Setting the Clock. Philips VRX442, VRX462, VCR 462

Automatic PBS Channel Selection

1

Press the VCR button, then press the MENU button.

2

Press the Number 5 button to select SET CLOCK. CABLE

BOX USERS SET CLOCK MANUALLY will appear on-screen briefly. Then, the menu shown below will appear. (If AUTO

CLOCK is set to OFF, SET TIME ZONE will not be available.)

SET CLOCK

1 AUTO CLOCK (ON)

2 DAYLIGHT SAV TIME (ON)

3 SET MANUAL CLOCK (OFF)

4 SET TIME ZONE

(AUTO)

TO SELECT PUSH NO. SHOWN

TO END PUSH EXIT

3

If (ON) appears to the right of AUTO CLOCK, press the

Number 1 button twice. If (OFF) appears to the right of

AUTO CLOCK, press the Number 1 button once.

AUTO CLOCK

AUTO CLOCK USES

PBS CHANNEL DATA

1 SET PBS CH. AUTO

2 SET PBS CH. MANUAL

TO SELECT PUSH NO. SHOWN

TO END PUSH EXIT

4

Press the Number 1 button to select SET PBS CH.

AUTO to have the VCR find the PBS channel from which to take the time.

5

The Time Zone selection menu will appear. Press one Number button to enter the single-digit code for your Time Zone.

6

Press the EXIT/STATUS button. You will be prompted to turn off the VCR.

7

Press the EXIT/STATUS button, then press the POWER button to turn off the VCR.

Auto will flash in the display panel until the clock is set. Leave the

VCR power off until the clock is set. If --:-- appears on the display panel after you turn off the VCR, the VCR could not find the time.

You may need to tell the VCR the PBS channel from which to take the time. Follow the steps on page 16.

Setting the Clock (cont’d) 17

7

6

4

3

CBL/DSS VCR

VOL

REW

PAUSE/STILL

PLAY

TV

EJECT POWER MUTE

F.ADV

CHANNEL

FF

VCR PLUS+

/ENTER

STOP

EXIT/STATUS MENU

LIGHT

CLEAR

1

4

7

2

5

8

3

6

9

100 0

GO-TO

REC /OTR INDEX

...

MEMORY

VAR. SLOW

TRACKING SKIP

SPEED VCR/TV SLOW SEARCH

2

5

REMOTE LOCATOR

1

Helpful Hints

• The time will be updated at the top of each hour (except at 11 p.m., midnight, 1 a.m. and 2 a.m.).

• To display the time, press the

EXIT/STATUS button. A status display will appear on the TV screen.

Details are on page 28.

• Power failures can cause you to lose your clock setting and programmed channels.