When “FEED JAM” is Displayed. Duplo DC-645

Add to My manuals
106 Pages

advertisement

When “FEED JAM” is Displayed. Duplo DC-645 | Manualzz

When a Paper Jam Has Occurred

When “FEED JAM” is Displayed

If a paper jam has occurred in the feeding area, “FEED JAM” is displayed on the LCD panel and the lamp blinks on the OK monitor.

Remove the jammed document with the following procedure.

––– J 2 –––

FEED JAM

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Press the <JOG> key to eject the jammed documents.

7

C

1

4

2

5

8

0

3

6

9

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Press the <STOP> key to reset the fault logic and clear the message.

7

C

1

4

2

5

8

0

3

6

9

25

If the document cannot be removed with the procedure mentioned above

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Open the top cover 1.

Continue Page

• • •

85

86

When a Paper Jam Has Occurred

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Remove the jammed document using your fingers or the pliers.

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Close the top cover 1.

Press the <STOP> key to reset the fault logic and clear the message.

7

C

1

4

2

5

8

0

3

6

9

advertisement

Key Features

  • Automatic slitting, cutting and creasing
  • Programming for job specifications
  • Barcode-based job recognition
  • CCD sensor for registration mark detection
  • Image drift compensation

Related manuals

Frequently Answers and Questions

How does the DC-645 handle paper sizes and formats?
The DC-645 can be programmed to slit, cut and crease paper to meet the desired format. It handles various sizes within its limitations, which are detailed in the manual.
What are the limitations on the number of cuts, slits and creases?
The machine can perform up to 6 slits, 15 cuts, and 10 creases per document.
Can I use barcodes to control the finishing process?
Yes, the machine uses a CCD sensor to read barcodes that contain job numbers and specifications, which are then used to automatically set up the finishing process.
What is the role of the registration mark?
The optional registration mark allows the DC-645 to detect and compensate for image drift on each sheet, ensuring accurate finishing.