Function 40 Waiter Setup. Ingenico Tetra Move/5000, Move3500

Page 66

Function 40 Waiter Setup

A ‘Default Waiter ID’ exists to capture the gratuity amount from each transaction if ‘Gratuity’ is enabled on your terminal. However you may wish to set up individual ‘Waiter IDs’ to record the amount of gratuity each waiter has accrued.

The ‘Waiter Menu’ will allow you to ‘Add, Delete, Print, Change Name, Delete All or Create Defaults.

Press until the ‘System Menu’ is displayed and enter the Function Code 40 as described in ‘Selecting Function Codes’ above.

Add Waiter

Press to setup waiters or press or

to return to the ‘Idle

Prompt’.

Press when you have typed in the waiter’s name. The details will be printed.

The details will be printed before returning to the ‘Waiter Setup

Menu’.

Use or to highlight the required option and then press

to select or to exit.

Start to type in the

‘Waiter’s Name’ as described earlier in this manual. The screen will change to the following:

Repeat for each waiter to be added.

You may set up a maximum of 99 waiter’s names. Press to exit the menu.

Move/3500 User Guide Copyright© 2017 Ingenico