3-2. Using the multimedia system
■
Calling the message sender
Calls can be made to an e-mail/SMS/MMS message sender’s phone number.
Display the “Message Inbox” screen. (
P. 315)
Select the desired message.
Select .
Check that the “Call” screen is displayed.
● Calling from a number within a message
Calls can be made to a number identified in a message’s text area.
Display the “Message Inbox” screen. (
P. 315)
Select the desired message.
Select the text area.
Select corresponding to the desired number.
Check that the “Call” screen is displayed.
● Calling from the incoming message screen
P. 314
318
3-2. Using the multimedia system
Using the steering wheel switches (if equipped)
The steering wheel switches can be used to operate a connected cellular phone.
■ Operating a telephone using the steering wheel switches
Off hook switch
• Make a call
• Receive a call
• Display “Phone” screen
On hook switch
• End a call
• Refuse a call 3
319
3-2. Using the multimedia system
Bluetooth
®
phone settings
You can adjust the hands-free system to your desired settings.
■ “Phone/Message Settings” screen
To display the screen shown below, press the “SETUP” button, and select “Phone” on the “Setup” screen.
Set the phone connection
(
P. 286)
Sound Settings (
P. 320)
Contact/Call History Settings
(
P. 322)
Messaging Settings (
P. 329)
Phone Display Settings
(
P. 331)
■ Sound setting
Display the “Phone/Message Settings” screen. (
P. 320)
Select “Sound Settings” on the “Phone/Message Settings” screen.
Set the desired ringtone.
Adjust the ringtone volume.
Adjust the message readout volume.
Set the desired incoming
SMS/MMS tone.
Adjust the incoming SMS/
MMS tone volume.
Set the incoming e-mail tone.
Adjust the incoming e-mail tone volume.
Adjust the default volume of the other party’s voice.
320
■ To return to the default settings
Select “Default”, and then “Yes”.
3-2. Using the multimedia system
3
321
3-2. Using the multimedia system
Contact/Call history settings
The contact can be transferred from a Bluetooth
®
phone to the system. The contact also can be added, edited and deleted.
322
The call history can be deleted and contact and favorites can be changed.
Display the “Phone/Message Settings” screen. (
P. 320)
Select “Contact/Call History Settings”.
Select the desired item to be set.
For PBAP compatible
Bluetooth
®
phones, select to set automatic contact/history transfer on/off. When set to on, the phone’s contact data and history are automatically transferred.
Select to update contacts from the connected phone.
(
P. 323)
Select to sort contacts by the first name or last name field.
Select to add contacts to the favorites list. (
P. 327)
Select to delete contacts from the favorites list. (
P. 328)
Select to display contact images.
Select to clear contacts from the call history.
Select to add new contacts to the contact list.
* (
P. 325)
Select to edit contacts in the contact list.
* (
P. 325)
3-2. Using the multimedia system
Select to delete contacts from the contact list.
* (
P. 326)
Select to reset all setup items.
*
* : For PBAP compatible Bluetooth
® phones only, this function is available when “Automatic Contact/
History Transfer” is set to off.
(
P. 322)
■
Update contacts from phone
Operation methods differ between PBAP compatible and PBAP incompatible but OPP compatible Bluetooth
®
phones.
If your cellular phone is neither PBAP nor OPP compatible, the contacts cannot be transferred.
● For PBAP Compatible Bluetooth ®
Phones
Select “Update Contacts from Phone”.
Check that a confirmation screen is displayed when the operation is complete.
This operation may be unnecessary depending on the type of cellular phone.
Depending on the type of cellular phone, OBEX authentication may be required when transferring contact data. Enter “1234” into the
Bluetooth
®
phone.
If another Bluetooth
®
device is connected when transferring contact data, depending on the phone, the connected Bluetooth
®
device may need to be disconnected.
Depending on the type of Bluetooth
®
phone being connected, it may be necessary to perform additional steps on the phone.
3
323
3-2. Using the multimedia system
● For PBAP Incompatible Bluetooth ®
Phones
Select “Update Contacts from Phone”.
Transfer the contact data to the system using a Bluetooth
® phone.
This operation may be unnecessary depending on the type of cellular phone.
Depending on the type of cellular phone, OBEX authentication may be required when transferring contact data. Enter “1234” into the
Bluetooth
®
phone.
To cancel this function, select “Cancel”.
Select “Done” when it appears on the screen.
Check that a confirmation screen is displayed when the operation is complete.
● Updating the contacts in a different way (From the “Call History” screen)
For PBAP compatible Bluetooth
®
phones, this function is available when “Automatic Contact/History Transfer” is set to off. (
P. 322)
Display the phone screen. (
P. 305)
Select the “Call History” tab and select a contact not yet registered in the contact list.
Select “Update Contact”.
Select the desired contact.
Select a phone type for the phone number.
324
3-2. Using the multimedia system
■
Registering a new contact to the contact list
New contact data can be registered. Up to 4 numbers per person can be registered. For PBAP compatible Bluetooth
®
phones, this function is available when “Automatic Contact/History Transfer” is set to off. (
P. 322)
Select “New Contact”.
Enter the name and select “OK”.
Enter the phone number and select “OK”.
Select the phone type for the phone number.
To add another number to this contact, select “Yes”.
● Registering a new contact in a different way (From the “Call History” screen)
Display the phone screen. (
P. 305)
Select the “Call History” tab and select a contact not yet registered in the contact list.
Select “Add to Contacts”.
Follow the steps in “Registering a new contact to the contact list” from “STEP 3”. (
P. 325)
■
Editing the contact data
For PBAP compatible Bluetooth
®
phones, this function is available when “Automatic Contact/History Transfer” is set to off. (
P. 322)
Select “Edit Contact”.
Select the desired contact.
Select corresponding to the desired name or number.
For editing the name
Follow the steps in “Registering a new contact to the contact list” from “STEP 3”. (
P. 325)
For editing the number
Follow the steps in “Registering a new contact to the contact list” from “STEP 4”. (
P. 325)
3
325
3-2. Using the multimedia system
● Editing the contacts in a different way (From the “Contact Details” screen)
Display the phone screen. (
P. 305)
Select the “Contacts”, “Call History” tab or the “Favorites” tab and select the desired contact.
Select “Edit Contact”.
“E-mail Addresses”: Select to display all registered e-mail addresses for the contact.
Follow the steps in “Editing the contact data” from “STEP 4”.
(
P. 325)
■ Deleting the contact data
For PBAP compatible Bluetooth
®
phones, this function is available when “Automatic Contact/History Transfer” is set to off. (
P. 322)
Select “Delete Contacts”.
Select the desired contact and select “Delete”.
Select “Yes” when the confirmation screen appears.
● Deleting the contact in a different way (From the “Contact Details” screen)
Display the phone screen. (
P. 305)
Select the “Contacts”, “Call History” tab or the “Favorites” tab and select the desired contact.
Select “Edit Contact”.
Select “Yes” when the confirmation screen appears.
326
