Installation. Yamaha YAS-108

Yamaha YAS-108 is a front surround system, which offers a wide sound field and powerful bass sound. With its stylish design, it fits well with TVs or other interior. Experience clear and impactful sound that will draw you more deeply into your movies, music, and TV shows.

PREPARATION

Installation

Installing the unit on a TV stand, etc.

Position the unit with the touch panel facing up on a TV stand, etc.

NOTICE

▪ Do not stack the unit and a BD/DVD player or other device directly on each other. Doing so may cause a malfunction due to vibrations.

▪ Avoid touching, and never place any weight or pressure on the speakers

(portion covered with fabric) on the top of the unit. Doing so may damage the speakers.

▪ The unit contains non-magnetic shielding speakers. Do not place magnetically sensitive items (hard disk drive, etc.) near the unit.

NOTE

The unit can also be mounted on a wall. Some knowledge of building construction is required for safe installation. Please have a qualified contractor or dealer install the unit on a wall. For details, refer to the following:

▪ “Information for qualified contractors or dealers” (p.49)

Remote control sensor

Touch panel

Connecting a TV

Connecting a TV that supports Audio

Return Channel (ARC)

Connect the TV, which supports Audio Return Channel (ARC), to the unit with an HDMI cable (sold separately).

HDMI OUT jack

HDMI input jack

HDMI

(ARC)

The unit (rear) TV

What is Audio Return Channel ( ARC )?

In order for the unit to play audio from a TV, the TV must usually be connected to the unit via an audio cable as well as an HDMI cable. If, however, the TV supports

Audio Return Channel (ARC), TV audio signals can be input to the unit via the

HDMI cable that outputs video signals from the unit to the TV.

NOTE

▪ Connect an HDMI cable to the audio return channel supported jack (the jack with

“ARC” indicated) on TV.

▪ Enable the HDMI control function of the unit to activate the Audio Return Channel

(ARC). For details, see the following:

– “Configuring the HDMI control function” (p.35)

▪ Use a 19-pin HDMI cable with the HDMI logo printed on it. A cable with a maximum length of 5 m (16 ft) is recommended to prevent degradation of signal quality.

▪ Use a premium high-speed HDMI cable for playback of 3D and 4K video content.

▪ The unit supports HDCP version 2.2, a copy protection technology. For playback of 4K video, connect the unit to the HDMI input jack (one compatible with HDCP

2.2) on an HDCP 2.2-compliant TV.

▪ The TV input jack cannot be used when a TV that supports the Audio Return

Channel is connected to the unit.

Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

3D surround sound for a cinematic experience
Clear Voice function for enhanced dialogue clarity
Bass Extension for powerful and deep bass
Bluetooth connectivity for wireless music streaming
HDMI ARC for simplified connection and control
Multipoint connection for simultaneous pairing with two Bluetooth devices

Related manuals

Frequently Answers and Questions

Can I connect my TV to the Yamaha YAS-108?

Yes, you can connect your TV to the Yamaha YAS-108 via HDMI or analog connection.

Does the Yamaha YAS-108 support Bluetooth connectivity?

Yes, the Yamaha YAS-108 supports Bluetooth connectivity for wireless music streaming.

Can I use the Yamaha YAS-108 to enhance the sound quality of my music?

Yes, the Yamaha YAS-108 offers features like 3D surround sound, Clear Voice, and Bass Extension to enhance the sound quality of your music.

Installation. Yamaha YAS-108

PREPARATION