3-2. Using the multimedia system
Registering and connecting from the “Bluetooth Setup” screen
To display the screen shown below, press the “SETUP” button and select “Bluetooth” on the “Setup” screen.
Select to connect the device to be used with multimedia system. (
P. 288)
Select to register a Bluetooth
® device to be used with multimedia system. (
P. 286)
Select to set detailed
Bluetooth
®
system settings.
(
P. 291)
Select to delete registered devices. (
P. 287)
284
3-2. Using the multimedia system
Registering a Bluetooth
®
audio player for the first time
To use the Bluetooth
®
Audio, it is necessary to register an audio player with the system.
Once the player has been registered, it is possible to use the
Bluetooth
®
Audio.
This operation cannot be performed while driving.
For details about registering a Bluetooth
®
device (
P. 286)
Turn the Bluetooth
®
connection setting of your audio player on.
This function is not available when the Bluetooth
®
connection setting of your audio player is set to off.
Press the “AUDIO” button.
Select “ Audio” on the “Select Audio Source” screen.
Select “Select Device”.
Follow the steps in “How to register a Bluetooth
®
device” from
“STEP 2”. (
P. 286)
3
Registering a Bluetooth
®
phone for the first time
To use the hands-free system, it is necessary to register a Bluetooth
® phone with the system.
Once the phone has been registered, it is possible to use the handsfree system.
For details about registering a Bluetooth
®
device (
P. 286)
Turn the Bluetooth
®
connection setting of your cellular phone on.
Press the button.
Select “OK” to register a phone.
Follow the steps in “How to register a Bluetooth
®
device” from
“STEP 2”. (
P. 286)
285
3-2. Using the multimedia system
Registering a Bluetooth
®
device
Bluetooth
®
compatible phones (HFP) and portable audio players
(AVP) can be registered simultaneously. You can register up to 5
Bluetooth
®
devices.
■
How to register a Bluetooth
®
device
Display the “Bluetooth Setup” screen. (
P. 284)
Select “Add”.
When this screen is displayed, search for the device name displayed on this screen on the screen of your Bluetooth
® device.
For details about operating the
Bluetooth
®
device, see the manual that comes with it.
To cancel the registration, select
“Cancel”.
Register the Bluetooth
®
device using your Bluetooth
®
device.
A PIN-code is not required for SSP (Secure Simple Pairing) compatible Bluetooth
®
devices. Depending on the type of Bluetooth
®
device being connected, a message confirming registration may be displayed on the Bluetooth
®
device’s screen. Respond and operate the
Bluetooth
®
device according to the confirmation message.
Check that this screen is displayed when registration is complete.
286