox before your phone can update the missing text. See “Delete messages” on page 33 for more information.

• BEFORE YOU CAN SEND AND RECEIVE

MESSAGES

You will need the following to send and receive messages:

• A messaging service through your service provider

• A message center number, which must be saved to your phone (if your service provider has not done so already). See “Save your message center number” on page 31.


29



• ICONS

Icons that precede the title of a message indicate the following:

The message has not been read.

The message has been read.

The message which you have composed has not been sent.

i

The message which you have composed has been sent.

The message is a delivery report.

The message is a MMS (multimedia message).

• OPTIONS

When you create a text or multimedia message, the following options are available:

Send—Send the message to one recipient.

Sending options—Select Send to many to send the message to one of your fixed calling groups. Select Sending profile to send the message to one of your predefined profiles.

Clear text—Erase the text clipboard.

Save message—Select Archive to save the message in your archive. Select

Templates to save the message as one of your predefined templates.

Insert contact—Insert a name from contacts into your message.

Insert number—Insert a number from contacts into your message.

Use template—Insert a predefined template into your message.

Insert picture—Insert a picture from the gallery into your message.

Exit editor—Save the message to your archive automatically and leave the message editor.

Insert smiley—Insert a text-based “emotional icon” into your message.

Insert word—While in predictive text mode, use standard mode to enter a word and insert it into your message.

Edit word—While in predictive text mode, use standard mode to edit the current word.

Insert symbol—Insert a special character into your message.

Predictive text—Turn the predictive text utility on or off.



Messages (Menu 1)

Matches—While in predictive text mode, view a list of possible alternatives to the current word.

When you view a text, picture, or multimedia message, or e-mail, some or all of the following options are available:

Delete—Delete the message you are viewing.

Reply—Reply to the message; you have the option to include the original text in the reply, a template, or empty screen.

Use detail—Extract numbers, e-mail addresses and website addresses from the current message.

Forward—Forward the message to another recipient.

Edit—Edit the message.

Move—Move the message to a folder you specify.

Rename—Rename the message before it is saved to a folder.

Copy to Calendar—Copy text from the beginning of the message to your phone’s calendar as a memo for the current day.

Message details—View the sender’s name and phone number, the message center used, reception date and time.

• DEFAULT MESSAGE TYPE

You can choose the type of message sent by your phone. Types include Text,

E-mail, Page, and Fax. The default message type is Text. This feature is a Network

Service and must be supported by your service provider.

1

From the menus, select Messages > Message settings > Text messages >

Sending profile > Default profile > Messages sent via.

2

Select the message type of your choice.


• FONT SIZE

From the menus, select Messages > Message settings > Other settings > Font

size > Small font or Large font.


• SAVE YOUR MESSAGE CENTER NUMBER

Messages sent by your phone are routed through your service provider’s message center. Normally, this number is saved to your phone by your service provider. To save the number manually, do the following:


31



1


Sending profile > Default profile > Message center number.

2

If the box in the display is empty or contains an incorrect number, enter the number given by your service provider and select OK.

OR

If the box in the display contains the correct number, select OK.

A message appears in the display confirming your number is saved.

• ORGANIZE MESSAGES WITH FOLDERS

Folders

Inbox—Messages are automatically stored in the inbox after they have been read or if you select Exit when Message received appears on the start screen.

Sent items—Messages that you send are automatically stored in this folder.

Saved items—Store saved multimedia messages.

Outbox—Multimedia messages are saved in the Outbox folder until they are sent.

Archive—Store messages that have been read in the Archive folder.

Templates—Pictures and prewritten templates are stored in the Templates folder.

Preloaded templates can be edited and customized.

My folders—You can create new folders for storing messages.

Save messages to folders

You can save messages to an existing folder or to a folder that you created.

1

From the menus, select Messages > Text messages > Create message.

2

Write your message and select Options > Save message.

3

Select either Archive, Templates, or the name of a folder which you created.

The message is saved.

View saved messages

1

From the menus, select Messages > Text messages > Inbox.

2

Select the folder containing the message you wish to view.

3

Once the folder opens, select the message you wish to view.

Move a message to a folder

1

While viewing the message, select Options > Move.

2

Select the destination folder.



Messages (Menu 1)

My folders

Keep your messages organized by creating custom folders and saving some of your messages there.

ADD A FOLDER OF YOUR OWN

1

From the menus, select Messages > Text messages > My folders.

2

If you have not created a folder before, select Add.

OR

If you have already created other folders, select Options > Add folder.

3

Enter a name for the new folder and select OK.

The folder is added.

REMOVE A FOLDER

Only folders created in My folders can be deleted. The Inbox, Outbox, Archive, and

Template folders are protected. When you delete a folder, all messages in the folder are also deleted.

1

From the menus, select Messages > Text messages > My folders.

Any folders that you have created appear in the display.

2

Scroll to the folder you wish to remove and select Options > Delete folder.

You are asked to confirm the deletion.

3

Select OK to delete or Back to exit.

• DELETE MESSAGES

If your message memory is full and you have more messages waiting at the network,

blinks in the start screen. You can do the following to create more space:

• Read some of the unread messages and then delete them.

• Delete messages from some of your folders.

A single message

To delete a single message, you need to open it first.

1

From the menus, select Messages > Text messages.

2

Select the folder containing the message you want to delete.

A list of messages, if you have any, appears in the display.

3

Select the message you want to delete.

The message opens.


33



4

Select Options > Delete.

You are asked to confirm the erasure.

5

Select OK to delete the message or Back to exit.

All messages in a folder

1

From the menus, select Messages > Text messages > Delete messages.

2

Select the folder containing the messages you want to delete.

You are asked to confirm your erasure.

Warning: If you select All messages, it deletes any messages which have been read in all of the folders.

3

Select OK to empty the folder or Back to exit.

• MESSAGE SETTINGS

Text, picture, and e

-

mail message settings

Note: Service providers may customize the text message settings interface.

For more details about text message services, contact your service provider.

1

From the menus, select Messages > Message Settings > Text messages >

Sending profile.

2

If more than one message profile set is supported by your SIM card, select the set you want to change.

3

Select one of the following:

Message center number—Save the phone number of the message center, which is necessary for sending text messages; obtain this number from your service provider.

Messages sent via—Select the message type Text, E-mail, Page, or Fax.

Message validity—Define how long the network attempts to send your messages before it gives up.

Default recipient number—Save a phone number where messages are sent by default when this sending profile is used. This option appears when the

Messages sent via setting is Text.

E-mail server—Save the phone number of the e-mail server where messages are sent by default when this sending profile is used. This option appears when the Messages sent via setting is E-mail.

Delivery reports—Request the network to send delivery reports on your messages.

Use GPRS—Set GPRS as the preferred method of sending text messages.



Messages (Menu 1)

Reply via same center—Allow the recipient of your message to send you a reply message using your message center (network service).

Rename sending profile—Change the name of the sending profile. (The name of the default profile cannot be changed.)

4

Follow the prompts to change the selected setting.

Overwrite messages

When the message memory is full, your phone cannot send or receive any new messages. However, you can set your phone to automatically replace old messages in the Inbox and Sent items folders when new ones arrive.

1


Overwriting in sent items or Overwriting in inbox.

2

Select Allowed to replace the old messages with new ones in the Sent items or Inbox folder, respectively.

Multimedia message settings

1

From the menus, select Messages > Message settings > Multimedia msgs. and one of the following:

Save sent messages—Save sent multimedia messages to the Sent items folder.

Delivery reports—Request the network to send delivery reports on your messages.

Scale image down—Select whether images are scaled to a smaller size when inserted into a message.

Default slide timing—Set the default interval for slides in your presentations.

Enter the time in mm:ss format and select OK.

Allow multimedia reception—Choose Yes, No, or In home network for your multimedia service. In home network cannot receive multimedia messages outside the home network.

Incoming multimedia messages—Select Retrieve to receive multimedia messages, or Reject if you do not wish to receive multimedia messages.

Connection settings—Define connection parameters for multimedia data transfer.

Allow advertisements—Enable or disable reception of automatic multimedia advertisements. This setting is not shown if Allow multimedia reception is set to No.

2

Follow the prompts to change the selected setting.

Multimedia connection settings

Contact your service provider for the settings.


35



From the menus, select Messages > Message settings > Multimedia msgs. >

Connection settings > Edit active multimedia settings; then select each of the following in turn and enter the settings provided by the service provider.

Settings’ name—Rename the setting to your preference.

Homepage—Enter the homepage where your browser retrieves multimedia messages and select OK.

Session mode—Select session mode Temporary or Permanent.

Data bearer—Select the data bearer (always GPRS).

Bearer settings—Set each of the following settings for the data bearer:

• GPRS access point—Enter the access point name and select OK.

• IP address—Enter or change the IP address and select OK.

• Authentication type—Select either Normal or Secure.

• User name—Edit or enter your user name and select OK.

• Password—Edit or enter a password and select OK.

Receive multimedia connection settings

You may be able to receive multimedia connection settings as a text message from your service provider. For more information, contact your service provider.

• WRITE AND SEND A TEXT MESSAGE

1


OR

Press the Scroll left key at the start screen.

2

Compose a message using the keypad and select Options > Send.

3

Enter the recipient’s phone number, or select Find to retrieve a number from contacts, and select OK.

Your message is sent.

Note: When sending messages, your device may display the words Message

sent. This is an indication that the message has been sent by your device to the message center number programmed into your device. This is not an indication that the message has been received at the intended destination.

For more details about messaging services, check with your service provider.

• READ MESSAGES

Receive a message

When you receive a text or picture message or e-mail,

n

Message(s) received appears in the display, where

n

is the number of new messages.



Messages (Menu 1)

The blinking indicates that the message memory is full. Before you can receive new messages, delete some of your old messages. See “Delete messages” on page 33 for more information.

Select Show to view the message now, or Exit to view it later.

Read the message later

1

From the menus, select Messages > Text messages > Inbox.

2

If more than one message is received, scroll and select the message you want to read. Unread messages are indicated by .

• REPLY TO A MESSAGE

1

While viewing a message, select Options > Reply.

2

Select a Start reply with option:

•

Empty screen

•

Original text

•

Template

•

Yes

•

No

•

OK

•

Thank you

•

Congratulations

•

Happy birthday

•

I love you too

•

Hugs and kisses

•

Sorry

•

Sorry, I’m late

3

Compose your reply using the keypad, then select Options > Send.

4

Enter the recipient’s phone number, or select Find to retrieve a number from contacts.

5

Select OK.

• FORWARD A MESSAGE

1

While viewing a message, select Options > Forward > Via text message or

Via e-mail.


37



2

Follow the prompts to forward the message.

• PICTURE MESSAGES

Your phone comes with 10 preloaded pictures. You can, however, overwrite any of the

10 pictures that come with your phone. Pictures can be attached to a message and sent using a text message to compatible phones. Picture messages behave the same as text messages, but pictures take up more space than text. Pictures are stored in the Templates folder under Messages > Text messages > Templates.

Note: You cannot send a picture message using e-mail.

Download pictures

Your phone can download pictures, or receive them from compatible phones using text messaging to use in messages. You can also create pictures and send them to your phone or other compatible phones using Nokia PC Suite.

Note: This function can be used only if it is supported by your service provider.

Only phones that offer compatible picture message features can receive and display picture messages. Contact your service provider for details.

Receive a picture message

When you receive a picture message, your phone beeps and Message received appears in the display as well the message icon ( ).

VIEW A PICTURE MESSAGE

1

Select Show to view the picture message, or select Exit to move it to your inbox.

2

If you have more than one picture message, scroll and select the message that you want to view.

is Note: When you have unopened picture messages in your inbox, shown in the upper left corner of the start screen as a reminder.

3

Use the scroll keys to view the whole picture if necessary.

4

Keep scrolling to view other information, such as the sender number and time the message was sent.

5

Once you are finished, select Exit to move the picture message to the inbox, or select Options for other choices, such as Reply or Forward.

SAVE A PICTURE FROM A PICTURE MESSAGE

1

Select Options > Save picture.

2

Enter a title for the picture and select OK.

Note: If your templates folder is full of pictures, scroll to the picture you would like to replace and select Select.



Messages (Menu 1)

Compose and send a picture message

One picture message is equivalent in size to three text messages. When you insert one of the preloaded pictures into a message, you will have enough remaining space for about 121 characters in the message. If you try to insert a picture into a message that is almost full of text, a beep sounds and you are prompted to delete some text before proceeding.

1


2

Write a message using the keypad (or enter nothing if you choose to just send a picture), and select Options.

Note: Insert pictures before adding text. You can then check remaining space for text in the upper right corner of the display.

3

Select Insert picture.

A list of pictures appears in the display.

4

Scroll to a picture and select View.

5

To insert the picture into your message, select Insert.

OR

To view another picture, select Back, scroll to another picture, and select View.

6

To send the picture message, select Options > Send.

7

Enter the phone number for your recipient, or select Find to retrieve a number from contacts, and select OK.




Preview, change, or delete a picture message

1

After a picture has been inserted into your message, select Options at the message edit screen.

2

Select one of the following options:

Preview—Preview the inserted message before sending. Select Back to return to the list of options.

Change picture—Go back to the picture list. Scroll to highlight a new picture, select View and then select Insert to replace the previous picture in your message.

Delete picture—Select OK to delete the picture from your message, or select

Back to return to the list of options.


39



• E-MAIL

You can send e-mail up to 160 characters in length (including the e-mail address) to anyone with an e-mail address. First, you will need to set up an e-mail profile and modify a few other settings. It takes just a few minutes, and you only need to do this once. See “Text, picture, and e-mail message settings” on page 34.

Note: You cannot insert pictures into e-mail.

Write and send e-mail

1

From the menus, select Messages > Text messages > Create SMS e-mail.

2

Enter the e-mail address, or select Find to retrieve an e-mail address from contacts, and select OK.

3

Enter a subject for the e-mail and select OK.

4

Compose your e-mail, leaving enough space in the total character count (160) for the e-mail address, and select Options > Send e-mail.

5

Enter the e-mail server number and select OK.




• MULTIMEDIA MESSAGES

This is a Network Service.

Note: Only devices that offer compatible multimedia message or e-mail features can receive and display multimedia messages. Multimedia message objects may contain viruses or otherwise be harmful to your device or PC.

Do not open any attachment if you are not sure of the trustworthiness of the sender.

A multimedia message can contain text, one image, and one sound clip. Your phone can send and receive multimedia messages that are up to 100 KB. If the maximum size is exceeded, the phone may not be able to receive the message. Depending upon your network, you may receive a message that includes an Internet address where you can go to view the multimedia message. Pictures are scaled to fit the display area of the phone. Your phone has a multimedia message viewer for playing messages and a multimedia inbox for storing saved messages. Once you save the multimedia message, you can use the image as a screen saver or the sound as a ringing tone.



Messages (Menu 1)

Multimedia messages cannot be received during a call, while using a game or other Java application, or when you are in an active browsing session using the

GSM data bearer.

Because delivery of multimedia messages can fail for a variety of reasons, do not rely solely on them for essential communication.

The default setting of the multimedia message service is on.

The appearance of a multimedia message may vary depending on the receiving device.

If a received message contains unsupported elements, they may be replaced with the text Object format not supported.

Before you can use the multimedia message feature, you must define the multimedia message settings. See “Multimedia message settings” on page 35 for more information.

Write and send

For availability and subscription to the MMS, contact your service provider.

1

From the menus, select Messages > Multimedia msgs. > Create message.

2

Enter the text of your message and select Options >Insert > Image or Sound clip.

The list of available folders in the Gallery is shown.

3

Open the desired folder, scroll to the image or sound clip, and select

Options > Insert.

The indicator in the header of the message indicates that a picture or sound clip has been attached.

Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred, or forwarded.

4

To add a new page (also called a “slide”) to the message, select Options >

Insert > Slide.

Each slide can contain text, one image, and one sound clip. If the message contains several slides, you can open the desired slide by selecting Previous

slide, Next slide, or Slide list.

5

To set the time interval between the slides, select Options > Slide timing.

6

To move the text to the top or bottom of the message, select Options > Text

on top or Text on bottom.

7

To insert a name from contacts, select Options > More options > Insert contact.

8

Scroll to the desired name and select Options > Insert contact.

9

To insert a number, select Options > More options > Insert number, enter the number or search for it in contacts, and select OK.

10 To delete an image, slide, or sound clip from the message, select Options >

Delete > Image, Sound clip, or Slide.


41



11 To add a subject to the message, select Options >More options > Edit subject, enter a subject, and select OK.

12 To view the message before sending it, select Options > Preview.

13 To save the message to the Saved items folder, select Options > Save message.

14 To send the message, select Options > Send to number, Send to e-mail, or

Send to many.

Note: If you have attached a picture to the message, you cannot send the message using e-mail.

15 Enter the recipient’s number or e-mail address, or search for it in contacts, then select OK.

The message is moved to the Outbox folder for sending.

Note: It takes more time to send a multimedia message than to send a text message. While the multimedia message is being sent, the animated indicator

is displayed and you can use other functions on the phone. If there is an interruption while the message is being sent, the phone tries to resend it a few times. If this fails, the message remains in the Outbox folder and you can try to resend it later. Check your Outbox folder for unsent messages.




Read and reply

When a multimedia message is being received, the animated indicator appears in the display. Once the message has been fully downloaded,

message received appear in the display.

and Multimedia

If the indicator blinks, the memory for multimedia messages is full. You must delete old messages before you can receive new ones. See “Delete messages” on page 33.

1

To view the message immediately, select Show. To view the message later, select Exit.

2

While viewing the message, select Options and one of the following:

Delete message—Delete a saved message.

Reply or Reply to all—Reply to the message. Select Options and then Send.

The sender’s phone number or e-mail is used as the default.

Forward to number—Forward the message to another number.

Forward to e-mail—Forward the message to an e-mail address.



Messages (Menu 1)

Forward to many—Forward the message to multiple recipients.

Message details—View the message subject, size, and class.

Play presentation—View the slides of the message in sequence.

Continue present.—Continue to view the message after stopping it.

View text—View the text part of the message.

Open image—View the image included in the message. Select Options to zoom the image, save it in the gallery, set its contrast, or view its details.

Open sound clip—Select Options to play the sound clip, save it in the gallery, or view its details.


• VOICE MESSAGES

If you subscribe to voice mail, your service provider will furnish you with a voice mailbox number. You need to save this number to your phone to use voice mail.

When you receive a voice message, your phone lets you know by beeping, displaying a message, or both. If you receive more than one message, your phone shows the number of messages received.

Save your voice mailbox number

Your service provider may have already saved your voice mailbox number to your phone. If so, the number will appear in the display in step 2. Select OK to leave the number unchanged.

1

From the menus, select Messages > Voice messages > Voice mailbox number.

After a brief pause, the Mailbox number screen appears.

2

If the box is empty, enter the voice mailbox area code and number and select OK.

The phone confirms that the number has been saved.

Save yourself the trouble of entering the mailbox codes each time you dial voice mail. See “Automate voice mail” on page 44.

Call and set up your voice mail

1

Once you have saved the voice mailbox number, press and hold the 1 key.

2

When you connect to voice mail and the prerecorded greeting begins, follow the service’s automated instructions to set up your voice mail.

Listen to your voice messages

Once you have set up voice mail, you can dial the number in one of four ways:

• Dial the number using the keypad.


43



• Press and hold the 1 key.

• Select Listen if there is a notification message in the display.

• From the menus, select Messages > Voice messages > Listen to

voice messages.

Once you connect and the prerecorded greeting begins, follow the automated instructions to listen to your voice messages.

Automate voice mail

You can insert special characters called dialing codes into phone numbers such as voice mail and then save the number to a 1-touch dialing location. Dialing codes instruct the receiving system to pause, wait, bypass, or accept the numbers that follow them in the dialing string.

Note: Each voice mail service can vary. The examples and steps that follow are for clarification. Check with your service provider if you have specific questions about your voice mail service.

WRITE DOWN SOME INFORMATION

You will need this information in “Set up voice mail with dialing codes” on page 45.

Be sure to record all of the information correctly.

1

Write down your voice mailbox number.

2

Call and check your voice mail as you normally would.

3

Write down your interaction with the recorded prompts step-by-step. Keep in mind that each voice mail service may vary. However, it should look something like this:

Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, press # key.

INSERT DIALING CODES

Press the * key repeatedly to cycle through dialing codes. Once the desired code appears in the display, pause briefly and the code is inserted into the dialing string.

For example, press the * key four times to display w (wait character). Pause briefly and the wait character is inserted into the dialing string. Available dialing codes are as follows:

*

Bypasses a set of instructions.

+

Precedes an international telephone number.

p

Pauses for 2.5 seconds before sending any numbers that follow.

w

Wait. Your phone waits for you to press the Talk key before it sends any numbers or codes that follow.



Messages (Menu 1)

SET UP VOICE MAIL WITH DIALING CODES

1

At the start screen, select Contacts > 1-touch dialing.

2

Scroll to an empty 1-touch dialing slot and select Assign.

3

Enter your voice mailbox number, including the area code.

4

Enter any dialing codes as necessary.

For example, if you pause for 5 seconds after connecting to voice mail, enter

p twice after the voice mailbox number, such as 2145551212pp.

5

Enter any remaining pauses, PIN codes, and other information that allows you to listen to your messages, and select OK.

6

Enter a name (such as Voice Mail) and select OK.

A message appears in the display confirming your 1-touch dialing location has been saved.

7

To dial and listen to your voice mail, select and hold the assigned 1-touch dialing key at the start screen.

No other keypresses should be necessary to connect and listen to your messages.

• INFO MESSAGE SERVICE

With the info message network service, you can receive short text messages from your service provider on various topics, such as weather and traffic conditions.

Contact your service provider for more information.

From the menus, select Messages > Info messages, and one of the following:

Info service—Select On or Off to activate or deactivate the service, or Topic index to activate index reception.

Topics—Add, select, edit, and delete info topics.

Language—Select the language in which info messages are received. The language you select does not affect the language you select under the Phone settings menu.

Info topics saved on SIM card—Select one or more info topics to save to your

SIM card.

Read—Read messages received from your service provider. This option only appears if info messages have been received.

• SERVICE COMMANDS

Use the Service commands editor to enter and send service requests (also known as USSD commands) to your service provider. Contact your service provider for information about specific service commands.

1

From the menus, select Messages > Service commands.

2

In the Message edit screen, enter a service request, such as an activation command for a specific network service, and select Send.


45



8 Call log (Menu 2)

Call log stores information about up to the last 10 missed, 10 received, or 10 dialed calls. It also adds the total duration of all calls. When the number of calls exceed the maximum, the most recent call replaces the oldest.

For Call log to work properly:

• Your service provider must support caller ID, and it must be enabled.

• Your calls cannot be blocked.

• Your phone must be on and within the service area.

Note: Some timers, including the life timer, may be reset during service or software upgrades.

• OPTIONS

The following options are available from the call log menu:

Missed calls—Show the phone numbers of unanswered incoming calls.

Received calls—Show the phone numbers of the most recently answered incoming calls.

Dialed numbers—Show the most recently dialed numbers.

Delete recent call lists—Clear phone numbers from recent call lists.

Call timers—View the duration of recent calls and clear the call timers.

GPRS data counter—Show the amount of sent and received GPRS and EDGE data and reset the counters.

GPRS connection timer—Show the duration of GPRS and EDGE data connections and reset the timers.

• VIEW CALLS OPTIONS

Whether you are viewing missed, received, or dialed calls, the menu options are the following:

Call time—Display the date and time of the call.

Send message—Send a message to the number.

View number—Display the number.

Edit number—Edit the number and associate a name with the number.

Save—Enter a name for the number and save it to contacts.

Add to contact—Add the number to an existing entry in contacts, if the number is not associated with a name.

Delete—Clear the number from memory.

Call—Call the number.



Call log (Menu 2)

• MISSED CALLS

Missed calls are calls that were never answered. You can check for missed calls in two ways:

Note: The missed calls feature does not function while your phone is off or outside of the service area.

1

If # missed call appears in the display, select List.

The phone number appears in the display.

2

Select Options, then select the desired option from the list.

See “View calls options” on page 46.

OR

1

From the menus, select Call log > Missed calls.

2

Scroll to a name or number and select Options and the desired option from the list.


• RECEIVED CALLS

Received calls are calls that have been answered.

1

From the menus, select Call log > Received calls.

2



• DIALED NUMBERS

You can view dialed numbers in one of two ways:

1

At the start screen, press the Talk key.

OR

From the menus, select Call log > Dialed numbers.

2




47



• CALL TIMES

You can receive up to five calls from the same number and view the time each call occurred. Your clock must be set for this feature to work accurately. See “Set the clock” on page 16 for instructions on setting your clock.

1

While viewing dialed numbers or a missed or received call, select Options >

Call time.

The time that the last call occurred appears in the display.

2

Press the Scroll down key to view other call times from this number.

3

Select Back to return to the options list.

• DELETE CALL LISTS

To clear any missed, dialed, or received calls from phone memory, select Call log >

Delete recent call lists > All, Missed, Received, or Dialed.

• CALL DURATION

From the menus, select Call log > Call timers and one of the following:

Duration of last call—Show the duration of the last call received.

Duration of received calls—Show the duration of all received calls.

Duration of dialed calls—Show the duration of all dialed calls.

Duration of all calls—Show the duration of all calls (missed, dialed, and received).

Clear timers—Reset all call timers to zero.



Contacts (Menu 3)

9 Contacts (Menu 3)

You can save names and phone numbers in the phone memory and in the SIM card memory. The number of contacts that can be saved depends on their length, and the number and length of related phone numbers and text items.

The phone supports SIM cards that can save up to 250 names and phone numbers.

Contacts saved in the phone memory use shared memory.

• MENU

From the menus, select Contacts and one of the following:

Find—Find a name or select from a list.

Add contact—Add a name to contacts.

Delete—Delete a name and its associated numbers.

Copy—Copy entries from phone memory to SIM and vice versa.

Settings—Set memory in use (Phone, SIM card, or Phone and SIM), change contacts view, and check the memory status of your phone and SIM card.

1-touch dialing—Display the list of 1-touch dialing numbers saved to memory.

Info numbers—Display a list of information numbers related to your service provider (if available).

Service numbers—Display a list of service numbers related to your service provider

(if available).

Own numbers—View the numbers assigned to your SIM card.

Caller groups—View and edit the properties (such as the ringing tone) for any of the caller groups.

• TYPES OF INFORMATION

Each contact entry can contain one or more of the following types of information:

General phone number

Mobile phone number

Home phone number

Work phone number


49



Fax number

E-mail address

Web address

Street address

Note

• SAVE INFORMATION

You can save names and numbers to phone memory or to SIM memory.

Quickly save a name and number

1

At the start screen, enter the phone number you wish to save.

2

Select Options > Save.

3


A confirmation message appears in the display indicating your entry has been saved.

Quickly save (only) a number

You can save a phone number as a stand-alone entry in contacts.

1

At the start screen, enter the number you wish to save.

2

Select and hold Options.

A message appears in the display confirming your number is saved.

Save an entry

1

At the start screen, select Contacts > Add contact.

2

Enter a name and select OK.

3

Enter a number and select OK.

4

Select Done to return to the start screen.

Save multiple numbers and text items

For each entry in phone memory, you can save different types of phone numbers and short text items. (SIM card memory can have only one name and number per entry.) The first number you save for any entry is automatically set as the default, or primary number. It is indicated with a frame around the number type indicator.

1

Make sure that the memory in use is either Phone or Phone and SIM.

See “Select contacts view and memory” on page 56.



Contacts (Menu 3)

2

At the start screen, press the Scroll down key and scroll to the entry to which you wish to add a number or text item.

3

Select Details > Options > Add number or Add detail and the desired number or text type.

See “Types of information” on page 49.

4

Enter a number, address, or note, and select OK.

5

To change the number or text type, with a contact entry highlighted, select

Options > Change type and the desired type.

6

Press the End key to return to the standby mode.

Save addresses and notes

To save an e-mail address, you will need to add it to an existing entry (name).

1

Find the entry (name) in contacts to which you would like to add an address or note.

2

With the entry highlighted, select Details > Options > Add detail > E-mail

address, Web address, Street address, or Note.

3

Enter the text for the note or address and select OK.

• CHANGE THE DEFAULT (PRIMARY) NUMBER

1

At the start screen, press the Scroll down key, scroll to the entry you want to change, and select Details.

2

Scroll to the number you wish to set as default and select Options > As

primary number.

• SEARCH FOR AN ENTRY

1

At the start screen, press the Scroll down key to display the contents of contacts.

2

Press the key which corresponds to the first letter of the name for which you are performing a search.

The icon appears at the bottom of the display to indicate you are performing a search.

3

Press the Scroll up key or the Scroll down key to scroll up and down through names and numbers in the list.

4

Select Details to view the details of the selected entry.

5

Use the Scroll up and Scroll down keys to scroll through the details of the entry, if necessary.


51



• MAKE A CALL

At the start screen, press the Scroll down key, scroll to the entry for the person you want to call, and press the Talk key.

The phone dials the primary number for the contact.

• ADD AN IMAGE TO A NAME OR NUMBER

You can add an image to a name or number saved in phone memory. The image is displayed when you receive a call from that phone number.

1

At the start screen, press the Scroll down key.

2

Scroll to the name or number to which you want to add an image, and select

Details > Options > Add image.

The display shows the list of folders in the Gallery.

3

Scroll to a folder that contains images and select Open.

4

Scroll to the desired image and select Options > Save to contacts.

A copy of the image is added to the contact.

Note: You can use the phone to take a photo and attach it to the contact.

See “Take a photo” on page 76 for more information.

• EDIT AN ENTRY

1

At the start screen, press the Scroll down key.

2

Scroll to the entry that you want to edit and select Details.

3

Scroll to the item you want to edit, and select Options.

The list of available options varies according to the type of item selected.

4

Select an option and follow the prompts to edit the item.

• DELETE NAMES AND NUMBERS

1

At the start screen, select Contacts > Delete.

2

To delete individual names and numbers, select One by one.

3

Scroll to the entry you wish to delete, select Delete > OK to confirm the deletion.

4

To delete the entire contents of contacts, select Delete all > Phone or SIM

card > Delete > OK.

You are asked to enter the security code.

5

Enter the security code and select OK.



Contacts (Menu 3)

• COPY ENTRIES

1

At the start screen, select Contacts > Copy > From phone to SIM card or

From SIM card to phone and one of the following:

One by one—Selects and copies entries one by one. Go to step 2.

All—Copies all entries from the SIM card or phone. Go to step 3.

Primary numbers—Copies only primary numbers. This appears only if you selected From phone to SIM card. Go to step 3.

2

Scroll to the entry you wish to copy and select Copy > Keep original or

Move original.

Warning: Select Keep original if you are unsure of which copy method to use. This ensures original entries are merely copied to the new location.

Move original deletes files after copying.

The entry is copied and you are returned to the list of contacts entries.

3

If you selected All or Primary numbers in step 1, select Keep original or Move

original > OK to confirm your choice.

All entries are copied to the selected destination.

4

Select Back to return to the list of contacts entries, or press the End key to return to the start screen.

• BUSINESS CARDS

You can send and receive an entry in contacts using IR or text message, if supported by your service provider.

Receive a business card using IR

1

From the menus, select Settings > Connectivity > Infrared to ensure IR is activated.

IR remains active for 2 minutes.

When you receive the business card, your phone beeps and a message appears in the display.

2

Select Save to save the business card in phone memory, or select Exit > OK to discard the business card.

Send a business card

You can send a business card using IR or as a text message to a compatible phone or other handheld device.

1

Highlight an entry from contacts that you wish to send and select Details >

Options > Send bus. card.


53



2

To send the business card using IR, make sure the receiving device is set up to receive data using its IR port and select Via infrared.

OR

To send the business card as a message, select Via text message.

If you are sending the business card using IR, the phone makes the IR connection and sends the business card. If you are sending the business card as a text message, continue to the next step.

3

Enter the number for your recipient or select Find to retrieve a number from contacts.

4

Select OK.

The business card is sent.

• 1

-

TOUCH DIALING

You can associate any entry in contacts with a key from 2–9, and dial those entries by pressing and holding the assigned key.

Assign a key

1

At the start screen, select Contacts > 1-touch dialing.

2

Scroll to any empty slot and select Assign.

3

Enter the number (including the area code) and select OK, or select Find to retrieve a number from contacts.

4


If 1-touch dialing is off, the phone displays a prompt asking if you would like to turn 1-touch dialing on.

5

Select Yes to activate 1-touch dialing.

The entry appears in the slot you have assigned.

Make a call

Press and hold the key to which an entry has been assigned. Your phone dials the entry assigned to the key.

Change numbers

1


2

Scroll to the 1-touch dialing entry you wish to change and select Options >

Change.

3

Enter the new number, or select Find to retrieve a number from contacts, and select OK.

4

Enter a name for the entry and select OK.



Contacts (Menu 3)

Delete numbers

1


2

Scroll to the 1-touch dialing location you wish to delete and select

Options > Delete.

You are asked to confirm the deletion.

3

Select OK to delete the key assignment.

• INFO, SERVICE, AND OWN NUMBERS

Your service provider may have saved the operating number of your phone, as well as various information and service numbers to your SIM card.

Note: This feature may not be supported by your SIM card. Contact your service provider for more information.

1

At the start screen, select Contacts and one of the following number types:

Info numbers—Contact your service provider to obtain information.

Service numbers—Contact your service provider to obtain service.

Own numbers—Display the operating number, or numbers which have been assigned to your phone by your service provider.

2

To view details of any of the number types in the previous table, select View when the number type appears in the display.

• CALLER GROUPS

You can add contacts entries to any of five caller groups, and then assign a unique ringing tone or graphic to that group. This enables you to identify callers from the group by their unique ringing tone or graphic. A caller group can be as small as one person or as large as the contacts list. You can rename caller groups to suit your preference.

Set caller group options

1

At the start screen, select Contacts > Caller groups > Family, VIP, Friends,

Business, or Other.

2

Select one of the following caller group options:

Rename group—Rename the group to your preference.

Group ringing tone—Set the ringing tone for the group.

Group logo—View the graphic for the caller group, and turn it on or off.

Group members—Add or remove members from the caller group.

3

Follow the prompts to set the option according to your preference.


55



Add a contact to a caller group

1

Recall a name you want to add to a caller group and select Details > Options >

Caller groups.

2

Select the caller group to which you want to add the name.

A confirmation message appears in the display.

• SELECT CONTACTS VIEW AND MEMORY

At the start screen, select Contacts > Settings and one of the following:

Memory in use—Select the memory you wish to use. Options are Phone, SIM card, or Phone and SIM combined. With Phone and SIM selected, names and numbers are saved to phone memory but entries saved to both memories appear in the display.

Contacts view—Select the Name list, Name and number, Name only, or Name

and image view.

Memory status—View the amount of phone or SIM memory used and available.



Settings (Menu 4)

10 Settings (Menu 4)

Use this menu to set or change your personal shortcuts, time and date settings, call settings, phone settings, display settings, tone settings, enhancement settings, security settings, and to restore factory settings.

• OVER THE AIR (OTA) SETTINGS SERVICE

To use browsers, MMS, GPRS, and other wireless services, you must have the proper settings on your phone. If you receive the settings directly as an OTA message, then you need only to save the settings on your phone. For more information about the availability of the settings, contact your service provider or nearest authorized

Nokia dealer.

• PROFILES

Profiles define how your phone reacts when you receive a call or a message, how your keypad sounds when you press a key, and more. Ringing options, keypad tones, and other settings for each of the five available profiles can be left at their default setting, or customized to suit your needs. Select and customize the most suitable profile for your situation, such as when you are in a meeting or outdoors. The profiles available are Normal, Silent, Meeting, Outdoor, and Pager.

Note: Profiles are also available for enhancements such as a headset and car kit. See “Enhancement settings” on page 70 for more information about enhancement profiles.

Select a profile

1

At the start screen, briefly press the Power key.

2

Select a profile from the list.

Customize a profile

You can customize any of the profiles a variety of ways.

1

From the menus, select Settings > Profiles.

2

Select the profile you want to customize, select Customize and one of the following:

Ringing options—Select the ringing tone style.

Ringing tone—Select the ringing tone for incoming calls.

Ringing volume—Set the volume of your ringing tone.

Vibrating alert—Turn the vibrating alert on or off.

Light alert—Set the phone to flash its backlights when you receive a call.


57



Message alert tone—Select the tone for received messages.

Keypad tones—Set the volume of your keypad tones (or turn them off).

Warning tones—Turn warning and confirmation tones on or off.

Alert for—Define which caller groups the selected profile will accept or decline.

See “Caller groups” on page 55 for more information.

Profile name—Rename the profile (up to 16 characters). You cannot rename the Normal profile.

Set a timed profile

Timed profiles can be used to prevent missed calls. For example, suppose you attend an event that requires your phone be set to Silent before the event starts, but you forget to return it to Normal until long after the event. During this time, you have missed several calls because the ringing tone was silent. A timed profile can prevent this by automatically returning your phone to the default profile at a time you specify.

Note: Timed profiles can be set up to 24 hours in advance.

1

From the menus, select Settings > Profiles.

2

Select a profile and Timed.

3

Enter the time for the profile to expire and select OK.

The profile you have set for expiration is now active and appears in the start screen along with a small clock icon.

• TONE SETTINGS

You can adjust the ringing volume, keypad tones, and more for the active profile.

See “Customize a profile” on page 57.

• DISPLAY SETTINGS

Wallpaper

You can set your phone to display a background picture (wallpaper) on the start screen. Some pictures are presaved in the Gallery menu. You can also take pictures with the built-in camera, receive pictures using multimedia messaging, download them from browser pages or transfer them with PC Suite from your PC and then save them in the Gallery. Your phone supports JPEG, GIF, BMP, PNG, and WBMP formats.

SELECT

1

From the menus, select Settings > Display settings > Wallpaper >

Select wallpaper.



Settings (Menu 4)

2

Scroll to a folder that contains graphics or images and select Open.

3

Scroll to the image of your choice and select Options > Set as wallpaper.

4

If Replace current wallpaper? appears in the display, select OK.


ACTIVATE OR DEACTIVATE

1

From the menus, select Settings > Display settings > Wallpaper.

2

Select On to activate or Off to deactivate.

Select color scheme

You can change the color of some display components in your phone, such as indicators and signal bars.

1

From the menus, select Settings > Display settings > Color Schemes.

2

Select the color scheme of your choice.


Show or hide operator logo

This is a Network Service. If supported by your service provider, you can choose whether the display shows the operator logo when the phone is in the standby mode.

1

From the menus, select Settings > Display settings > Operator logo.

2

Select On to show the logo, or Off to hide the logo.


Set screen saver timeout

The screen saver is activated when no function of the phone is used after a preset period of time. Press any key to deactivate the screen saver. The screen saver is also deactivated when the phone is out of the network coverage area.

You can set your phone to display a screen saver after a preset time or after a custom time (up to 60 minutes) of your choosing.

1

From the menus, select Settings > Display settings > Screen saver timeout.

2

Select 2 minutes or 5 minutes.

OR

If you want to set a custom time (up to 60 minutes), select Other, then enter the custom time and select OK.



59



Change display brightness

You can change the brightness of the display.

1

From the menus, select Settings > Display settings > Display brightness.

After a brief pause, a bar chart appears in the display indicating the current brightness level.

2

Use the Scroll left and Scroll right keys to adjust the contrast level to your preference.

3

Select OK to accept your settings.

Select menu view

You can select either the List interface or the Grid interface.

From the menus, select Settings > Display settings > Menu view > List or Grid.

• TIME AND DATE SETTINGS

Show or hide the clock

You can display or not display the clock on the start screen.

From the menus, select Settings > Time and date settings > Clock > Hide clock or Show clock.

If the clock was previously hidden (not shown on the display), it will now appear in the upper right corner of the start screen.

If the clock was previously shown in the display, it will now be hidden from view.

Set the clock

1

From the menus, select Settings > Time and date settings > Clock >

Set the time.

2

Enter the time in hh:mm format, and select OK > am or pm.

Change the time format

You can set the time format for am/pm or 24-hour format (military time).

From the menus, select Settings > Time and date settings > Clock > Time

format > 24-hour or 12-hour.


Show or hide the date

You can display or not display the date on the start screen.

From the menus, select Settings > Time and date settings > Date > Hide date or Show date.



Settings (Menu 4)

If the date was previously hidden (not shown on the display), it will now appear in the center of the start screen.

If the date was previously shown in the display, it will now be hidden from view.

Set the date

1

From the menus, select Settings > Time and date settings > Date >

Set the date.

2

Enter the date and select OK.

The date is set.

Set or change the date format

1

From the menus, select Settings > Time and date settings > Date >

Date separator.

2

Select the separator of your choice (period, slash, or hyphen).


3

Select Date > Date format.

4

Select the format of your choice.


Automatic update of date and time

This is a Network Service. You can set the phone to update the date and time from the network when you turn the phone on. If the clock in your phone is 30 seconds or more off the network time, the phone will automatically update to reflect the network time.

From the menus, select Settings > Time and date settings > Auto-update of

date & time and one of the following:

On—Update the time automatically.

Confirm first—Request confirmation before updating the time. You can accept or decline the update.

Off—Do not automatically update the time.

• PERSONAL SHORTCUTS

You can change the function of the Right selection key so that your most frequently used functions can be quickly accessed from the start screen. This list of functions is called the Go to menu. You can also select an operator-specific name for the

Right selection key to be displayed in the start screen.


61



Choose functions for the Go to menu

1

From the menus, select Settings > Personal shortcuts > Select options.

A list of functions is displayed.

2

Scroll to the desired function from the list and select Mark.

A mark appears in the box next to the selected function indicating that you have selected the function. Select Unmark to remove a function from the list.

3

Repeat the previous step to select or remove as many functions as you wish.

4

Select Done when you have added all desired functions.

5

When Save changes? appears in the display, select Yes.

Organize functions

1

From the menus, select Settings > Personal shortcuts > Organize Go to options.

The list of functions is displayed.

2

Scroll to the function you wish to rearrange; then select Move.

3

Select Move up, Move down, Move to top, or Move to bottom from the list of choices.

The list of right selection key functions is displayed in the new order.

4

Select Done.

A confirmation message appears.

5

Select Yes.

The changes are saved.

Set the Right selection key

1

From the menus, select Settings > Personal shortcuts > Right selection key.

2

Select either an operator-specific name (if available) or one of the functions in the list.

The selected name or function will appear over the Right selection key in the start screen.

If you selected Go to, the Right selection key takes you to the list of functions you selected for the Go to menu. If you selected one of the other functions, the Right selection key takes you directly to that function. If you selected an operator-specific name, the Right selection key takes you to the operator’s

WAP site.



Settings (Menu 4)

• CONNECTIVITY

In this menu you can connect the phone to a compatible device using an IR connection. You can also define when the phone connects to the (E)GPRS network.

You can make a serial connection between your phone and a PC using the DKU-5 data cable, which is available for purchase as an enhancement. Once you establish this connection, you can access phone information from your PC. It may also be possible to make this same serial connection between your phone and an IR-equipped laptop or IR-equipped desktop PC using the IR port.

For more information, see the PC Suite 5.7 User Guide and PC Connectivity Guide.

The guide, Nokia PC Suite, and all related software can be downloaded from the

U.S. Mobile Phone products section of www.nokia.com.

Infrared

You can set up the phone to receive data through its IR port. To use an IR connection, transmission and reception must be to or from an infrared compatible phone or device.

You can send or receive data such as business cards and calendar notes to or from a compatible phone or data device (such as a computer) using the IR port of your phone.

Do not point the IR beam at anyone's eye or allow it to interfere with other IR devices.

This device is a Class 1 laser product.

SEND AND RECEIVE DATA

1

Ensure that the IR ports of the sending and receiving devices are pointing at each other and that there are no obstructions between the devices.

The preferable distance between the two devices in an IR connection is from

3 inches to 3 feet.

2

Activate IR in your phone by selecting Settings > Connectivity > Infrared from the menus.

3

The user of the other device should activate IR as well.

If data transfer is not started within two minutes after the activation of the IR port, the connection is cancelled and must be restarted.

During data transfer, the phone should be on a stationary surface and should not be moved.

CONNECTION INDICATOR

• When is shown continuously, the IR connection is activated and your phone is ready to send or receive data using its IR port.

• When blinks, your phone is trying to connect to the other device or a connection has been lost.


63



GPRS, EDGE, CSD

With your phone you can use general packet radio service (GPRS), and circuit switched data (CSD).

With GPRS, you can stay connected to the Internet and allow for faster downloads without completing a dial-up connection. Applications using GPRS include the browser, and text messaging.

Enhanced GPRS (EGPRS), also known as EDGE (enhanced data rates for GSM evolution) is similar to GPRS but the connection is up to 3 times as fast.

To use the EDGE service, subscribe to it from your service provider and save the GPRS settings for the functions that you want to use over the EDGE network. For information on pricing, availability, and data transfer speed, contact your service provider.

When you have selected GPRS as a data bearer, the phone uses EDGE instead of

GPRS if this is available in the network. You cannot choose between EDGE and

GPRS, but for some applications, such as browsing WAP or XHTML pages, you may be able to select either GPRS or CSD.

DEFINE GPRS CONNECTION

Depending on your service, you may be able to define when the phone connects to the GPRS or EDGE network.

From the menus, select Settings > Connectivity > GPRS > GPRS Connection and one of the following:

When needed—The phone registers and connects to the GPRS or EDGE network only if you use a function that needs the GPRS service. Establishing a connection may take longer than when Always online is selected.

Always online—The phone automatically registers to a GPRS or EDGE network when you switch the phone on, if the network is available in your location.

GPRS ICONS

The following icons appear in the upper left corner of the screen to show you the status of your GPRS connection.

Indicates that the GPRS connection mode is Always online and the

GPRS service is available.

Indicates that the GPRS connection has been interrupted by a voice call or text message. The phone tries to reestablish the connection after the call.

Indicates an active GPRS connection, for example, when you are using the browser.



Settings (Menu 4)

Data communication applications

For information on using a data communication application, refer to the documentation provided with the application.

If you use an IR connection, activate the IR connection in your phone by selecting

Settings > Connectivity > Infrared from the menus. Also, make sure that the connection is active in your PC.

For better performance during data calls using an IR connection, place the phone on a stationary surface. Do not move the phone during a data call.

If you use the DKU-5 data cable:

1

Connect the cable to the USB port on your computer and to the connector on your phone.

2

Start using the data communications application on the computer.

Note: Making or answering phone calls during a computer connection is not recommended as it might disrupt the operation.

• CALL SETTINGS

Call forwarding

Call forwarding tells your network to redirect incoming calls to another number.

Call forwarding is a Network Service and may not work the same in all networks.

Contact your service provider for availability.

ACTIVATE CALL FORWARDING

1

From the menus, select Settings > Call settings > Call forwarding and one of the following:

Forward all voice calls—Forward all calls to the number you specify.

Forward if busy—Forward incoming calls when you are in a call.

Forward if not answered—Forward incoming calls to another number if you are unable to answer. You can also set a delay before forwarding takes place.

Forward if out of reach—Forward incoming calls when your phone is off.

Forward if not available—Forward calls that are not picked up. You can also set a delay before forwarding takes place.

Forward all fax calls—Forward all fax calls to a fax mailbox.

Forward all data calls—Forward all data calls to a data mailbox.

Cancel all call forwarding—Cancel any call forwarding options you may have set.

2

Select Activate.


65



3

Select the destination to which your calls will be forwarded.

4

Enter the number to which your calls, data, or other information will be forwarded and select OK.

5

Select the delay time.

Your phone calls the network to activate the feature you have requested. The network sends a confirmation note when the feature has been activated successfully.

CANCEL CALL FORWARDING

From the menus, select Settings > Call settings > Call forwarding > Cancel all

call forwarding.

Note: Cancel all call forwarding may affect your ability to receive voice mail messages. Contact your service provider for specific details.

Automatic volume control

Automatic volume control automatically adjusts the phone earpiece volume according to the noise level in your environment and the volume of the speaker on the other end of the call. For example, if you are in a noisy environment, the volume is increased. If the person you are speaking with is shouting loudly, the volume is decreased.

Automatic volume control is not available if you are using a headset or other accessory.

USING THE MENU

1

From the menus, select Settings > Call settings > Automatic volume control.

2

Select On to activate, or Off to deactivate. The default setting is Off.

DURING A CALL

Note: Setting automatic volume control during an active call affects only the current call.

1

During a call, select Options.

2

Select Auto volume on to activate, or Auto volume off to deactivate.

If you increase the volume during an active call by pressing the Right scroll key, the phone volume level increases regardless of whether or not automatic volume control is activated.

When you end the call, the volume returns to the level set before automatic volume control was activated.

Anykey answer

Anykey answer allows you to answer an incoming call by briefly pressing any key except the power key, the selection keys, and the End key.

From the menus, select Settings > Call settings > Anykey answer > On or Off.



Settings (Menu 4)

Automatic redial

Occasionally, your network may experience heavy traffic, resulting in a “fast” busy signal when you dial. With automatic redial activated, your phone redials the number up to 10 times, and notifies you once the network is available.

From the menus, select Settings > Call settings > Automatic redial > On or Off.

1

-

touch dialing

You can turn the 1-touch dialing feature on and off. For more information, see

“1-touch dialing” on page 54.

From the menus, select Settings > Call settings > 1-touch dialing > On or Off.

Call waiting

If supported by your service provider, call waiting notifies you of an incoming call even while you are in a call. You can then accept, reject, or ignore the incoming call.

ACTIVATE OR DEACTIVATE CALL WAITING

From the menus, select Settings > Call settings > Call waiting > Activate or Cancel.

USE CALL WAITING

1

During a call, press the Talk key to answer the waiting call.

The first call is put on hold.

2

Press the End key to end the active call.

Summary after call

You can display the time spent on a call when you hang up.

From the menus, select Settings > Call settings > Summary after call > On or Off.

Send my caller identity

You can prevent your number from being displayed on the receiving party’s caller

ID. This feature is network-dependent and works on a call-by-call basis. Contact your service provider for more information.

From the menus, select Settings > Call settings > Send my caller ID > Set by

network, Yes, or No.


Select a line for outgoing calls

Note: This is a network-dependent feature. Check with your service provider for availability and a description of the feature.

1

From the menus, select Settings > Call settings > Line for outgoing calls.


67



Note: If you select Line 2 but have not subscribed to this network service, you will not be able to place calls. However, calls on both lines can be answered regardless of the selected line.

2

Select either Line 1 or Line 2.


Note: If supported by your SIM card, you can prevent the line selection by using the Lock option.

• PHONE SETTINGS

Set the display language

1

From the menus, select Settings > Phone settings > Phone language.

2

Select the language of your choice.

Phone memory

1

From the menus, select Settings > Phone settings > Memory status.

After a brief pause, Free memory, Used memory, Contacts, Text messages,

Multimedia msgs., Gallery, Organizer, and Applications appear in the display.

2

Scroll through the list to view the memory associated with each item.

Note: For more information, see “Shared memory” on page 3.

Activate or deactivate automatic Keyguard

When the Keyguard is on, calls still may be possible to the official emergency number programmed into your phone. Enter the emergency number and press the Send key.

You can set the keypad of your phone to lock automatically after a preset time delay (from 10 seconds to 60 minutes). When the preset delay expires, the keypad locks automatically.

1

From the menus, select Settings > Phone settings > Automatic keyguard >

On or Off.

2

If you selected On, Set delay appears in the display.

3

Enter the delay (in mm:ss format) and select OK.

Activate or deactivate cell info display

Note: Cell info display is network-dependent and may not work the same in all networks. Contact your service provider for availability.



Settings (Menu 4)

When this function is selected, your phone will indicate when it is used in a system cell based on Micro Cellular Network technology. MCN technology increases the capacity of wireless networks in urban areas. The setting will remain in effect even if the SIM card is changed or the phone is switched off.

From the menus, select Settings > Phone settings > Cell info display > On or Off.


Note: If the GPRS connection is set to Always online, info messages may not be received. In that case, set the GPRS connection to When needed, see “GPRS, EDGE, CSD” on page 64 for more information.

Write a welcome note

You can write a welcome note which shows up briefly on your display whenever you power up your phone.

Predictive text input cannot be used for entering welcome note text.

1

From the menus, select Settings > Phone settings > Welcome note.

2

Enter a note (up to 44 characters).

Press the * key to display and select from available special characters. For more information on special characters, see “Punctuation and special characters” on page 22.

3

When you are finished, select Options > Save.

Set up network selection

You may be able to manually search for another network which has a roaming agreement with your home service provider.

From the menus, select Settings > Phone settings > Network selection and one of the following:

Automatic—Your phone defaults to those settings which have been preset by your service provider.

Manual—Your phone searches for a network which has a roaming agreement with your service provider.

Note: If No system access appears in the display, you will need to switch to Automatic mode, or insert another SIM card into the phone.

Confirm SIM service actions

This option allows you to request notification when your service provider makes changes to SIM-related services (such as activating GPRS service). This is a Network

Service and may not appear on your phone, depending on your service provider.


69



1

From the menus, select Settings > Phone settings > Confirm SIM

service actions.

2

Select Yes to request notification, or No to prevent notification.


Activate or deactivate help text

Your phone displays brief descriptions for most menu items. When you arrive at a feature or menu, pause for about 15 seconds. Use the scroll keys to page through the full help text, if necessary.

The default setting for Help text is On. However, you can turn help text on or off by doing the following from the start screen.

From the menus, select Settings > Phone settings > Help text activation > On or Off.


Activate or deactivate start

-

up tone

You can set your phone to play (or not to play) a start-up tone when the phone is switched on.

From the menus, select Settings > Phone settings > Start-up tone > On or Off.


• ENHANCEMENT SETTINGS

The Enhancement settings menu is shown only if the phone is or has been connected to one of the compatible enhancements such as the headset or music stand.

Each compatible enhancement appears in the Enhancement settings menu only after it has been connected to the phone. Once an enhancement has been connected, it always appears in the menu even if it is not currently connected.

1

From the menus, select Settings > Enhancement settings > Headset,

Handsfree, Loopset, TTY, or Music stand.

A list of options appears in the display.

2

Select the option of your choice and follow the prompts.

Headset options

Default profile—Choose the profile you wish to be automatically activated when a headset is connected.

Automatic answer—Calls are answered automatically after one ring when a headset is connected. Select On or Off.



Settings (Menu 4)

Handsfree options

Handsfree options are available when the phone is connected to a car kit.

Default profile—Choose the profile you wish to use when your phone is connected to a car kit.

Automatic answer—Calls are answered automatically after one ring when a car kit is connected. Select On or Off.

Lights—Choose to keep the phone lights always on, or to shut off automatically after several seconds. Select On or Automatic.

Ignition sense—When the phone is connected to the full car kit, prevents the phone from draining the car battery when the car ignition is off. Select Ignition on to automatically switch off the phone approximately 20 seconds after the car ignition is turned off. Select Ignition off to leave the phone on when the car ignition is turned off.

Loopset options

Use loopset—Enable use of the LPS-4 mobile inductive loopset. Select Yes or No.

Default profile—Choose the profile you wish to be automatically activated when a loopset is connected.

Automatic answer—Calls are answered automatically after one ring when a loopset is connected. Select On or Off.

TTY options

Use TTY—Activates the TTY feature. Select Yes to activate TTY or No to deactivate.

Music stand options

Default profile—Choose the profile you wish to be automatically activated when your phone is connected to the music stand.

Automatic answer—Calls are answered automatically after one ring when the phone is connected. Select On or Off.

Lights—Choose to keep the phone lights always on, or to shut off automatically after several seconds. Select On or Automatic.

• SECURITY SETTINGS

For information about security features, see “Phone security” on page 23.


71



• RESTORE FACTORY SETTINGS

You can reset some of the menu settings to their original values.

1

From the menus, select Settings > Restore factory settings.

2

Enter the security code (the default is 12345) and select OK.

A message appears in the display confirming that original settings have been restored.

Note: Data that you have entered or downloaded is not deleted. For example, names and numbers in contacts are not affected.



Gallery (Menu 5)

11 Gallery (Menu 5)

You can save pictures and ringing tones to folders in the gallery, or create folders of your own and save them there. You can download images and tones using MMS, web sites, or Nokia PC Suite.

Your phone supports usage rights to protect content that you have acquired. A piece of content, such as a ringing tone, can be protected and associated with certain usage rules, for example the number of usage times. The rules are defined in the content’s usage rights that can be delivered with the content or separately, depending on the service provider. You may be able to update these rights. Always check the delivery terms of any content and usage rights before acquiring them, as they may be subject to a fee.

• FOLDERS

At the start screen, select Menu 5 (Gallery) and one of the following:

View folders—Display the folders in the gallery menu.

Add folder—Create a new folder.

Delete folder—Delete a folder you have created. The preset folders cannot be deleted.

Rename folder—Rename a folder you have created. The preset folders cannot be renamed.

Usage rights list—View the available usage rights.

Gallery downloads—Download more images and tones. Select Graphic downloads or Tone downloads, then select a site. Selecting More bookmarks displays the list of bookmarks in the Services menu.

When you select Gallery downloads, the phone tries to connect to the Internet using your browser and the currently active set of gallery downloads. If the connection fails, you may need to activate another set or change the current settings. See “Set up for browsing” on page 92 for more information.

• FOLDER ITEMS

1

From the menus, select Gallery > View folders.

A list of folders appears in the display.

2

Scroll to a folder and select Open.

A list of images or tones appears in the display.

3

Scroll to an image or tone, and select Options.

Depending on the type of file, some of the following options appear:


73



Play—Play a multimedia file.

Pause—Pause a multimedia file that is playing.

Open—Open the selected file.

Delete—Delete the selected file.

Send—Send the selected file.

Note: The Send option may not be available if the selected file (either image or sound) is copyrighted.

Edit image—Start the image editor.

Move—Move the file to another folder.

Rename—Rename the selected file.

Mute audio—Mute a sound file.

Unmute audio—Unmute a muted sound file.

Set contrast—Adjust the contrast in the image.

Set as wallpaper—Set the image as wallpaper.

Set as ring tone—Use the tone as the ringing tone in the current profile.

Details—View details of the file, such as the name, time and date the file was created.

Sort—Sort the files according to name, date, format, or size.

View in sequence—View all of the images in the folder sequentially as a slide show, or listen to each of the tones in sequence.

Update rights—Update the usage rights of the selected file if it has valid usage rights. This option is only shown if the file supports rights updating.


• EDIT AN IMAGE

1

From the menus, select Gallery > View folders.

2

Select a folder that contains images and select Open.

3

Scroll to an image and select Options > Edit image > Options.

Options include Save, Insert text, Insert frame, Insert clip-art, and Crop image.

To insert text in the center of the image:

1

Select Insert text.

2

Enter text in the text editor and select OK.

3

To change the appearance of the inserted text, select Options > Font style,

Font size, Font color, or Rotate, and follow the prompts.



Gallery (Menu 5)

4

When you are satisfied with the appearance of the inserted text, select

Options > OK.

To put a frame around the image:

1

Select Insert frame.

2

Scroll to one of the frame images in the Graphics folder and select


3

When the image is displayed with the frame added, select OK.

To insert clip art in the center of the image:

1

Select Insert clip-art.

2

Scroll to one of the clip art images in the Graphics folder and select


The image is displayed with the clip art added.

3

Use the scroll keys to move the clip art up, down, left, and right on the image.

4

To change the size and shape of the clip art, select Options > Rescale and use the scroll keys to move the bottom and right borders of the clip art.

5

When you are satisfied with the size and position of the clip art, select

Options > OK.

To crop the image:

1

Select Crop image > Portrait size or adjustable size.

The image appears with a marking box to indicate the part of the image that is being cropped.

2

Use the scroll keys to move the marking box up, down, left, and right on the image.

3

To change the size of the marking box, select Options > Rescale and use the scroll keys to move the bottom and right borders of the box.

4

To change the position of the marking box, select Options > Move and use the scroll keys to move the box.

5

To toggle between Rescale mode and Move mode, press the # key.

6

When you are satisfied with the size and position of the marking box, select

Options > OK.

7

The portion of the image inside of the marking box appears in the display.

To save the edited image:

1

Select Options > Save.

2

Enter a name for the image and select OK.

3

Select the folder where you want to save the image.


75



12 Media (Menu 6)

In this menu you can use the built-in camera, FM radio, and voice recorder.

• CAMERA

You can take photos with the built-in camera and adjust its settings. The camera lens is on the back of the phone, and the color display of the phone works as a viewfinder. The camera produces JPEG images. The camera self-timer has a

10-second delay. After you have taken a picture, you can attach it to a multimedia message and send it with MMS, save it as wallpaper in the standby mode, save it in a compatible PC using Nokia PC Suite software, and upload it to a web address with the content image uploader. When you attach a picture to an entry in your list of contacts, the picture is displayed when your contact calls you.

If there is not enough memory to take a new photo, you need to free some by deleting old photos or other files in the gallery.

When using the features in this device, obey all laws and respect privacy and legitimate rights of others.

Take a photo

1

From the menus, select Media > Camera and one of the following:

Standard photo—Lets you take a photo in landscape orientation under normal lighting conditions.

Portrait photo—Lets you take a photo in portrait orientation that can be added to a name/phone number saved in contacts.

Night mode—Lets you take a photo in landscape orientation in dim lighting.

2

The live image appears on the display, and you can use the display as a viewfinder.

3

To take a photo, select Capture.

When taking a photo, a shutter sound is heard. The phone saves the photo in the

Images folder of the Gallery menu. The saved photo is shown on the display.

4

Select Back to take another photo.

OR

Select Options and one of the following:

Zoom—Display a zoomed-in version of the photo.

Delete—Delete the selected photo.



Media (Menu 6)

Send—Send the selected photo in a multimedia message or by IR.

Attach to contact—Attach the selected photo to a name and number in contacts. When the phone receives a call from that contact, the photo appears on the display screen. The photo must be in portrait mode.

Rename—Rename the selected photo.

Open Gallery—Display the Photos folder in the Gallery.

Change mode—Select either Standard photo, Portrait photo, or Night mode.

Set contrast—Increase or decrease contrast of the selected photo using the

Scroll right and Scroll left keys.

Set as wallpaper—Set the photo as wallpaper.

Details—View details of the photo, such as the name, time and date the photo was taken.

Note: When a photo is zoomed, the photo is not stored permanently in the zoomed size. You cannot edit or send a zoomed photo. Select Back to display the image in normal size.

Self

timer

From the menus, select Media > Camera > Self-timer > Standard photo,

Portrait photo, or Night mode > Start.

After the timeout, the camera takes the photo and saves it in the Gallery menu.

While the self-timer is running, a beeping sound is heard.

Settings

You can select the level of image quality, turn camera sounds on and off, and define a default title to be used when you save a photo.

From the menus, select Media > Camera > Settings and one of the following:

Image quality—Define file compression when saving the image. Select High,

Normal, or Basic. High has the least file compression and provides the best image quality, but takes more memory.

Camera sounds—Set the shutter sound and the self timer tone to On or Off.

Default title—Define the title that will be used when saving a photo. If you select

Automatic, the default title will be used, or if you select My title, you can enter or edit a new title.


77



• RADIO

Your phone has an FM radio that also functions as an alarm clock radio. You can listen to the FM radio on your phone through the handsfree speaker or with a headset. For FM stereo, connect a DT-1 music stand or HDS-3 stereo headset to the connector on the bottom of the phone.

The FM radio uses the wire of the headset as an antenna. A compatible headset needs to be attached to the device for the FM radio to function properly.

The quality of a radio broadcast depends on coverage of the radio station in that particular area.

Note: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing.

Turn the radio on and off

1

Attach an audio enhancement to the phone.

2

From the menus, select Media > Radio.

3

To turn off the radio, press and hold the End key.

Use the radio

Note: When you place or receive a call, the radio automatically mutes.

Once the call is ended, the radio switches back on.

With the radio on, select Options and one of the following:

Turn off—Turn off the radio.

Save channel—Save the current station to one of 20 locations.

Automatic tuning—Briefly press a scroll key to start the channel search up or down. Select OK when a channel is found.

Manual tuning—Press the Scroll up key or the Scroll down key to search in increments of 0.5 MHz. Select OK when a channel is found.

Set frequency—Use the keypad to enter the frequency of a known radio station.

Delete channel—Delete a saved channel.

Rename—Enter a new name for the saved channel and select OK.

Loudspeaker—Listen to the radio through the speakerphone.

Headset—Listen to the radio through the headset.

Mono output/Stereo output—Listen to the radio in monaural mode (default) or in stereo. Stereo output is available through a stereo enhancement.



Media (Menu 6)

To set the radio frequency, press the * key and use the keypad to enter the frequency of a known radio station. To tune the radio manually, press the # key; then press the

Scroll up key or the Scroll down key to search in increments of 0.5 MHz.

To adjust the volume, press the Scroll right key (louder) and the Scroll left key (softer).

Note: When an application using a GPRS connection is sending or receiving data, it may interfere with the radio.

Save a radio channel

You can save a preset station to any one of 20 locations in memory, and then tune to that station by pressing the Scroll up key or the Scroll down key with the radio on.

1

With the radio on, press and hold the Scroll up key or the Scroll down key to start the channel search.

Searching stops when a channel is found.

2

To save the channel, select Options > Save channel.

3

Enter a name for the channel and select OK.

4

Select an (empty) location to save the channel.

To save an FM station quickly to 1–9 memory locations, press and hold the corresponding number key while the radio is playing. Then, enter the name of the channel and select OK.

• VOICE RECORDER

You can make a short (up to one minute) recording and save it to the Recordings folder in the Gallery. You can also record your phone calls.

Make a recording

1

From the menus, select Media > Voice recorder.

2

To start the recording, select Record.

3

Hold the phone in the normal position near your ear and record your message.

4

To stop the recording, select Stop.

The recording is saved in the Recordings folder of the Gallery.

5

To replay the latest recording, select Replay last.

6

To send the latest recording as a multimedia message or by IR to a compatible phone, select Send.


79



Record a phone call

During a call, select Options > Record. To stop recording, select Stop.

The recording is saved in the Recordings folder of the Gallery.

Manage recordings

1

From the menus, select Media > Voice recorder > Recordings list.

2

Scroll to the Recordings folder and select Open.

3

Scroll to the desired recording and select Options and one of the following:

Open—Listen to the recording.

Delete—Delete the recording.

Rename—Enter a new name for the recording.

Set as ring tone—Use the recording as the phone ringing tone.

Details—View the name, size, date, time, length, format, and copyright status of the recording.

Sort—Sort the recordings in the folder by name, date, format, or size.



Organizer (Menu 7)

13 Organizer (Menu 7)

Your phone has many useful features for organizing your everyday life, including an alarm clock, a calendar, and a calculator.

• ALARM CLOCK

The alarm clock is based on the internal clock of your phone. It sounds an alert or turns on the built-in FM radio at the time you specify. The alarm works even if the phone is off, as long as there is enough power in the battery. When the alarm is triggered, the clock radio alarm stays on until the radio is turned off.

Select an alarm tone

From the menus, select Organizer > Alarm clock > Alarm tone and one of the following:

Standard—Select the default alarm tone.

Radio—Use the radio as an alarm. If you select this option, connect the headset to the phone. The phone uses the last channel you listened to as an alarm tone. If the headset is not connected, the default alarm tone is used.

Ringing tone—Select an alarm tone from the ringing tone list.

Open Gallery—Select a sound clip from a Gallery folder to use as an alarm. Open a folder that contains tones, scroll to the tone you want, and select Options > Select.

Set an alarm

NOT ALREADY SET

1

From the menus, select Organizer > Alarm clock > Alarm time.

2

Enter the time for the alarm in hh:mm format, and select OK > am or pm.

Alarm on appears briefly in the display and appears on the start screen.

ALREADY SET

1

From the menus, select Organizer > Alarm clock > Alarm time > On.

2

Enter the time for the alarm in hh:mm format, and select OK > am or pm.

Alarm on appears briefly in the display and appears on the start screen.

Turn off an alarm setting

From the menus, select Organizer > Alarm clock > Alarm time > Off.

Alarm off appears briefly in the display.


81



When the alarm sounds

Your phone beeps, vibrates, and the display lights up. Stop and Snooze appear in the bottom of the display.

WITH THE PHONE ON

Select Stop to shut the alarm off.

OR

Select Snooze. The alarm stops for 10 minutes and Snoozing appears in the display.

If you do not press a key, the alarms stops (snoozes) for 10 minutes, and then sounds again.

WITH THE PHONE OFF

If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger.

• CALENDAR

The calendar keeps track of reminders, calls you need to make, meetings, and birthdays. It can even sound an alarm for any of these events.

Open the Calendar

From the menus, select Organizer > Calendar.

OR

Press the Right selection key at the start screen.

After a brief pause, the month view of the calendar appears in the display with the current date highlighted. You can move to another date by using the four-way scroll keys like a joystick.

Month view

The month view provides an overview of the selected month and weeks. It also allows you to jump to a specific date. Any days or dates that appear in bold font contain calendar notes such as a meeting or reminder.

Month view




Week view

The Week view displays one week at a time, with each day divided into one-hour blocks.

In the month view, select Options > Week view.

To return to the month view, select Back.

Week view

Calendar options

In either calendar view, select Options to display the following options:

View day—View calendar notes for the selected day.

Week view—Go to the week view (available only in month view).

Make a note—Enter a note for the selected day or time.

Go to date—Jump to another date.

Settings—Set the date and time, date and time format, the day each week starts, and whether you want your notes to autodelete after a specified time.

Go to a date

1

In either calendar view, select Options > Go to date.

2

Enter the date (for example, 12/15/2003) and select OK.

The calendar appears in the display with the jump date highlighted.

Make a calendar note

You can choose from five types of notes: Meeting, Call, Birthday, Memo, and

Reminder. Your phone asks for further information depending on which note you choose. You also have the option to set an alarm for any note that you select.

1

Go to the date for which you want to set a reminder.

See “Go to a date” on page 83 for more information.

2

From the monthly view with the go to date highlighted, select Options >

Make a note and one of the following:

Meeting prompts you to enter a subject, location, and then a start/ end time. You are then given the option to set an alarm.

Call prompts you to enter a phone number, a name, and the time. You are then given the option to set an alarm.

Birthday prompts you to enter the person’s name, and year of birth.

You are then given the option to set an alarm.


83



Memo prompts you to enter a subject and then a start date and end date. You are then given the option to set an alarm.

Reminder prompts you to enter the subject you wish to be reminded about. You are then given the option to set an alarm.

3

Enter the note and select Options > Save.

4

Enter the information requested by the prompts.

View calendar notes

After you have created some calendar notes, you can view them as follows:

1


After a brief pause, the monthly view appears in the display with the current date highlighted. Any dates that contain calendar notes are in bold.

2

Use four-way scrolling to go to the date containing the note.

3

Select Options > View day.

Any notes you have for the day appear in a list format.

4

Scroll to the desired note and select Options > View.

The body of the note appears in the display.

Options while viewing calendar notes

Select Options while viewing a day’s notes to display and the following options appear:

View—View the full note (available only in header view).

Make a note—Make another note for the selected date (available only in header view).

Delete—Delete the note.

Edit—Edit the note.

Move—Move the note to another date on your calendar.

Repeat—Make the note recur on a regular basis (daily, weekly, biweekly, monthly, and yearly).

Go to date—Jump to another date on your calendar (available only in header view).

Send note—Send the note to another device using Infrared or as a text message or in vCal format.

Copy—Copy the note. You can then paste the note to another date.

Settings—Set the date and time, date and time format, the day each week starts, and whether you want your notes to autodelete after a specified time.




Send a calendar note to another device

1


After a brief pause, the monthly view appears in the display. Days containing notes are in bold font.

2

Jump or scroll to the date containing the note you wish to send.

3

Select Options > View day.

4

Scroll to the note you wish to send and select Options > Send note > Via

Infrared, Via calendar, or Via text message.

5

If you select Via Infrared, align the IR ports of both devices and select Select.

Ensure the other device is set to receive data using IR. For more information on enabling IR in the receiving device, refer to the user guide for the receiving device.

The note is sent.

6

If you select Via calendar, enter the number for the recipient (or select Find to retrieve a number from contacts) and select OK.

The note is sent.

7

If you select Via text message, the note appears in the display.

8

Select Options > Send.

9

Enter the number for the recipient, or select Find to retrieve a number from contacts, and select OK.

The note is sent.

Receive calendar notes from another device

When you receive a calendar note, your phone displays Calendar note received.

You can then save the note in your calendar and set an alarm for any date and time.

VIEW RECEIVED CALENDAR NOTES

1

When your phone displays Calendar note received, select Show.

The text of your note appears in the display.

2

Press the scroll keys to view the entire message, if necessary.

SAVE RECEIVED CALENDAR NOTES

After viewing the Calendar note, select Options > Save.

DISCARD VIEWED CALENDAR NOTES

After viewing the Calendar note, select Options > Discard.


85



• CALCULATOR

Basic calculations

The calculator in your phone adds, subtracts, multiplies, divides, counts the square and the square root, and converts currency values.

Note: This calculator has limited accuracy and is designed for simple calculations.

1

From the menus, select Organizer > Calculator.

2

In the calculator screen, enter the first number in the calculation.

Press the # key for a decimal point if necessary.

3

To perform an arithmetic calculation, press the * key to cycle through the add

(+), subtract (-), multiply (

*

), and divide (/) characters, and pause briefly to select the displayed character.

OR

To perform a square or square root calculation, select Options > Square or

Square root.

4

For an arithmetic calculation, enter the second number in your calculation, then select Options > Equals.

The sum of your calculation appears in the display.

Currency conversion

You can convert foreign currency to domestic, or vice versa directly from the start screen.

1

At the start screen, enter a currency amount to convert.

2

Select Options and one of the following:

To home—Converts foreign currency to domestic currency.

To foreign—Converts domestic currency to foreign currency.

If you have not done so already, you are prompted to enter the exchange rate.

3

Enter the exchange rate, using the # key to insert a decimal if needed, and select OK.

The converted amount appears in the display.




Edit the exchange rate

1

From the menus, select Organizer > Calculator > Options > Exchange rate and one of the following:

Foreign units in home units—Enter the number of home units it takes to make one unit of foreign currency.

Home units in foreign units—Enter the number of foreign units it takes to make one unit of your home currency.

2

Enter the exchange rate and select OK.

The exchange rate is saved.


87



14 Applications (Menu 8)

Your phone supports J2ME Java applications. You will find some

Java applications and games pre-installed on your phone. Also, you can manage and download new applications and games from your service provider.

Running some applications and games may consume the battery faster and you may need to connect the phone to the charger.

• GAMES

Challenge yourself or a friend to one of the fun games in your phone!

From the menus, select Applications > Games and one of the following:

Select game—Select a game or enter a game option list. See “Game options” on page 88 for more info on game options.

Game downloads—Connect to game downloads on the mobile Internet using your browser.

Memory—Check the available memory for games and game related applications.

Settings—Turn game sounds, lights, and shakes on or off.

Launch a game

1

From the menus, select Applications > Games > Select game.

2

Scroll to a game and press the Talk key.

OR

Select Options > Open.

If the selection is a single game it will launch. Otherwise, a list of games within the selected game set appears in the display.

3

To launch a single game, scroll to the desired game and press the Talk key.

OR


If a game uses the whole display area, selection keys such as Options or Back will not appear in the display. Press the Left selection key or the Right selection key to show the options keys Select or Back (returns to the game).

Game options

While viewing the games list, select Options to display the following options. Scroll to an option and select Select to activate the option or enter its submenu.



Applications (Menu 8)

Open—Play the game.

Delete—Delete the game.

Web access—Choose an option for restricting network access. Options are Ask

first, Allowed, and Not allowed.

Update version—Check if a new version of the game is available for download.

Web page—Get more information or additional data from a mobile Internet page.

This feature is shown only if it is supported by the network and a mobile internet address has been provided by the game.

Connect via—Some applications need specific service settings. Your phone is set to use as default the service settings for the browser.

Details—Display details of the game.

Game downloads menu

From the menus, select Applications > Games > Game downloads and one of the options displayed.

After a brief pause, the phone connects to the web pages using the currently active set of browser settings.

If the connection fails, you may enter the Services menu and activate another set of service settings. See “Options while online” on page 97 for more info on browser settings.

When downloading a game, it may be saved in the Collections menu instead of the

Games menu.

Game memory

You can view the amount of memory available for games and applications.

From the menus, select Applications > Games > Memory.

Game settings

You can turn game sounds, lights, and vibration on or off.

From the menus, select Applications > Games > Settings > Games sounds, Game

lights, or Shakes > On or Off.

• COLLECTION

Launch an application

1

From the menus, select Applications > Collection > Select application.


89



2

Scroll to an application or an application set.

3

To launch the application, press the Talk key .

OR


An application may require a few seconds to load. When you open an application, wait for the launch screen to disappear. At that point, the application is ready.

Application options

Open—Open the selected application or application set.

Delete—Delete the application or application set from your phone. If you delete a pre-installed application, you will not be able to recover it.

Web access—Choose an option for restricting network access: Ask first (ask for net access), Allowed (allow net access), Not allowed (do not allow net access).

Update version—Check if a new version of the application is available for download.

Web page—Get further information or additional data for the application from a mobile Internet page. This feature must be supported by a service provider. It is only shown if a mobile Internet address has been provided with the application.

Connect via—Some applications need specific service settings. Your phone is set to use as default the service settings for the browser.

Details—Shows additional information about the application.

Download applications

Note: This feature is network-dependent. Contact your service provider for more information.

You can download new Java applications in different ways.

APPLICATION DOWNLOADS

1

From the menus, select Applications > Collection > App. downloads.

After a brief pause, the list of available browser bookmarks appears in the display.

2

Select More bookmarks to access the list of browser bookmarks in your

Services menu.

3

Select the bookmark that contains the application you wish to download.

After a brief pause, you are connected to the web page.

See “Navigate the mobile Internet” on page 93 for information on browsing web pages.

If the connection fails, you may enter the Services menu and activate another set of service settings. See “Options while online” on page 97 for more info on browser settings.



Applications (Menu 8)

DOWNLOAD LINKS

From the menus, select Services > Download links > App. downloads and one of the sites from the list.

Note: Only install sources that offer adequate protection against harmful software.

PC SUITE

Use the Java Application installer from PC Suite to download the applications in your phone.

Note: Only install sources that offer adequate protection against harmful software.

View memory status for applications

You can view the size of memory available for game and application installations.

From the menus, select Applications > Collection > Memory.


91



15 Services (Menu 9)

Your phone has a built-in browser you can use to connect to selected services on the mobile Internet. You can view weather reports, check news or flight times, view financial information, and much more. The multi-mode browser on your phone can display content that uses Wireless Mark-up Language (WML) or extensible Hypertext Mark-up Language (XHTML).

This feature is a Network Service. Contact your service provider for more information.

Because mobile Internet content is designed to be viewed from your phone, your service provider is now your mobile Internet service provider as well.

It is likely that your service provider has created a home page and set up your browser to go to this page when you log on to the mobile Internet. Once at your service provider’s home page, you may find links to a number of other sites.

• SET UP FOR BROWSING

It may not be necessary to manually configure the browser on your phone. Normally this is done by your service provider once you have subscribed to the feature. You may also receive the service settings as an over the air message from your service provider, or you may need to enter the service settings manually.

Contact your service provider if you have problems using the browser.

Save OTA service settings

To save the received settings, select Options > save.

OR

To discard the settings, select Options > discard.

Enter service settings manually

1

From the menus, select Services > Settings > Connection settings > Active

service settings.

2

Scroll to the desired connection set and select Activate > Edit active


3

Select each setting and enter the required information. Contact your service provider for details.



Services (Menu 9)

• SIGN ON TO THE MOBILE INTERNET

Activate service settings for the desired service

1

From the menus, select Services > Settings > Connections settings > Active


2

Scroll to the desired service and select Activate.

Connect to the service

Your service provider may have programmed the Right selection key to connect you directly to a web site, for example, the provider’s customer site. You can change this setting by reprogramming the Right selection key. See “Personal shortcuts” on page 61.

There are several ways to connect to a service:

• To open the service’s start page, from the menus, select Services > Home.

OR

At the start screen, press and hold the 0 key.

• To select a bookmark, select Services > Bookmarks and select a bookmark from the list.

If the bookmark does not work with the current active service settings, activate another set of service settings and try again.

• To enter the address of the service, select Services > Go to address. Enter the address of the service and select OK.

After a brief pause, the phone attempts to connect to your service provider’s home page.

If you see Check service settings, the phone may not be set up for browsing.

Contact your service provider to make sure that your phone is configured properly.

• NAVIGATE THE MOBILE INTERNET

Since your phone screen is much smaller than a computer screen, mobile Internet content is displayed differently from content displayed on a computer. This section contains guidelines for using phone keys to navigate a WAP site.

• To browse the WAP site, press the Scroll up key or the Scroll down key.

• To select a highlighted item, press the Talk key.

• To enter letters and numbers, press a key from 0–9.

• To enter special characters, press the * key.


93



• EXAMPLES OF MOBILE INTERNET SITES

The following illustrations show most of the elements you may find on a mobile

Internet site. These are examples only.

1) Header line

. Shows the current mobile Internet site.

2) Active link

. Appears as a highlighted word.

3) Inactive link

. Appears as an underlined word.

Scroll through the list of links using the Scroll up key and the Scroll down key.

1)

2)

3)

4) Selection list

. Brackets [ ] appear when you have the option to enter information.

5) Options

. Select Options to go to the site menu and/or browser page.

6) Back

. Select Back to return to the previous page.

4)

5)

7) Data entry field

. Brackets [ ] that enclose dots indicate when you need to enter information. In this example, you can enter your zip code to receive the local weather forecast.

7)

6)

• BOOKMARKS

Your device may have some bookmarks loaded for sites not affiliated with Nokia.

Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions for security or content as you would with any mobile Internet site.

You can save addresses for your favorite sites as bookmarks. You can add up to 50 bookmarks to your browser.

Enter bookmarks manually

1

From the menu, select Services > Bookmarks.

After a brief pause, a list of bookmarks (if any) appear in the display.

2

Select Options > New bookmark.



Services (Menu 9)

3

Enter an address for the bookmark and select OK.

4

Enter a title for the bookmark and select OK.

A message appears in the display confirming your bookmark is saved.

Set bookmarks while online

While you are connected to the site that you want to bookmark, select Options >

Add bookmark.

A message appears in the display confirming your bookmark is saved.

Receive a bookmark

1

When you receive a bookmark as an OTA message, select Options.

2

Select View to view the bookmark, Save to add it to the bookmark list, or

Discard to discard it.

• SERVICE INBOX

You can receive service messages (“pushed messages”) from your service provider.

Receive service messages

To set the phone to receive service messages

From the menus, select Services > Settings > Service inbox settings > Service

messages > On.

To set the phone to automatically fetch the content indicated in the service message:

From the menus, select Services > Settings > Service inbox settings >

Automatic conn. > On.

View a service message

When you receive a service message, a note appears in the display.

At the start screen, select Show to view the message immediately, or Exit to save it for later viewing.

OR

While browsing, select Options > Other options > Service inbox.

To view a saved service message:

1

From the menus, select Services > Service inbox.

2

Scroll to the desired message and select Options and one of the following:

Retrieve—Fetch the content indicated in the message.

Details—View the details of the message.

Delete—Delete the message.


95



• FILE UPLOAD

Depending on your service, you may be able to upload images and sound files from your phone to a web page. You must be connected to an XHTML page that contains embedded image upload tags. Follow the instructions on the display to upload files.

For more information, contact your service provider.

• DISCONNECT FROM THE MOBILE INTERNET

To close your connection, press the End key twice.

• SET UP AN AUTOMATIC CONNECTION

Some service providers may have customized the options on the Services menu.

Contact your service provider for more information if the options shown here are not available.

You can choose one of the following options for your GPRS connection.

From the menus, select Settings > Connectivity > GPRS > GPRS connection and one of the following:

Always online—The phone is automatically registered to a GPRS network when you turn your phone on. When you use the WAP browser, the connection between your phone and the network is created and data transfer is possible. When you exit the WAP browser, the GPRS connection ends but the registration to the GPRS network remains.

When needed—The GPRS connection is established when you use the WAP browser and is closed when you exit the WAP browser.

• RECEIVE A CALL WHILE ONLINE

If you are using the WAP browser over GPRS, you can still receive a voice call. Your data call is put on hold and you can choose to answer the call.

• To answer the incoming call, press the Talk key.

• To reject the incoming call, press the End key.

Note: After you end your voice call, the GPRS connection automatically resumes.

• MAKE A CALL WHILE ONLINE

When you are browsing a WAP site and want to make a call, select Options >

Other options > Use detail > Phone number. Your phone then searches the information on the WAP site for a string of numbers. You can then choose from the number or numbers displayed to place the call.

An alternate way is to press the End key to disconnect from the mobile Internet, then place your call by searching contacts for a name and number or by keying in the phone number.



Services (Menu 9)

• MAKE AN EMERGENCY CALL WHILE ONLINE

If you are using GPRS to connect to the mobile Internet, you can end your data connection and then make an emergency call.

1

To close your mobile Internet connection, press the End key.

2

Enter the emergency number for your present location (for example, 911).

3

Press the Talk key.

• OPTIONS WHILE ONLINE

While you are connected to the mobile Internet, select Options to access the following options. Some service providers may have customized these options. Contact your service provider for more information if any of the following options are not available.

Open list—Open a browser page.

Home—Start the browser and go to your service provider’s home page.

Shortcuts—Open a new list of options that can be, for example, specific to the current page.

Add bookmark—Save the current page as a bookmark.

Bookmarks—Display all saved bookmarks. Bookmarks help you find a WAP site quickly.

Download links—View the list of bookmarks for downloading content.

Save to folder—Save the current page in a folder.

Other options—View a list of other available options, including.

• Go to address—Go to another site on the mobile Internet.

• Service inbox—Receive service messages (“pushed” messages) from your service provider.

• Appear. settings—Set settings for text wrapping and image viewing.

• Use detail—Copy information, such as a phone number, from the page.

• Clear the cache—Empty information or services you have accessed from your phone memory.

• Security—Show security information about the current connection and the server.

Reload—Reload and update the current page.

Quit—Disconnect from a service.


97



• SECURITY

Cache memory

A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed are stored in the cache.

To clear the cache from the menu, select Services > Clear the cache.

To clear the cache while browsing, select Options > Other options > Clear the cache.

Certificates

To use some WAP services, such as banking services, you need an authority certificate.

Using the certificate can help you to improve the security of connections between your phone and a WAP server.

You can download the certificate from a WAP page if the WAP service supports the use of authority certificates. After the download, you can view the certificate, then save or delete it. If you save the certificate, it is added to the list of certificates in the phone.

Your phone alerts you if the identity of the WAP server or WAP gateway cannot be verified or is not authentic.

To view the list of authority certificates, from the menus, select Services > Settings >

Security settings > Authority certificates > Certificate list.

Security module

The security module improves security services and allows you to use a digital signature. It can contain certificates and public and private keys. Your service provider saves the certificates in the security module.

From the menus, select Services > Settings > Security settings > Security

module settings and one of the following:

Security module details—View the security module title, status, manufacturer, and serial number.

Module PIN request—Select On to set the phone to ask for the module PIN when using services provided by the security module.

Change module PIN—Change the module PIN, if allowed by the security module.

• ALLOW OR REJECT COOKIES

A cookie is data that a web site saves in your phone browser cache memory. The data can be, for example, your user information or your browsing preferences.

Cookies will be saved until you clear the cache memory.



Services (Menu 9)

1

From the menus, select Services > Settings > Security settings > Cookies.

OR

While browsing, select Options > Other options > Security settings > Cookies.

2

Select Allow to accept cookies or Decline to reject cookies.

• CREATE A DIGITAL SIGNATURE

You can make digital signatures with your phone. The signature can be traced back to you through the private key on the security module and the user certificate that was used to perform the signature. Using the digital signature can be the same as signing your name to a paper bill, contract or other document.

1

While browsing, select a link on a page, such as the title of the book you want to buy and its price.

The text to sign (possibly including amount, date, etc.) will be shown.

2

Check that the header text is Read and that the digital signature icon is shown. If the digital signature icon does not appear, there is a security breach, and you should not enter any personal data such as your signing PIN.

3

Read all of the text before signing, scrolling through the text if necessary.

4

To sign the text, select Sign.

5

Select the user certificate you want to use, enter the signing PIN (provided with the SIM card if the SIM card has a security module), and select OK.

The digital signature icon disappears, and the service may display a confirmation of your purchase.

• APPEARANCE SETTINGS

You can determine how pages appear on the phone display.

1

From the menus, select Services > Settings > Appearance settings.

OR

While browsing, select Options > Other options > Appear.settings.

2

Select one of the following options:

Text wrapping—Text on the web page continues on the next line if it cannot be shown on only one line. Select On to allow text wrapping, or Off to prevent text wrapping.

Font size—Select Small, Normal, or Large.

Show images—Select Yes to display pictures from the page, or No to hide pictures. When pictures are displayed, pages load more slowly.

Character encoding—Specify the character set that the phone uses for showing browser pages that do not include that information, or to specify whether to always use UTF-8 encoding when sending a Web address to a compatible phone.


99



16 Go to (Menu 10)

The Go to menu lets you access specific functions quickly. You can personalize the menu so that it lists the functions you use most frequently. See

“Personal shortcuts” on page 61 for instructions on setting up the Go to menu.



SIM services (Menu 11)

17 SIM services (Menu 11)

In addition to the functions available on the phone, your SIM card may provide additional services that you can access in this menu. This menu is shown only if it is supported by your SIM card. The name and contents of the menu depend entirely on the service available. For availability, rates, and information on using SIM services, contact your service provider.

To see the messages sent between the phone and the network when you are using the SIM services, select Settings > Phone settings > Confirm SIM service

actions > Yes.

Accessing these services may involve sending a text message or making a phone call for which you may be charged.


101



18 Instant messaging

You can now take text messaging to the next level by experiencing instant messaging in a wireless environment. You can engage in instant messaging with friends and family, regardless of the mobile system or platform (like the Internet) they are using. It is different from using SMS or e-mail addresses to send messages because you can have a true, two-way conversation. The contact list feature shows you when your friends, family members, and colleagues are online and available to exchange instant messages. Simply select the name, write the message, and send it. Your message stays on the screen and when the recipient replies, the reply appears on the screen, above your original message, so you can track the conversation.

Before you can start using instant messaging, you must first subscribe to the text messaging service. Contact your service provider for details about pricing for sending and receiving messages. You must also obtain a user name and password before you can use instant messaging. See “Obtain user name and password” on page 103 for more information.

Note: If instant messaging is not available from your wireless service provider, the IM screen may not appear. Contact your service provider for more information.

• NETWORK SELECTION

With IM, you have the choice of selecting the instant messaging service (network) you want to use. Since each instant messaging service has its own display text and icons associated with it, the display text and icons on your phone may appear differently than what is displayed in this user guide update. If you have any questions about the differences in the various networks’ display text and icons, contact your service provider for more information.

The following table shows the instant messaging icons and their descriptions. The icons and display text may appear differently, depending on which instant messaging service you use.

Available

Do not disturb/discreet

Appear offline

Available with an alert set

Offline with an alert set



Instant messaging

Blocked contact

Unread message/new message

Read message

Group invitation

• OBTAIN USER NAME AND PASSWORD

Before you can begin to use instant messaging, you must obtain a user name and password. You can do this by registering over the Internet (using your computer) with the IM service provider you have selected to use. During the registration process you will have the opportunity to create the user name and password of your choice. For more information about signing up for instant messaging services, contact your wireless service provider.

• LOG INTO SERVICE

The first time you use instant messaging, you will need to enter your user name and password and select the network you want to use, in order to log into the service.

After the first login, you will not have to select the network again, unless you want to change it. See “Instant messaging settings” on page 109 for more information.

Every time you log in, you will receive screen prompts for your user name and password.

You do not have to manually enter your user name (the user name you entered previously appears on the User ID screen); however, you must manually enter your password every time you log in. To log in for the first time, perform the following steps:

1

From the menus, select IM > Login and the network to which you want to connect.

A confirmation note appears, then the User ID screen.

2

Enter your user name, and select Options > OK.

The Password screen appears.

3

Enter your password, and select Options > OK.

Logging in appears, then Logged in, followed by the IM online menu.

After you have logged into instant messaging initially, you have the option of a manual login or an automatic login. See “Set up automatic login” on page 110 for information on setting up automatic login.


103



• SET YOUR AVAILABILITY

You can determine if other users can tell whether you are available or not.

From the IM online menu, select Availability and one of the following:

Available—Others see your status as online and you receive availability information and messages from others.

Do not disturb—Although others see your status as online, you do not receive availability information and messages from others.

Appear offline—Although others see your status as offline, you receive availability information and messages from others.

• INSTANT MESSAGES

You can send instant messages to anyone if you have the person’s user name. You can also add that person to your contact list during an instant messaging session.

See “Add a new contact from the inbox” on page 106 for instructions.

Write and send instant messages

1

From the IM online menu, select My contacts > Write message.

The User ID screen appears.

2

Enter the user name of the person to whom you want to send an instant message.

3

Select Options > OK.

The Conversation view appears with the contact’s name at the top.

4

Select Options > Write message and enter a message.

Note: Predictive text input is automatically enabled for writing messages.

See “Predictive text input” on page 21 for information on using predictive text.

5


Receive and reply to instant messages

When you receive an instant message, a screen appears, showing you have a new instant message with the name of the sender.

1

Select Open > Options > Write message and enter a message.

2


• CHAT SESSIONS

If you want to chat with a person, you must first add that person to the contact list. See “Add a new contact to the contact list” on page 106 for instructions.



Instant messaging

Chat session from the contact list view

1

From the IM online menu, select My contacts.

2

Select the contact with whom you want to chat; then select Chat.

The conversation view appears with the contact’s name at the top.

3

Select Options > Write message and enter a message.

4


The conversation view appears with your user name and message displaying.

5

After your contact replies, repeat steps 3-4 to continue your chat session.

Chat session from the inbox view

You can only initiate a chat session from this view, if an active chat is open or has been saved. See “Save chat history” on page 105 for information on saving chat sessions.

1

From the IM online menu, select Inbox.

2

Scroll to the contact with whom you want to chat.

3

Select Options > Open > Options > Write message and enter a message.

4


The conversation view appears with your user name and most recent message displaying.

5

After your contact replies, repeat steps 4-5 to continue your chat session.

Quit chat session

From the conversation view, select Back > Options > End convers.

Conversation ended appears.

Save chat history

1

From the conversation view, select Options > Save.

The Conversation name screen appears.

2

Enter the name you want to use for the conversation and select Options > Save.

Conversation saved appears.

View chat history

From the IM offline menu, select Saved convers. and the chat history you want to view.

Rename chat history

1

From the IM offline menu, select Saved convers. and the chat history you want to rename.


105



2

Select Options > Rename.

3

Select Clear as many times as necessary to delete the current chat history name; then enter the new chat history name.

4


Conversation renamed appears.

Delete chat history

1

From the IM offline menu, select Saved convers. and the chat history you want to delete.

2

Select Options > Delete.

Conversation deleted appears.

• CONTACTS

You can add the names of your friends and family with whom you will be interacting frequently via instant messaging to your contact list.

Add a new contact to the contact list

1

From the IM online menu, select My contacts > Add contact.

The User ID screen appears.

2

Enter the contact’s user name, and select Options > OK.

The Nickname screen appears.

3

Enter the contact’s nickname, and select Options > OK.

Updating information appears, then Added to IM contacts appears.

Add a new contact from the inbox

You can add a new contact from the Inbox, if you have saved an instant messaging session with that contact.

1

From the IM online menu, select Inbox.

2

Scroll to the contact name that you want to add, and select Options >Add.

The User ID screen appears, with the contact’s user name displaying.

3


The Nickname screen appears, with the contact’s nickname displaying.

4

If you want to change the nickname, select Clear as many times as necessary to delete the nickname, and enter the new nickname.

5


Updating information appears, then Added to IM contacts appears.



Instant messaging

Search for a contact

From the IM online menu, select My contacts > Search and one of the following:

Screen name—Enter the first few characters of the contact’s screen name, and select Options > Search.

User ID—Enter the first few characters of the contact’s user name, and select

Options > Search.

Phone number—Enter the first few numbers of contact’s phone number, and select


E-mail—Enter the first few characters of the contact’s e-mail address, and select


Remove a contact from the contact list

1


2

Select the contact name you want to remove; then select Remove contact.

A message appears, asking if you want to remove the contact.

3

Select OK.

Updating information appears, followed by a confirmation note.

Block messages from a contact

1


2

Select the contact from whom you want to block messages; then select

Block contact.

A message appears, asking if you want to block messages from the contact.

3

Select OK.


Unblock messages from a contact

1


2

Select the contact from whom you want to unblock messages; then select Unblock.

A message appears, asking if you want to unblock messages from the contact.

3

Select OK.


Set an alert for a contact

You can set an alert for a contact to notify you when the contact’s availability changes.

1



107



2

Select the contact for whom you want to set an alert; then select Set alert.

Alert set appears.

Release an alert for a contact

1


2

Select the contact for whom you want to release an alert; then select Release

user status alert.

User status alert released appears.

• PRIVATE GROUPS

You can create your own private chat groups. The participants must be entered in your contact list. See “Contacts” on page 106 for more information.

Create private chat group

1

From the IM online menu, select Group convers..

The Group name screen appears.

2

Enter the group name and select Options > OK.

Your screen name appears.

Note: You can enter up to ten characters for the group name.

3


Updating information appears, then a confirmation note, followed by the conversation view with the group name at the top.

Add members to private group chat

1

From the group’s conversation view, select Options > Group members > Send

invitation and the contact whom you want to invite to the group chat.

The Invitation screen appears.

2

Enter the invitation text, and select Options > Send.

A confirmation note appears, then the group list.

3

To add other members to the group, repeat steps 1–2.

Remove private group members

1

In the group list, scroll to the member you want to remove.

2

Select Options > Remove memb..

A message appears, asking you if you want to remove the member.

3

Select OK.




Instant messaging

Save a private group chat

1

From the group’s conversation view, select Options > Save.

The Conversation name screen appears.

2

Enter the name you want to use for the group and select Options > Save.

Conversation saved appears.

Invitations to group chat

When you receive an invitation to a group chat, the New invitation received screen appears, with the user name of the invitation sender displaying.

ACCEPT INVITATIONS TO GROUP CHAT

1

Select Accept.

The Screen name screen appears, with your screen name displaying.

2



REJECT INVITATIONS TO GROUP CHAT

Select Reject. Invitation rejected appears.

• INSTANT MESSAGING SETTINGS

You can customize your instant messaging settings, depending upon the instant messaging service you have selected. After you open instant messaging, select

Settings. The following options appear:

Settings—Change your User ID, Password, GPRS address, SMS number, Bearer, and Service name.

Screen name—Change your screen name.

Auto login—Set your login to the automatic state.

Contact ordering—Display your contacts by either Alphabetic or By status order.

Availability—Update your contacts’ online availability (presence) by using the

Updates option, or display how your presence is seen by other users by using the

Authorization option.

Set up screen name

You can set up or revise a screen name that is 1–20 characters in length.

Note: You must enter at least one character for your screen name. A blank screen name is not allowed. You must have a screen name to be able to join a group chat.


109



1

From the IM menu, select Settings > Screen name.

The Screen name screen appears.

2

Enter your screen name and select Options > OK.

Screen name saved appears.

Set up automatic login

You can use automatic login after you have logged in with the user name and password provided by your service provider.

From the IM menu, select Settings > Auto login > On IM start-up.

Set up contacts order

From the IM menu, select Settings > Contact ordering > Alphabetic or By status.

Set up presence status and authorization

Presence allows you and other users to know who is online and available to chat.

You can set your phone to automatically update a contact’s presence status every time it is changed.

SET STATUS

From the IM menu, select Settings > Availability > Updates > On.

A confirmation note appears.

SET AUTHORIZATION

From the IM menu, select Settings > Availability > Authorization > My contacts or All.

A confirmation note appears.

Note: If you select My contacts, only the contacts in your contact list can view your presence information. If you select All, anybody can view your presence information.

• LOG OFF SERVICE

From the IM online menu, you can exit the IM application but still stay connected to the IM service. This enables you to receive instant messages and chat invitations from your contacts while using your phone for other purposes, such as playing a game.

If you are connected to your IM service, but you have not used your IM application for some time, you may be automatically disconnected from the IM service. The next time you open the IM application, you will receive a message, Not connected and you will be taken to the offline menu where you have to log in again.

To disconnect from the IM service, you must log out from the online menu. You will then be taken to the offline menu, where you can log in again or exit the

IM application.



Instant messaging

Exit instant messaging

1

Select Back until Closing application appears.

The IM main menu screen appears.

2

Select Exit.

If you open IM again, you do not need to log in again.

Log out of instant messaging

1

From the IM menu, select Logout.

Logout and end all chat sessions? appears.

2

Select OK.

3

Logging out appears, followed by a confirmation note.

4

If you want to exit IM, select Back until Closing application appears.

The IM main menu screen appears.

5

Select Exit.

If you open IM again, you do not need to log in again.


111



19 Hardware and enhancements

• HARDWARE

Connection ports and other tools

• Charger connector (1)

• Flashlight (2)

• Pop-Port™ connector for headsets and data cables (3)

• IR (infrared) port (4)

• Camera lens on the back cover of the phone (5)

2 3

4

5

1

Recharge the battery

Your phone is powered by a rechargeable battery. To charge the battery:

1

Plug the charger transformer in to a standard ac outlet.

2

Insert the charger output plug into the round connector at the bottom end of the phone.

After a few seconds, the battery indicator in the display starts to scroll from bottom to top. If the battery is completely flat, it may take a few minutes before the charging indicator appears on the display or any calls can be made.

You can use the phone while the charger is connected.

The battery provides up to 4 hours of talk time and up to 12 days of standby time.

Operation times are estimates and may vary depending on network conditions, charging and phone use.



Hardware and enhancements

Cut-out covers

You can use cut-out covers to quickly change the look of your phone. The phone is supplied with some ready-to-use cut-out covers.

Warning: Before changing covers, ensure the phone is powered off and disconnected from the charger or any other device. Avoid touching electronic components while changing the covers. Always store and use the phone with the covers attached.

1

Remove the back cover as described in “Remove the back cover” on page 14.

2

To remove the front cover, gently pull the top of the front cover from the phone.

3

Remove the old back cut-out cover from the back cover.

4

Remove the keymat and the old front cut-out cover from the front cover.

5

Place the new front cut-out cover on the front cover, then replace the keymat.


113



6

To replace the front cover, align the top of the phone with the top of the cover and press the bottom of the phone towards the cover until it snaps into place.

7

Place the new back cut-out cover into the back cover by sliding the cut-out cover under the two guides in the middle and at the bottom of the back cover.

8

Replace the back cover as described in “Replace the back cover” on page 15.

• ENHANCEMENTS

Power

• 720-mAh Li-Ion Battery (BLD-3)

• Standard Travel Charger (ACP-7)

• Rapid Travel Charger (ACP-8)

• Travel Charger (ACP-12)

• Mobile Charger (LCH-12)

• Spare Battery Charger (DDC-1) is compatible with:

Standard Travel Charger (ACP-7)

Rapid Travel Charger (ACP-8)

Data

• Data cable (DKU-5)

• Desktop Stand (DCV-14) is compatible with:

Data cable (DKU-5)

Carrying

• Wrist strap (CP-6)

114

Audio

• Music stand (DT-1)

• Headset (HS-5)

• Boom headset (HDB-4)

• Stereo headset (HDS-3)

• Retractable headset (HS-10)

• Loopset (LPS-4)

Accessibility

• Phone adapter (HDA-10)

Car

• Car installation kit (CARK-126)

• Full car kit (CARK-143)

• Antenna coupler (AXF-15S)

• Mobile holder (MBC-15S)

• Privacy handset (HSU-3)

• Headrest handsfree (BHF-1)



Reference information

20 Reference information

• BATTERY INFORMATION

Charging and discharging

Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles.

The battery can be charged and discharged hundreds of times but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, buy a new battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device.

Unplug the charger from the electrical plug and the device when not in use. Do not leave the battery connected to a charger. Overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time. Temperature extremes can affect the ability of your battery to charge.

Use the battery only for its intended purpose. Never use any charger or battery that is damaged.

Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.)

This might happen, for example, when you carry a spare battery in your pocket or purse.

Short-circuiting the terminals may damage the battery or the connecting object.

Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 59°F and 77°F (15°C and 25°C). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing.

Do not dispose of batteries in a fire! Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste.

• ENHANCEMENTS

A few practical rules about accessories and enhancements:

• Keep all accessories and enhancements out of the reach of small children.

• When you disconnect the power cord of any accessory or enhancement, grasp and pull the plug, not the cord.

• Check regularly that enhancements installed in a vehicle are mounted and are operating properly.

• Installation of any complex car enhancements must be made by qualified personnel only.


115



• ENHANCEMENTS, BATTERIES, AND CHARGERS

Check the model number of any charger before use with this device. This device is intended for use when supplied with power from ACP-7, ACP-8, ACP-12, and LCH-12.

Warning: Use only batteries, chargers, and enhancements approved by

Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.

For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.

Your device and its enhancements may contain small parts. Keep them out of reach of small children.

• CARE AND MAINTENANCE

Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage and enjoy your device for many years.

• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it.

• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.

• Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.

• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.

• Do not attempt to open the device other than as instructed in this guide.

• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.

• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.

• Do not paint the device. Paint can clog the moving parts and prevent proper operation.

• Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity sensor, and light sensor lenses).

• Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the device and may violate regulations governing radio devices.




All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service.

• ADDITIONAL SAFETY INFORMATION

Operating environment

Remember to follow any special regulations in force in any area and always switch off your device when its use is prohibited or when it may cause interference or danger.

Use the device only in its normal operating positions. To maintain compliance with radio frequency exposure guidelines only use accessories approved by Nokia for use with this device. When the device is on and being worn on the body, always use an approved carrying case.

Medical devices

Operation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your phone in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.

PACEMAKERS

Pacemaker manufacturers recommend that a minimum separation of 6 inches

(15.3 cm) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology

Research. To minimize the potential for interference, persons with pacemakers should

• always keep the device more than 6 inches (15.3 cm) from their pacemaker when the device is switched on

• not carry the device in a breast pocket

• hold the device to the ear opposite the pacemaker

If you have any reason to suspect that interference is taking place, switch off your device immediately.

HEARING AID

Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.


117



Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, air bag systems. For more information, check with the manufacturer or its representative of your vehicle or any equipment that has been added.

Only qualified personnel should service the device, or install the device in a vehicle.

Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that an air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.

Potentially explosive environments

Switch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refuelling points such as near gas pumps at service stations.

Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas, chemical plants or where blasting operations are in progress.

Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust or metal powders.

FCC regulations prohibit using your wireless device while in the air. The use of wireless telephones in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal.

Failure to observe these instructions may lead to suspension or denial of telephone services to the offender, legal action, or both.




EMERGENCY CALLS

Important: Wireless phones, including this phone, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless phone for essential communications like medical emergencies.

To make an emergency call:

1

If the phone is not on, switch it on. Check for adequate signal strength. Some networks may require that a valid SIM card is properly inserted in the phone.

2

Press End key as many times as needed to clear the display and ready the phone for calls.

3

Key in the official emergency number for your present location. Emergency numbers vary by location.

4

Press the Send key.

If certain features are in use, you may first need to turn those features off before you can make an emergency call. Consult this guide or your service provider. When making an emergency call, give all the necessary information as accurately as possible. Your wireless phone may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so.


119



CERTIFICATION INFORMATION (SAR)

THIS MODEL PHONE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE

TO RADIO WAVES.

Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.

The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is

1.6W/kg.* Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.

Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (for example, at the ear and worn on the body) as required by the FCC for each model.

The following values are the highest SAR values for this model phone as reported to the FCC.

When tested for use at the ear:

FCCID # L JPRH-30 is 0.46 W/kg


When worn on the body as described in this user guide:



(Body-worn measurements differ among phone models, depending upon available enhancements and FCC requirements).




While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display

Grant section of http://www.fcc.gov/oet/fccid after searching on

FCC ID LJPRH-30 and FCC ID LJPRH-31.

For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines for use with a carry case, belt clip, or holder that contains no metal and that positions the handset a minimum of 7/8-inch (2.2 cm) from the body. Use of other carry cases, belt clips, or holders may not ensure compliance with FCC RF exposure guidelines. If you do not use a body-worn accessory and are not holding the phone at the ear, position the handset a minimum of 7/8-inch (2.2 cm) from your body when the phone is switched on.

*In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. SAR values may vary depending on national reporting requirements and the network band. For SAR information in other regions please look under product information at

www.nokia.com.


121



21 Technical information

Feature

Dimensions

Weight

Wireless networks

Size (volume)

Frequency range (Tx)

Specification

Width 45.1 mm

Height 107.5 mm

Depth 20.8 mm

90 g with BLD-3 Li-Ion Battery

GSM 850, 900, 1800, and 1900 networks

81 cm

3

GSM 850: 824–849 MHz (for RH-31)

GSM 900: 880–915 MHz (for RH-30)

GSM 1800: 1710–1785 MHz (for RH-30 and RH-31)


Frequency range (Rx)

GSM 850: 869–894 MHz (for RH-31)

GSM 900: 925–960 MHz (for RH-30)



2 W (max)

Tx output power

Battery voltage

Number of channels

3.7 Vdc

299

Memory capacity

8 MB flash memory

1.5 MB RAM

Operating temperature

Between 59°F and 77°F (15°C and 25°C).

Number of entries in contacts

Up to 250



Nokia one-year limited warranty

22 Nokia one

-

year limited warranty

Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”) is free from defects in material and workmanship that result in Product failure during normal usage, according to the following terms and conditions:

1

The limited warranty for the Product extends for ONE (1) year beginning on the date of the purchase of the Product. This one year period is extended by each whole day that the Product is out of your possession for repair under this warranty.

2

The limited warranty extends only to the original purchaser (“Consumer”) of the

Product and is not assignable or transferable to any subsequent purchaser/ end-user.

3

The limited warranty extends only to Consumers who purchase the Product in the United States of America.

4

During the limited warranty period, Nokia will repair, or replace, at Nokia’s sole option, any defective parts, or any parts that will not properly operate for their intended use with new or refurbished replacement items if such repair or replacement is needed because of product malfunction or failure during normal usage. No charge will be made to the Consumer for any such parts. Nokia will also pay for the labor charges incurred by Nokia in repairing or replacing the defective parts. The limited warranty does not cover defects in appearance, cosmetic, decorative or structural items, including framing, and any non-operative parts. Nokia’s limit of liability under the limited warranty shall be the actual cash value of the Product at the time the Consumer returns the Product for repair, determined by the price paid by the Consumer for the Product less a reasonable amount for usage. Nokia shall not be liable for any other losses or damages. These remedies are the Consumer’s exclusive remedies for breach of warranty.

5

Upon request from Nokia, the Consumer must prove the date of the original purchase of the Product by a dated bill of sale or dated itemized receipt.

6

The Consumer shall bear the cost of shipping the Product to Nokia in

Melbourne, Florida. Nokia shall bear the cost of shipping the Product back to the Consumer after the completion of service under this limited warranty.

7

The Consumer shall have no coverage or benefits under this limited warranty if any of the following conditions are applicable:

a)

The Product has been subjected to abnormal use, abnormal conditions, improper storage, exposure to moisture or dampness, unauthorized modifications, unauthorized connections, unauthorized repair, misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the fault of Nokia, including damage caused by shipping.


123



b)

The Product has been damaged from external causes such as collision with an object, or from fire, flooding, sand, dirt, windstorm, lightning, earthquake or damage from exposure to weather conditions, an Act of God, or battery leakage, theft, blown fuse, or improper use of any electrical source, damage caused by computer or Internet viruses, bugs, worms, Trojan Horses, cancelbots or damage caused by the connection to other products not recommended for interconnection by Nokia.

c)

Nokia was not advised in writing by the Consumer of the alleged defect or malfunction of the Product within fourteen (14) days after the expiration of the applicable limited warranty period.

d)

The Product serial number plate or the enhancement data code has been removed, defaced or altered.

e)

The defect or damage was caused by the defective function of the cellular system or by inadequate signal reception by the external antenna, or viruses or other software problems introduced into the Product.

8

Nokia does not warrant uninterrupted or error-free operation of the Product.

If a problem develops during the limited warranty period, the Consumer shall take the following step-by-step procedure:

a)

The Consumer shall return the Product to the place of purchase for repair or replacement processing.

b)

If “a” is not convenient because of distance (more than 50 miles) or for other good cause, the Consumer shall ship the Product prepaid and insured to:

Nokia Inc., Attn.: Repair Department

795 West Nasa Blvd.

Melbourne, FL 32901

c)

The Consumer shall include a return address, daytime phone number and/ or fax number, complete description of the problem, proof of purchase and service agreement (if applicable). Expenses related to removing the

Product from an installation are not covered under this limited warranty.

d)

The Consumer will be billed for any parts or labor charges not covered by this limited warranty. The Consumer will be responsible for any expenses related to reinstallation of the Product.

e)

Nokia will repair the Product under the limited warranty within 30 days after receipt of the Product. If Nokia cannot perform repairs covered under this limited warranty within 30 days, or after a reasonable number of attempts to repair the same defect, Nokia at its option, will provide a replacement Product or refund the purchase price of the Product less a reasonable amount for usage. In some states the Consumer may have the right to a loaner if the repair of the Product takes more than ten (10) days.



Nokia one-year limited warranty

Please contact the Customer Service Center at Nokia at the telephone number listed at the end of this warranty if you need a loaner and the repair of the Product has taken or is estimated to take more than ten (10) days.

f)

If the Product is returned during the limited warranty period, but the problem with the Product is not covered under the terms and conditions of this limited warranty, the Consumer will be notified and given an estimate of the charges the Consumer must pay to have the Product repaired, with all shipping charges billed to the Consumer. If the estimate is refused, the

Product will be returned freight collect. If the Product is returned after the expiration of the limited warranty period, Nokia’s normal service policies shall apply and the Consumer will be responsible for all shipping charges.

9

YOU (THE CONSUMER) UNDERSTAND THAT THE PRODUCT MAY CONSIST OF

REFURBISHED EQUIPMENT THAT CONTAINS USED COMPONENTS, SOME OF

WHICH HAVE BEEN REPROCESSED. The used components comply with Product performance and reliability specifications.

10 ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR

PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION OF THE FOREGOING

LIMITED WRITTEN WARRANTY. OTHERWISE, THE FOREGOING LIMITED WARRANTY

IS THE CONSUMER’S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL

OTHER WARRANTIES, EXPRESS OR IMPLIED. NOKIA SHALL NOT BE LIABLE FOR

SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, INCLUDING

BUT NOT LIMITED TO LOSS OF ANTICIPATED BENEFITS OR PROFITS, LOSS OF

SAVINGS OR REVENUE, LOSS OF DATA, PUNITIVE DAMAGES, LOSS OF USE OF

THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF

ANY SUBSTITUTE EQUIPMENT OR FACILITIES, DOWNTIME, THE CLAIMS OF ANY

THIRD PARTIES, INCLUDING CUSTOMERS, AND INJURY TO PROPERTY, RESULTING

FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM BREACH

OF THE WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY

OTHER LEGAL OR EQUITABLE THEORY, EVEN IF NOKIA KNEW OF THE LIKELIHOOD

OF SUCH DAMAGES. NOKIA SHALL NOT BE LIABLE FOR DELAY IN RENDERING

SERVICE UNDER THE LIMITED WARRANTY, OR LOSS OF USE DURING THE

PERIOD THAT THE PRODUCT IS BEING REPAIRED.

11 Some states do not allow limitation of how long an implied warranty lasts, so the one year warranty limitation may not apply to you (the Consumer). Some states do not allow the exclusion or limitation of incidental and consequential damages, so certain of the above limitations or exclusions may not apply to you

(the Consumer). This limited warranty gives the Consumer specific legal rights and the Consumer may also have other rights which vary from state to state.

12 Nokia neither assumes nor authorizes any authorized service center or any other person or entity to assume for it any other obligation or liability beyond that which is expressly provided for in this limited warranty including the provider or seller of any extended warranty or service agreement.


125



13 This is the entire warranty between the Nokia and the Consumer, and supersedes all prior and contemporaneous agreements or understandings, oral or written, relating to the Product, and no representation, promise or condition not contained herein shall modify these terms.

14 This limited warranty allocates the risk of failure of the Product between the

Consumer and Nokia. The allocation is recognized by the Consumer and is reflected in the purchase price.

15 Any action or lawsuit for breach of warranty must be commenced within eighteen (18) months following purchase of the Product.

16 Questions concerning this limited warranty may be directed to:

Nokia Inc.

Attn.: Customer Service

7725 Woodland Center Blvd., Suite. 150

Tampa, FL 33614

Telephone: 1-888-NOKIA-2U (1-888-665-4228)

Facsimile: (813) 287-6612

TTY/TDD Users Only: 1-800-24-NOKIA (1-800-246-6542)

17 The limited warranty period for Nokia supplied attachments and enhancements is specifically defined within their own warranty cards and packaging.



Appendix A

Appendix A

Message from the CTIA

(Cellular Telecommunications

& Internet Association) to all users of mobile phones.

© 2001 Cellular Telecommunications & Internet Association.

All Rights Reserved.1250 Connecticut Avenue, NW Suite 800,

Washington, DC 20036. Phone: (202) 785-0081


127



Safety is the most important call you will ever make.

A Guide to Safe and Responsible Wireless Phone Use

Tens of millions of people in the U.S. today take advantage of the unique combination of convenience, safety and value delivered by the wireless telephone. Quite simply, the wireless phone gives people the powerful ability to communicate by voice--almost anywhere, anytime--with the boss, with a client, with the kids, with emergency personnel or even with the police. Each year, Americans make billions of calls from their wireless phones, and the numbers are rapidly growing.

But an important responsibility accompanies those benefits, one that every wireless phone user must uphold. When driving a car, driving is your first responsibility. A wireless phone can be an invaluable tool, but good judgment must be exercised at all times while driving a motor vehicle--whether on the phone or not.

The basic lessons are ones we all learned as teenagers. Driving requires alertness, caution and courtesy. It requires a heavy dose of basic common sense---keep your head up, keep your eyes on the road, check your mirrors frequently and watch out for other drivers. It requires obeying all traffic signs and signals and staying within the speed limit. It means using seatbelts and requiring other passengers to do the same.

But with wireless phone use, driving safely means a little more. This brochure is a call to wireless phone users everywhere to make safety their first priority when behind the wheel of a car. Wireless telecommunications is keeping us in touch, simplifying our lives, protecting us in emergencies and providing opportunities to help others in need.

When it comes to the use of wireless phones, safety is your most important call.

Wireless Phone "Safety Tips"

Below are safety tips to follow while driving and using a wireless phone which should be easy to remember.

1 Get to know your wireless phone and its features such as speed dial and redial.

Carefully read your instruction manual and learn to take advantage of valuable features most phones offer, including automatic redial and memory. Also, work to memorize the phone keypad so you can use the speed dial function without taking your attention off the road.

2 When available, use a hands free device. A number of hands free wireless phone accessories are readily available today. Whether you choose an installed mounted device for your wireless phone or a speaker phone accessory, take advantage of these devices if available to you.

3 Position your wireless phone within easy reach. Make sure you place your wireless phone within easy reach and where you can grab it without removing your eyes from the road. If you get an incoming call at an inconvenient time, if possible, let your voice mail answer it for you.



Appendix A

4 Suspend conversations during hazardous driving conditions or situations. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow and ice can be hazardous, but so is heavy traffic. As a driver, your first responsibility is to pay attention to the road.

5 Do not take notes or look up phone numbers while driving. If you are reading an address book or business card, or writing a "to do" list while driving a car, you are not watching where you are going. It’s common sense. Don’t get caught in a dangerous situation because you are reading or writing and not paying attention to the road or nearby vehicles.

6 Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan your calls before you begin your trip or attempt to coincide your calls with times you may be stopped at a stop sign, red light or otherwise stationary. But if you need to dial while driving, follow this simple tip--dial only a few numbers, check the road and your mirrors, then continue.

7 Do not engage in stressful or emotional conversations that may be distracting.

Stressful or emotional conversations and driving do not mix--they are distracting and even dangerous when you are behind the wheel of a car. Make people you are talking with aware you are driving and if necessary, suspend conversations which have the potential to divert your attention from the road.

8 Use your wireless phone to call for help. Your wireless phone is one of the greatest tools you can own to protect yourself and your family in dangerous situations--with your phone at your side, help is only three numbers away. Dial

9-1-1 or other local emergency number in the case of fire, traffic accident, road hazard or medical emergency. Remember, it is a free call on your wireless phone!

9 Use your wireless phone to help others in emergencies. Your wireless phone provides you a perfect opportunity to be a "Good Samaritan" in your community.

If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you.

10 Call roadside assistance or a special wireless non-emergency assistance number when necessary. Certain situations you encounter while driving may require attention, but are not urgent enough to merit a call for emergency services. But you still can use your wireless phone to lend a hand. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number.

Careless, distracted individuals and people driving irresponsibly represent a hazard to everyone on the road. Since 1984, the Cellular Telecommunications Industry

Association and the wireless industry have conducted educational outreach to inform wireless phone users of their responsibilities as safe drivers and good citizens. As we approach a new century, more and more of us will take advantage of the benefits of wireless telephones. And, as we take to the roads, we all have a responsibility to drive safely.

The wireless industry reminds you to use your phone safely when driving.


129



For more information, please call 1-888-901-SAFE.

For updates: http://www.wow-com.com/consumer/issues/driving/ articles.cfm?ID=85

© 2001 Cellular Telecommunications & Internet Association. All Rights Reserved.

1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036.

Phone: (202) 785-0081



Appendix B

Appendix B

Message from the FDA (U.S.

Food and Drug Administration) to all users of mobile phones.

July 18, 2001 .....

For updates: http://www.fda.gov/cdrh/phones


131



Consumer Update on Wireless Phones

U.S. Food and Drug Administration

1. Do wireless phones pose a health hazard?

The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radiofrequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results.

2. What is FDA's role concerning the safety of wireless phones?

Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists.

Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following:

• Support needed research into possible biological effects of RF of the type emitted by wireless phones;

• Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and

• Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human health.

FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group:

• National Institute for Occupational Safety and Health

• Environmental Protection Agency

• Federal Communications Commission

• Occupational Safety and Health Administration

• National Telecommunications and Information Administration

The National Institutes of Health participates in some interagency working group activities, as well.



Appendix B

FDA shares regulatory responsibilities for wireless phones with the Federal

Communications Commission (FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones. FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the

RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones. Base stations are thus not the subject of the safety questions discussed in this document.

3. What kinds of phones are the subject of this update?

The term wireless phone refers here to hand-held wireless phones with built-in antennas, often called cell mobile or PCS phones. These types of wireless phones can expose the user to measurable radiofrequency energy (RF) because of the short distance between the phone and the user’s head. These RF exposures are limited by

Federal Communications Commission safety guidelines that were developed with the advice of FDA and other federal health and safety agencies. When the phone is located at greater distances from the user, the exposure to RF is drastically lower because a person's RF exposure decreases rapidly with increasing distance from the source. The so-called cordless phones; which have a base unit connected to the telephone wiring in a house, typically operate at far lower power levels, and thus produce RF exposures far below the FCC safety limits.

4. What are the results of the research done already?

The research done thus far has produced conflicting results, and many studies have suffered from flaws in their research methods. Animal experiments investigating the effects of radiofrequency energy (RF) exposures characteristic of wireless phones have yielded conflicting results that often cannot be repeated in other laboratories.

A few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in laboratory animals. However, many of the studies that showed increased tumor development used animals that had been genetically engineered or treated with cancer-causing chemicals so as to be pre-disposed to develop cancer in the absence of RF exposure. Other studies exposed the animals to

RF for up to 22 hours per day. These conditions are not similar to the conditions under which people use wireless phones, so we don’t know with certainty what the results of such studies mean for human health.

Three large epidemiology studies have been published since December 2000.

Between them, the studies investigated any possible association between the use of wireless phones and primary brain cancer, glioma, meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the studies demonstrated the existence of any harmful health effects from wireless phone RF exposures. However, none of the studies can answer questions about long-term exposures, since the average period of phone use in these studies was around three years.


133



5.What research is needed to decide whether RF exposure from wireless phones poses a health risk?

A combination of laboratory studies and epidemiological studies of people actually using wireless phones would provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years. However, very large numbers of animals would be needed to provide reliable proof of a cancer promoting effect if one exists. Epidemiological studies can provide data that is directly applicable to human populations, but 10 or more years follow-up may be needed to provide answers about some health effects, such as cancer. This is because the interval between the time of exposure to a cancer-causing agent and the time tumors develop - if they do - may be many, many years. The interpretation of epidemiological studies is hampered by difficulties in measuring actual RF exposure during day-to-day use of wireless phones. Many factors affect this measurement, such as the angle at which the phone is held, or which model of phone is used.

6. What is FDA doing to find out more about the possible health effects of wireless phone RF?

FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radiofrequency energy (RF).

FDA has been a leading participant in the World Health Organization International

Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The Project has also helped develop a series of public information documents on EMF issues.

&

Internet Association (CTIA) have a FDA and the Cellular Telecommunications formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIAfunded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world.

7. How can I find out how much radiofrequency energy exposure I can get by using my wireless phone?

All phones sold in the United States must comply with Federal Communications

Commission (FCC) guidelines that limit radiofrequency energy (RF) exposures.

FCC established these guidelines in consultation with FDA and the other federal health and safety agencies. The FCC limit for RF exposure from wireless telephones is set at a Specific Absorption Rate (SAR) of 1.6 watts per kilogram (1.6 W/kg).

The FCC limit is consistent with the safety standards developed by the Institute of

Electrical and Electronic Engineering (IEEE) and the National Council on Radiation

Protection and Measurement. The exposure limit takes into consideration the body’s ability to remove heat from the tissues that absorb energy from the wireless phone and is set well below levels known to have effects.



Appendix B

Manufacturers of wireless phones must report the RF exposure level for each model of phone to the FCC. The FCC website (http://www.fcc.gov/oet/rfsafety) gives directions for locating the FCC identification number on your phone so you can find your phone’s RF exposure level in the online listing.

8. What has FDA done to measure the radiofrequency energy coming from wireless phones?

The Institute of Electrical and Electronic Engineers (IEEE) is developing a technical standard for measuring the radiofrequency energy (RF) exposure from wireless phones and other wireless handsets with the participation and leadership of FDA scientists and engineers. The standard, Recommended Practice for Determining the

Spatial-Peak Specific Absorption Rate (SAR) in the Human Body Due to Wireless

Communications Devices: Experimental Techniques, sets forth the first consistent test methodology for measuring the rate at which RF is deposited in the heads of wireless phone users. The test method uses a tissue-simulating model of the human head. Standardized SAR test methodology is expected to greatly improve the consistency of measurements made at different laboratories on the same phone.

SAR is the measurement of the amount of energy absorbed in tissue, either by the whole body or a small part of the body. It is measured in watts/kg (or milliwatts/g) of matter. This measurement is used to determine whether a wireless phone complies with safety guidelines.

9. What steps can I take to reduce my exposure to radiofrequency energy from my wireless phone?

If there is a risk from these products--and at this point we do not know that there is--it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radiofrequency energy (RF). Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure.

If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna.

Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use.

10. What about children using wireless phones?

The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to radiofrequency energy (RF), the measures described above would apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and the RF source will reduce RF exposure.Some groups sponsored by other national governments have advised that children be discouraged from using wireless phones at all. For example, the government in the United Kingdom distributed leaflets containing such a recommendation in December 2000. They


135


3200.ENv1_9310067.book Page 136 Thursday, September 18, 2003 8:42 AM noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists.

11. What about wireless phone interference with medical equipment?

Radiofrequency energy (RF) from wireless phones can interact with some electronic devices. For this reason, FDA helped develop a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac pacemakers and defibrillators from wireless telephones. This test method is now part of a standard sponsored by the Association for the Advancement of Medical instrumentation (AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and many other groups, was completed in late 2000. This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI.

FDA has tested hearing aids for interference from handheld wireless phones and helped develop a voluntary standard sponsored by the Institute of Electrical and

Electronic Engineers (IEEE). This standard specifies test methods and performance requirements for hearing aids and wireless phones so that no interference occurs when a person uses a compatible phone and a accompanied hearing aid at the same time. This standard was approved by the IEEE in 2000.

FDA continues to monitor the use of wireless phones for possible interactions with other medical devices. Should harmful interference be found to occur, FDA will conduct testing to assess the interference and work to resolve the problem.

12. Where can I find additional information?

For additional information, please refer to the following resources:

• FDA web page on wireless phones http://www.fda.gov/cdrh/phones/index.html

• Federal Communications Commission (FCC) RF Safety Program http://www.fcc.gov/oet/rfsafety

• International Commission on Non-Ionizing Radiation Protection http://www.icnirp.de

• World Health Organization (WHO) International EMF Project http://www.who.int/emf

• National Radiological Protection Board (UK) http://www.nrpb.org.uk/

July 18, 2001 For updates: http://www.fda.gov/cdrh/phones



Index

Numerics

1-touch dialing

. . . . . . . . . . . 54

, 67

A access codes

PIN

. . . . . . . . . . . . . . . . . . . . . . . 23

PIN2

. . . . . . . . . . . . . . . . . . . . . . 28

PUK

. . . . . . . . . . . . . . . . . . . . . . 28 security

. . . . . . . . . . . . . . . . . . . 27

access the Internet

. . . . . . . . . . . 93

activate call forwarding

. . . . . . 65

adjust

earpiece volume . . . . . . . . . . . . . 18 ringing volume

. . . . . . . . . . . . . . 57

alarm clock

. . . . . . . . . . . . . . . . . . 81

answer a call

. . . . . . . . . . . . . . . . 18

antenna

. . . . . . . . . . . . . . . . . . . . . 16

anykey answer

. . . . . . . . . . . . . . . 66

applications

. . . . . . . . . . . . . . 88 – 91

automatic

redial

. . . . . . . . . . . . . . . . . . . . . 67 volume control . . . . . . . . . . . . . . 66

B battery

about . . . . . . . . . . . . . . . . . . . . 114 recharge

. . . . . . . . . . . . . . . . . . 112

bookmarks

. . . . . . . . . . . . . . . . . . 94

brightness

. . . . . . . . . . . . . . . . . . . 60

business cards

. . . . . . . . . . . . . . . 53

C calculator

. . . . . . . . . . . . . . . . . . . 86

calendar

. . . . . . . . . . . . . . . . . 82

–

85

call

duration

. . . . . . . . . . . . . . . . . . . 48 forwarding . . . . . . . . . . . . . . . . . 65 lists, delete

. . . . . . . . . . . . . . . . 48 log . . . . . . . . . . . . . . . . . . . . 46 – 48 restriction

. . . . . . . . . . . . . . . . . 23


137 times

. . . . . . . . . . . . . . . . . . . . . . 48 waiting

. . . . . . . . . . . . . . . . . . . . 67

caller

groups

. . . . . . . . . . . . . . . . . . . . . 55

ID

. . . . . . . . . . . . . . . . . . . . . . . . 67

calls

answer

. . . . . . . . . . . . . . . . . . . . 18 emergency

. . . . . . . . . . . . . . . . . 97 make

. . . . . . . . . . . . . . . . . . . . . . 17 reject

. . . . . . . . . . . . . . . . . . . . . 18

camera

. . . . . . . . . . . . . . . . . . . . . . 76

cancel call forwarding

. . . . . . . . 66

cell info display

. . . . . . . . . . . . . . 68

chat

. . . . . . . . . . . . . . . . . . . .104

–

106

clock radio

. . . . . . . . . . . . . . . . . . . 81

clock, set

. . . . . . . . . . . . . . . . . . . . 16

closed user groups

. . . . . . . . . . . . 26

color scheme

. . . . . . . . . . . . . . . . . 59

conference calls

. . . . . . . . . . . . . . 17

connection ports

. . . . . . . . . . . . 112

connectivity

. . . . . . . . . . . . . . 63

–

65

contacts

. . . . . . . . . . . . . . . . . . 49

–

56

1-touch dialing

. . . . . . . . . . . . . . 54 add image

. . . . . . . . . . . . . . . . . . 52 business cards

. . . . . . . . . . . . . . 53 call from

. . . . . . . . . . . . . . . . . . . 52 caller groups

. . . . . . . . . . . . . . . . 55 copy

. . . . . . . . . . . . . . . . . . . . . . 53 delete

. . . . . . . . . . . . . . . . . . . . . 52 find entry

. . . . . . . . . . . . . . . . . . 51 info numbers

. . . . . . . . . . . . . . . 55 memory

. . . . . . . . . . . . . . . . . . . 56 menu options

. . . . . . . . . . . . . . . 49 own numbers

. . . . . . . . . . . . . . . 55 save

. . . . . . . . . . . . . . . . . . . . . . 50 search

. . . . . . . . . . . . . . . . . . . . . 51 select view

. . . . . . . . . . . . . . . . . 56 service numbers

. . . . . . . . . . . . . 55

currency conversion

. . . . . . . . . . 86

customer care

. . . . . . . . . . . . . . . . . 8

customize profile

. . . . . . . . . . . . . 57



D date settings

. . . . . . . . . . . . . . . . . 61

delete

1-touch dialing entry

. . . . . . . . . 55 call lists

. . . . . . . . . . . . . . . . . . . 48 contact entry

. . . . . . . . . . . . . . . 52 fixed dialing entry

. . . . . . . . . . . 25 messages

. . . . . . . . . . . . . . . . . . 33

dialed numbers, view

. . . . . . . . . 47

dictionary

. . . . . . . . . . . . . . . . . . . 21

display

brightness

. . . . . . . . . . . . . . . . . . 60 language . . . . . . . . . . . . . . . . . . 68 settings

. . . . . . . . . . . . . . . . . . . 58

download

applications

. . . . . . . . . . . . . . . . 90 games

. . . . . . . . . . . . . . . . . . . . . 89

duration of calls

. . . . . . . . . . . . . 48

E e-mail

. . . . . . . . . . . . . . . . . . . . . . . 40

emergency calls while online

. . 97

F fixed dialing

. . . . . . . . . . . . . . 24

–

26

flashlight

. . . . . . . . . . . . . . . . . . . . . 4

folders

gallery

. . . . . . . . . . . . . . . . . . . . 73 message

. . . . . . . . . . . . . . . . . . . 32

forward messages

. . . . . . . . . . . . 37

G gallery

. . . . . . . . . . . . . . . . . . . 73

– 75

games

. . . . . . . . . . . . . . . . . . . . 88

– 89

Go to menu

. . . . . . . . . . . . . . . . . 100

GPRS connectivity

. . . . . . . . . . . . 64

H help text

. . . . . . . . . . . . . . . . . . . . 70

I images

add to contacts

. . . . . . . . . . . . . 52 edit in gallery

. . . . . . . . . . . . . . . 74

138

info

message service

. . . . . . . . . . . . .45

numbers

. . . . . . . . . . . . . . . . . . . 55

infrared connectivity

. . . . . . . . . 63

install SIM card

. . . . . . . . . . 14

–

15

instant messaging

. . . . . . 102

–

111

international calls

. . . . . . . . . . . .17

Internet

access

. . . . . . . . . . . . . . . . . . . . .93

bookmarks

. . . . . . . . . . . . . . . . . . 94 options

. . . . . . . . . . . . . . . . . . . .97

security

. . . . . . . . . . . . . . . . . . . .98

Internet service

. . . . . . . . . . . 92

–

99

K keyguard

. . . . . . . . . . . . . . . . . . . . .23

L language

. . . . . . . . . . . . . . . . . . . . .68

lock the keypad

. . . . . . . . . . . . . . 23

M make a call

. . . . . . . . . . . . . . . . . .17

media

. . . . . . . . . . . . . . . . . . . . 76

–

80

menus

. . . . . . . . . . . . . . . . . . . . . . .12

message alert tone

. . . . . . . . . . .57

messages

default type

. . . . . . . . . . . . . . . . . 31 delete

. . . . . . . . . . . . . . . . . . . . .33

e-mail

. . . . . . . . . . . . . . . . . . . . .40

folders

. . . . . . . . . . . . . . . . . . . . .32

forward

. . . . . . . . . . . . . . . . . . . .37

icons

. . . . . . . . . . . . . . . . . . . . . . 30 info message service

. . . . . . . . . .45

instant

. . . . . . . . . . . . . . . 102

– 111 linked

. . . . . . . . . . . . . . . . . . . . .29

multimedia

. . . . . . . . . . . . . .40

–43 options

. . . . . . . . . . . . . . . . . . . .30

picture

. . . . . . . . . . . . . . . . . 38

– 39 read

. . . . . . . . . . . . . . . . . . . . . . .36

reply

. . . . . . . . . . . . . . . . . . . . . .37

send

. . . . . . . . . . . . 36

,

39

,

40

,

41


3200.ENv1_9310067.book Page 139 Thursday, September 18, 2003 8:42 AM service commands

. . . . . . . . . . . 45 settings

. . . . . . . . . . . . . . . . 34

– 36 text

. . . . . . . . . . . . . . . . . . . . . . 36 voice

. . . . . . . . . . . . . . . . . . 43

– 45

missed calls, view

. . . . . . . . . . . . 47

multimedia

messages

. . . . . . . . . . . . . . . 40

–43

music stand

. . . . . . . . . . . . . . . . . 71

N

Nokia PC Suite

. . . . . . . . . . . . . . 12

notes, calendar

. . . . . . . . . . . 83

– 85

O operator logo

. . . . . . . . . . . . . . . . 59

organizer

. . . . . . . . . . . . . . . . . 81

– 87 alarm clock

. . . . . . . . . . . . . . . . 81 calculator

. . . . . . . . . . . . . . . . . . 86 calendar

. . . . . . . . . . . . . . . . . . . 82

OTA settings

. . . . . . . . . . . . . . . . . 57

over the air settings

. . . . . . . . . . 57

own numbers

. . . . . . . . . . . . . . . . 55

P

PC Suite

. . . . . . . . . . . . . . . . . . . . . 12

personal shortcuts

. . . . . . . . . . . 61

phone

memory

. . . . . . . . . . . . . . . . . . . 68 security

. . . . . . . . . . . . . . . . 23

– 28

picture messages

. . . . . . . . . . 38

–

39

predictive text

. . . . . . . . . . . . 21

–

22

profiles

. . . . . . . . . . . . . . . . . . 57

–

58 customize

. . . . . . . . . . . . . . . . . 57 select

. . . . . . . . . . . . . . . . . . . . . 57 timed

. . . . . . . . . . . . . . . . . . . . . 58

punctuation

. . . . . . . . . . . . . . . . . 22

Q quick keys

. . . . . . . . . . . . . . . . . . . 10

R radio

. . . . . . . . . . . . . . . . . . . . . . . . 78

read messages

. . . . . . . . . . . . . . . 36


139

receive e-mail

. . . . . . . . . . . . . . . 36

received calls, view

. . . . . . . . . . . 47

recharge the battery

. . . . . . . . 112

recorder, voice

. . . . . . . . . . . . 79

–

80

redial a number

. . . . . . . . . . . . . . 17

registration

. . . . . . . . . . . . . . . . . . . 7

reject a call

. . . . . . . . . . . . . . . . . . 18

reply to messages

. . . . . . . . . . . . 37

restore factory settings

. . . . . . . 72

ringing tone

. . . . . . . . . . . . . . . . . 57

S safety

. . . . . . . . . . . . . . . . . . . . . . . . 1

screen saver

. . . . . . . . . . . . . . . . . 59

security

Internet

. . . . . . . . . . . . . . . . . . . 98 phone

. . . . . . . . . . . . . . . . . . 23

– 28

select profile

. . . . . . . . . . . . . . . . . 57

self-timer

. . . . . . . . . . . . . . . . . . . 77

send

business card

. . . . . . . . . . . . . . . 53 caller ID

. . . . . . . . . . . . . . . . . . . 67 e-mail

. . . . . . . . . . . . . . . . . . . . . 40 instant messages

. . . . . . . . . . . 104 multimedia messages

. . . . . . . . . 41 picture messages

. . . . . . . . . . . . 39 text messages

. . . . . . . . . . . . . . . 36

service

commands

. . . . . . . . . . . . . . . . . 45 numbers

. . . . . . . . . . . . . . . . . . . 55

services

. . . . . . . . . . . . . . . . . . . 92

– 99

set

alarm clock

. . . . . . . . . . . . . . . . . 81 clock

. . . . . . . . . . . . . . . . . . . . . . 16 date

. . . . . . . . . . . . . . . . . . . . . . 61 radio channel

. . . . . . . . . . . . . . . 78

settings

. . . . . . . . . . . . . . . . . . . 57

– 72 anykey answer

. . . . . . . . . . . . . . 66 automatic redial

. . . . . . . . . . . . . 67 call forwarding

. . . . . . . . . . . . . . 65 call waiting

. . . . . . . . . . . . . . . . . 67


3200.ENv1_9310067IX.fm Page 140 Thursday, September 18, 2003 8:59 AM camera

. . . . . . . . . . . . . . . . . . . . 77 cell info display

. . . . . . . . . . . . . 68 color scheme

. . . . . . . . . . . . . . . 59 display

. . . . . . . . . . . . . . . . . 58

– 60 display brightness

. . . . . . . . . . . . 60 display language

. . . . . . . . . . . . 68 enhancements

. . . . . . . . . . . . . . 70 help text

. . . . . . . . . . . . . . . . . . . 70 language

. . . . . . . . . . . . . . . . . . 68 line for outgoing calls

. . . . . . . . 67

OTA

. . . . . . . . . . . . . . . . . . . . . . . 57 personal shortcuts

. . . . . . . . . . . 61 phone

. . . . . . . . . . . . . . . . . . 68

–

70 phone memory

. . . . . . . . . . . . . . 68 profiles

. . . . . . . . . . . . . . . . . 57

–

58 restore factory settings

. . . . . . . 72 screen saver

. . . . . . . . . . . . . . . . 59 security

. . . . . . . . . . . . . . . . . . . . 71 send caller ID

. . . . . . . . . . . . . . . 67 start-up tone

. . . . . . . . . . . . . . . 70 summary after call

. . . . . . . . . . . 67 time and date

. . . . . . . . . . . . . . . 60 tone

. . . . . . . . . . . . . . . . . . . . . . 58 wallpaper

. . . . . . . . . . . . . . . . . . 58 welcome note

. . . . . . . . . . . . . . . 69

shared memory

. . . . . . . . . . . . . . . 3

shortcuts

SIM

personal

. . . . . . . . . . . . . . . . . . . 61 card, install

. . . . . . . . . . . . . . 14

–

15 services

. . . . . . . . . . . . . . . . . . . 101

special characters

. . . . . . . . . . . . 22

start screen

. . . . . . . . . . . . . . . . . . 10

start-up tone

. . . . . . . . . . . . . . . . 70

summary after call

. . . . . . . . . . . 67

T take a photo

. . . . . . . . . . . . . . . . .76

text

entry

. . . . . . . . . . . . . . . . . . 20

– 22 messages

. . . . . . . . . . . . . . . . . . .36

predictive

. . . . . . . . . . . . . . 21

– 22

time settings

. . . . . . . . . . . . . . . . . 60

timed profile

. . . . . . . . . . . . . . . . . 58

tones

. . . . . . . . . . . . . . . . . . . . . . . . 57

turn off alarm clock

. . . . . . . . . . 82

U unlock the keypad

. . . . . . . . . . . . 23

V vibrating alert

. . . . . . . . . . . . . . . .57

view

call duration

. . . . . . . . . . . . . . . .48

call times

. . . . . . . . . . . . . . . . . .48

dialed numbers

. . . . . . . . . . . . . .47

missed calls

. . . . . . . . . . . . . . . . . 47 received calls

. . . . . . . . . . . . . . . .47

voice

mail

. . . . . . . . . . . . . . . . . . . 43

– 45 recorder

. . . . . . . . . . . . . . . . 79

–

80

volume

control, automatic

. . . . . . . . . . .66

earpiece

. . . . . . . . . . . . . . . . . . . .18

ringing tone

. . . . . . . . . . . . . . . .57

W wallpaper

. . . . . . . . . . . . . . . . . . . .58

warranty

. . . . . . . . . . . . . . . . . . . .123

welcome note

. . . . . . . . . . . . . . . .69

Para obtener un manual del usuario en español favor de llamar o enviar un fax al teléfono 1-888-NOKIA-2U, fax 813-249-9619.


09/03

No results