Installing a Paper Roll. Ingenico Tetra Move/5000, Move3500

Installing a Paper Roll

•

Open the paper compartment by lifting the catch located at the rear of the terminal and pull the cover to the rear of the terminal.

Page 16

•

Insert the paper roll in the compartment following the directions shown in the picture

•

Pull the paper up to the top of the terminal

•

Hold the paper and close the lid

•

Press simultaneously on both upper corners of the paper flap, as shown by arrows on picture, until it clips into position

When a new paper roll is inserted, tear off the first length (one complete turn) to avoid printing on the residue of the adhesive tape