Selecting the Cassette Type. Samsung DVD-V8600

00743A V8600_eng3 3/11/05 2:18 PM Page 67

V C R O P E R AT I O N S

Selecting the Cassette Type

If you wish to use the tape counter to display the time remaining on a cassette, you must indicate the type of cassette inserted.

1

Press the MENU button on the remote control.

2

Press the …/† buttons to select VCR, then press the √ or ENTER button.

3

Press the …/† buttons to select Tape Length, then press the √ or ENTER button to select the correct cassette length.

4

Press the MENU button to exit.

n n

Note

This information is usually printed on the tape box. The menu cycles through: T-120,

T-160 or T-180.

Once the type of cassette is set, the VCR can display the amount of time remaining on the tape when you press the INFO. button.

ENG-67