Hi-Fi Stereo Tape Playback (VRX462 only). Philips VRX442, VRX462, VCR 462

Add to My manuals
64 Pages

advertisement

Hi-Fi Stereo Tape Playback (VRX462 only). Philips VRX442, VRX462, VCR 462 | Manualzz

Hi-Fi Stereo Tape Playback (VRX462 only) 51

If a tape is recorded in Hi-Fi stereo, follow the steps below to play the tape in Hi-Fi stereo.

1

Press the VCR button, then press the MENU button.

2

Press the Number 2 button to select VCR SET UP.

3

Press the Number 7 button to select AUDIO OUT.

4

Press the Number 1 button to select HIFI. (ON) will appear beside HIFI.

5

Press the EXIT/STATUS button.

6

Press the MENU button.

7

Press the Number 3 button to select TUNER SET UP.

8

Press the Number 6 button to select TV STEREO. (ON) will appear beside TV STEREO.

9

Press the EXIT/STATUS button.

10

Press the PLAY button to start tape playback.

10

6

9

5

4

3

CBL/DSS VCR

EJECT POWER

VOL

REW

F.ADV

CHANNEL

PAUSE/STILL

PLAY

VCR PLUS+

/ENTER

STOP

EXIT/STATUS MENU

1

4

7

2

5

8

100 0

GO-TO

REC /OTR INDEX

...

MEMORY

VAR. SLOW

TRACKING SKIP

SPEED VCR/TV SLOW

TV

MUTE

FF

LIGHT

CLEAR

3

6

9

REMOTE LOCATOR

SEARCH

1

7

2

8

Helpful Hints

• During playback, Hi-Fi stereo may temporarily revert to normal audio when you adjust tracking. This is normal.

• If Hi-Fi stereo continually reverts to normal audio during playback, you may want to press the Number 2 button to select MONO at step 4.

• Only tapes recorded in Hi-Fi stereo will play in Hi-Fi stereo. Tapes recorded in normal audio will play in normal audio.

advertisement

Key Features

  • Automatic channel programming
  • On-screen status displays in English or Spanish
  • MTS (Multi-Channel Television Sound) System
  • Hi-Fi stereo tape playback
  • VCR Plus+ programming system
  • Remote control
  • Index search
  • Repeat playback
  • Automatic head cleaner

Related manuals

Frequently Answers and Questions

How do I set the clock on my Philips VRX462?
The VCR will automatically set the clock when it is first plugged in. However, you can also set the clock manually by pressing the "Clock" button on the remote control.
How do I record a show using the VCR Plus+ programming system?
To record a show using the VCR Plus+ programming system, first enter the channel number and start time of the show into the VCR. Then, press the "VCR Plus+" button on the remote control. The VCR will automatically tune to the correct channel and start recording at the specified time.
How do I use the remote control to operate my TV?
To use the remote control to operate your TV, first press the "TV" button on the remote control. Then, use the number buttons to enter the channel number you want to watch. You can also use the other buttons on the remote control to control the volume, change the input source, and turn the TV on or off.