advertisement
00743A V8600_eng3 3/11/05 2:18 PM Page 81
C h a p t e r 6
R E F E R E N C E
Using the TV Buttons on the Remote Control
Your DVD-VCR remote control will work with Samsung televisions and compatible brands.
To determine whether your television is compatible, follow the instructions below.
1 Switch your television on.
2 Point the remote control towards the television.
3 Hold down the TV button and enter the two-figure code corresponding to the brand of your television, by pressing the appropriate numeric buttons.
BRAND
SAMSUNG
DAEWOO
EMERSON
HITACHI
LG
LOEWE
MAGNAVOX
NEWSAN
NOBLEX
PANASONIC
RCA
SANYO
SHARP
SONY
TELEFUNKEN
TOSHIBA
ZENITH
01, 14, 15, 23
19
21
10
06, 08, 18
28
04
27
25
12, 24
07, 29
05, 20
02, 16, 22
03
26
09
17
TV Codes
CODE
Note
If your television is compatible with the remote control, it will switch off. It is now programmed to operate with the remote control.
If several codes are indicated for your television brand, try each one in turn until you find one that works.
You can then control the television using the following buttons.
Button Function
POWER
INPUT SEL.
Used to switch the television on and off.
Used to select an external source.
VOL + or – Used to adjust the volume of the television.
CH ( or ) Used to select the required channel.
TV MUTE Used to toggle the sound on and off.
The various functions will not necessarily work on all televisions. If you encounter problems, operate the television directly.
ENG-81
advertisement