Setting Frequent Functions From Computer (“Function Setting”). Duplo DC-645

JOB Creator Settings

Setting Frequent Functions From Computer (“Function Setting”)

This describes the procedures to turn ON/OFF the barcode function, REG. Mark function and other functions.

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Click the [Function Setting] button.

The display to turn ON/OFF the function appears.

Tip

• The current DC-645 settings will appear at this time.

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

If you set to [Enable] on “Reject,” input the number of rejected documents to stop the JOB.

Input “0” or click the [Disable] radio button if DC-645 is not to be stopped regardless of number of rejected documents.

12

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Click the [Enable] radio button for function to turn ON. Click the

[Disable] radio button for functions to turn OFF.

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

If you set to [Enable] on “Apply

Shrinkage,” input the pri-print length and post-print length so the machine can automatically calculate the shrinkage rate and improve the

JOB processing precision.

Use the <Number> key to first input the document length before printing.

Next, input the length of the document after printing.

Continue Page

• • •

49

50

JOB Creator Settings

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

After the setting is completed, click the [OK] button.

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

A display will appear to check whether to download the Function

Setting Displayed contents on the

DC-645.

If it is okay, then click [OK].

If it is not okay, then click [NO]. The screen will return to the [Function Setting] display.