advertisement
3200.ENv1_9310067.book Page 54 Thursday, September 18, 2003 8:42 AM
2
To send the business card using IR, make sure the receiving device is set up to receive data using its IR port and select Via infrared.
OR
To send the business card as a message, select Via text message.
If you are sending the business card using IR, the phone makes the IR connection and sends the business card. If you are sending the business card as a text message, continue to the next step.
3
Enter the number for your recipient or select Find to retrieve a number from contacts.
4
Select OK.
The business card is sent.
• 1
-
TOUCH DIALING
You can associate any entry in contacts with a key from 2–9, and dial those entries by pressing and holding the assigned key.
Assign a key
1
At the start screen, select Contacts > 1-touch dialing.
2
Scroll to any empty slot and select Assign.
3
Enter the number (including the area code) and select OK, or select Find to retrieve a number from contacts.
4
Enter a name for the number and select OK.
If 1-touch dialing is off, the phone displays a prompt asking if you would like to turn 1-touch dialing on.
5
Select Yes to activate 1-touch dialing.
The entry appears in the slot you have assigned.
Make a call
Press and hold the key to which an entry has been assigned. Your phone dials the entry assigned to the key.
Change numbers
1
At the start screen, select Contacts > 1-touch dialing.
2
Scroll to the 1-touch dialing entry you wish to change and select Options >
Change.
3
Enter the new number, or select Find to retrieve a number from contacts, and select OK.
4
Enter a name for the entry and select OK.
54 Copyright © Nokia 2003
advertisement