3-2. Using the multimedia system
USB port/AUX port
Connect an iPod, USB memory device or portable audio player to the
USB port/AUX port as indicated below. Select “iPod”, “USB” or
“AUX” on the “Select Audio Source” screen and the device can be operated via multimedia system.
Connecting using the USB port/AUX port
■ iPod
Open the cover and connect an iPod using an iPod cable.
Turn on the power of the iPod if it is not turned on.
3
■
USB memory
Open the cover and connect the USB memory device.
Turn on the power of the USB memory device if it is not turned on.
■
Portable audio player
Open the cover and connect the portable audio player.
Turn on the power of the portable audio player if it is not turned on.
CAUTION
■ While driving
Do not connect a device or operate the device controls.
249
3-2. Using the multimedia system
Setup menu
You can adjust the multimedia system to your desired settings.
Display “Setup” screen
Press the “SETUP” button to display the “Setup” screen.
Select to adjust the settings for operation sounds, screen animation, etc. (
P. 251)
Select to set the voice settings. (
P. 255)
Select to adjust the settings for contrast and brightness of the screen. (
P. 254)
Select to adjust the settings for registering, removing, connecting and disconnecting
Bluetooth
®
devices. (
P. 291)
Select to adjust the settings for phone sound, contact, etc.
(
P. 320)
Select to set audio settings.
(
P. 253)
Select to turn the screen off.
250
3-2. Using the multimedia system
General settings
Settings are available for adjusting the operation sounds, screen animation, etc.
■ Screen for general settings
Press the “SETUP” button.
Select “General” on the “Setup” screen.
Select to adjust the clock.
(
P. 252)
“English”, “Français” or
“Español” can be selected.
On/off can be selected to sound beeps.
Select to change the screen color.
Select to change the keyboard layout.
The animation effect for the screen can be set to on/off.
Select to delete personal data
(
P. 252)
Select to update program versions. For details, contact your
Toyota dealer.
Select to display the software information. Notices related to third party software used in this product are enlisted. (This includes instructions for obtaining such software, where applicable.)
3
251
3-2. Using the multimedia system
■
Setting the clock
Select “Clock” on the “General Settings” screen.
Adjust the time, then select “OK”.
■
Delete personal data
Select “Delete Personal Data” on the “General Settings” screen.
Select “Delete”.
Check carefully beforehand, as data cannot be retrieved once deleted.
A confirmation screen will be displayed. Select “Yes”.
The following personal data will be deleted or changed to its default settings.
• General settings
• Audio settings
• Phone settings
■ To return to the default settings
Select “Default”, and then “Yes”.
252
3-2. Using the multimedia system
Audio settings
Settings are available for adjusting the radio operation, cover art, etc.
■ Screen for audio settings
Press the “SETUP” button.
Select “Audio” on the “Setup” screen.
Select the number of radio preset stations.
Select to display the cover art
Select “High”, “Middle”, “Low” or “Off”.
3
■
About Automatic Sound Leveliser (ASL)
ASL automatically adjusts the volume and tone quality according to the vehicle speed.
253
3-2. Using the multimedia system
Display settings
Settings are available for adjusting the contrast and brightness of the screen.
■ Screen for display settings
Press the “SETUP” button.
Select “Display” on the “Setup” screen.
Adjust general screen contrast/brightness
Adjust camera screen contrast/brightness
Changes to day mode.
■ Adjusting the screen contrast/brightness
Select “General” or “Camera” on the “Display Settings” screen.
Adjust the display as desired by selecting “+” or “-”.
■ Day mode
When the headlights are turned on, the screen dims.
However, the screen can be switched to day mode by selecting
“Day Mode”.
The screen will stay in day mode when the headlights are turned on until
“Day Mode” is selected again.
254
