Selecting the Audio Output Mode. Samsung DVD-V8600

00743A V8600_eng3 3/11/05 2:18 PM Page 72

V C R O P E R AT I O N S

6

Select the source from which you wish to record by pressing:

- The CH or buttons television channel.

- The INPUT SEL. button for the LINE1 or LINE2 input source.

7

Press the REC button to start recording. When you have finished recording, press the

(Stop) button.

Selecting the Audio Output Mode

You can select the mode in which the sound is reproduced on the loudspeakers and AV outputs.

The following options are available.

Press the AUDIO button on the remote control until the required option is displayed.

Audio output mode

- Left: Used to listen to the sound on the left Hi-Fi channel.

- Right: Used to listen to the sound on the right Hi-Fi channel.

- Mono: Used to listen to the sound on the normal mono channel.

- Hi-Fi: Used to listen to Hi-Fi stereo sound on the left and right channels. When playing back tapes recorded in

Hi-Fi, the sound switches to Hi-Fi after five seconds of

Mono.

ENG-72