Using the Tape Counter. Samsung DVD-V8600

00743A V8600_eng3 3/11/05 2:18 PM Page 70

V C R O P E R AT I O N S

Using the Tape Counter

The tape counter:

- Indicates the elapsed time in the play and record modes (hours, minutes and seconds).

- Is reset when a cassette is inserted in the DVD-VCR.

- Allows you to easily find the beginning of a sequence.

- If the remaining time is to be calculated correctly, you must indicate the type of cassette being used.

1

Insert a cassette in your DVD-

VCR. To set the tape counter to zero at the beginning of a sequence:

- Press the INFO. button twice to display the counter

- Press the CLEAR button when you want to set the tape counter to zero.

2

When you are ready,

- Start playback or Recording.

- Press the (Stop) button.

- To fast-forward or rewind to the sequence at which the counter was set to zero, press the the (Forward) or

(Rewind) button.

- Some DVD-VCR information, such as the counter, can be displayed on the television screen.

Press the INFO. button:

- Once to display the current function, recording speed and counter.

- Twice to display the counter only.

- Three times to display the time remaining on the cassette.

- Four times to clear the display.

ENG-70