advertisement
ENERCON E-40 Operating Instructions
Page 72 of 96
Figure 23: Turbine comparison of daily yield
7.3.3 Substation (optional)
Provided the substation is monitored under an power / voltage control system (see
7.2), the following data can be displayed or calculated:
Parameter main status, sub-status energy generated active power reactive power (not yet available) voltage L1 voltage L2 voltage L3
Unit
kWh kW kVA kV kV kV
Value calculated availability accumulated average, peak average, peak average, peak average, peak average, peak
7.3.4 Meteorological stations (optional)
Where an additional meteorological station (wind measuring mast) has been installed and is monitored (see 7.2), the parameters listed in the following table can be recorded. The calculation intervals are permanent (online), minutely, 10minutely, daily, weekly, monthly and yearly.
Remote monitoring
advertisement
