Playing. Philips VRX442, VRX462, VCR 462

Add to My manuals
64 Pages

advertisement

Playing. Philips VRX442, VRX462, VCR 462 | Manualzz

30 Playing

Read and follow the steps below to play a tape.

1

Turn on the TV and set it to channel 3 or 4, whichever the

CH3/CH4 switch on the back of the VCR is set to.

2

Insert a tape in the VCR. The power will come on. The VCR will place itself in VCR position automatically (the VCR light will appear on the display panel of the VCR). If the VCR light does not appear, press the VCR/TV button once. If the tape’s record tab has been removed, playback will start automatically.

3

If playback does not start automatically, press the PLAY

button. The PLAY light will appear on the VCR display panel.

4

Press the STOP button on the remote control or the

STOP/EJECT button on the VCR once to stop playback.

5

Press the REW(ind) button to rewind the tape.

6

When the tape has finished rewinding, press the EJECT button on the remote control or the STOP/EJECT button on the VCR again to remove the tape.

1

2

Turn on the TV.

Insert a tape.

6

5

CBL/DSS VCR TV

EJECT POWER MUTE

VOL

F.ADV

CHANNEL

REW

PAUSE/STILL

PLAY

FF

VCR PLUS+

/ENTER

STOP

EXIT/STATUS MENU

LIGHT

CLEAR

1

4

7

2

5

8

3

6

9

100 0

GO-TO

REC /OTR INDEX

...

MEMORY

VAR. SLOW

TRACKING SKIP

SPEED VCR/TV SLOW SEARCH

3

4

REMOTE LOCATOR

Helpful Hint

• Playback options and features are discussed on pages 49 - 57.

advertisement

Key Features

  • Automatic channel programming
  • On-screen status displays in English or Spanish
  • MTS (Multi-Channel Television Sound) System
  • Hi-Fi stereo tape playback
  • VCR Plus+ programming system
  • Remote control
  • Index search
  • Repeat playback
  • Automatic head cleaner

Related manuals

Frequently Answers and Questions

How do I set the clock on my Philips VRX462?
The VCR will automatically set the clock when it is first plugged in. However, you can also set the clock manually by pressing the "Clock" button on the remote control.
How do I record a show using the VCR Plus+ programming system?
To record a show using the VCR Plus+ programming system, first enter the channel number and start time of the show into the VCR. Then, press the "VCR Plus+" button on the remote control. The VCR will automatically tune to the correct channel and start recording at the specified time.
How do I use the remote control to operate my TV?
To use the remote control to operate your TV, first press the "TV" button on the remote control. Then, use the number buttons to enter the channel number you want to watch. You can also use the other buttons on the remote control to control the volume, change the input source, and turn the TV on or off.