advertisement
00743A V8600_eng2 3/11/05 2:16 PM Page 29
C h a p t e r 4
D V D O P E R AT I O N S
Playing a Disc
Before Play
- Turn on your TV and set it to the correct Video Input on your TV's remote control.
- If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
Playback
1
Press the OPEN/CLOSE ( ) button.
2
Place a disc gently into the tray with the disc’s label facing up.
3
Press the (Play/Pause) button on your remote control or on the front panel.
Most discs will start to play back as soon as the tray closes.
4
Stopping Play
Press the (Stop) button during play.
ENG-29
Stop/Resume
- Press the (Stop) button once to stop playback. To resume the
DVD/CD from the point where the disc stopped, press the
(Play/Pause) button.
- Press the (Stop) button twice to completely stop playback. The next time you press the (Play/Pause), the disc will start over from the beginning.
00743A V8600_eng2 3/11/05 2:17 PM Page 30
D V D O P E R AT I O N S
5
Pausing Play
Press the (Play/Pause) button on your remote control or on the front panel during play.
6
Step Motion Play (Except CD)
Press the F.ADV button on the remote control during play.
7
Slow Motion Play (Except CD)
Press and hold the (Forward) button to choose the play speed between 1/8, 1/4 and 1/2 of normal during PAUSE or STEP mode.
8
To remove the Disc
Press the OPEN/CLOSE ( ) button.
- Screen stops, no sound.
- To resume, press the
(Play/Pause) button once again.
Note
If the player is left for about 5 minutes in pause mode, it will stop.
- Each time the button is pressed, a new frame will appear.
- No sound is heard during STEP mode.
- Press the (Play/Pause) button to resume normal play.
- You can only perform step motion play in the forward direction.
- No sound is heard during slow mode.
- Press the (Play/Pause) button to resume normal play.
- Reverse slow motion play will not work.
Note
This ( ) icon indicates an invalid button press.
ENG-30
advertisement