Chapter

1

Before Using This Machine

This chapter contains essential information you should understand such as how to set up the system, the names of the machine parts, etc.

Part Names and Their Functions

Appearance

5

4

6 7 8

9

10

11

3

No.

Name

1 Control panel

2 Waste box

3 Front cover

4 Stacker tray

5 Scale

6 Top cover 3

7 Top cover 2

8 Top cover 1

9 Feed tray

10 USB terminal

11 AC inlet

12 Reject tray

13 Power switch

2 1 13 12

Function

Displays operations and statuses.

Receives pieces of waste paper.

Open to remove pieces of paper in the waste box.

Receives the finished document.

This measures the cut and slit position, and the finish of the document.

Open this to remove the paper jam from the cutter/crease/optional module or to replace the optional module.

Open this to remove the paper jam from the slitter module.

Open this to move the upper guide or to remove the paper jam from the feed unit.

The original document is placed here.

Insert a USB cable here to connect the computer and this machine.

Connect the power cord.

This is where the document comes when it is rejected due to double feed, barcode error, REG. Mark error, etc.

Press to switch the power on and off.

Reference page

14

74

78,82

66,69

—

89 – 94

87,88

75,

85 – 86

70,97

18,31

16

81,99

16,17

11

Part Names and Their Functions

17

16

14 15

No.

Name Function

14 Airflow adjustment knob This adjusts the airflow level.

15 Separator adjustment knob This adjusts the distance between the separator and document.

16 Level adjustment knob This adjusts the elevator height.

17 Skew adjustment wheel This adjusts the feed angle of the document.

Reference page

71

70

70

71

12