advertisement
00743A V8600_eng3 3/11/05 2:18 PM Page 73
V C R O P E R AT I O N S
Searching for a Specific Sequence
Each time you record a cassette on this DVD-VCR, an “index” is automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a specific index and start playback from that point.
Depending on the direction selected, the indexes are numbered as follows: etc.
Prev
Seq.
Seq. being played
Next
Seq. etc.
2 1 1 2
This DVD-VCR uses a standard indexing system (VISS). As a result, it will recognize any indexes marked by other VCRs using the same system and vice versa.
1
Press the MENU button on the remote control.
2
Press the …/† buttons to select Function, then press the √ or ENTER button.
3
Press the …/† buttons to select VCR Function, then press the √ or ENTER button.
VCR Function can be displayed simply by pressing the SEARCH button.
4
Press the …/† buttons to select the desired item, then press the √ or ENTER button.
DVD Function
VCR Function
Go to [0:00:000]
End Search
Forward Intro Scan
Reverse Intro Scan
ENG-73
00743A V8600_eng3 3/11/05 2:18 PM Page 74
V C R O P E R AT I O N S
Variable Search System
Go To [0:00:00] Stop
Use this feature when you want to search for the 0:00:00 counter position on a cassette.
Go to [0:00:000]
End Search
Forward Intro Scan
Reverse Intro Scan
Press the CLEAR button at the point on the tape where you want to set the counter to [0:00:00].
The VCR will rewind or fast forward, searching for the
0:00:00 counter position, and then automatically stop at that position.
End Search
Use this feature when you want to search for a blank position to record a program on a cassette.
Go to [0:00:000]
End Search
Forward Intro Scan
Reverse Intro Scan
The VCR will fast forward, searching for a blank position, and then automatically stop at that position.
If the VCR reaches the end of the tape during end search, the tape will be ejected.
Scan and play
Use scan and play when you don’t know exactly where a program is located on a cassette tape.
Go to [0:00:000]
End Search
Forward Intro Scan
Reverse Intro Scan
- Forward Intro Scan
Select “Forward Intro Scan”, then press the ENTER button.
- Reverse Intro Scan
Select “Reverse Intro Scan”, then press the ENTER button.
ENG-74
advertisement