On-Screen Status Displays. Philips VRX442, VRX462, VCR 462

28 On-Screen Status Displays

An on-screen status display, which includes the current time, channel, and other information (see illustration of the status display at right), will appear when you press the EXIT/STATUS button or certain function buttons. The contents of the status display may vary.

ON SCREEN ON:

• Whenever you press the PLAY button or the STOP button, some of the contents of the status display will appear for five seconds.

COUNTER ONLY:

• The tape counter will appear on-screen at all times. Whenever you press the PLAY button or the STOP button, some of the contents of the status display will appear for five seconds. After five seconds, only the counter will remain on the screen.

ON SCREEN OFF:

• No status display will appear when you press function buttons or the EXIT/STATUS button.

To select one of the status display modes, follow these steps.

1

Press the VCR button, then press the MENU button.

2

Press the Number 2 button to select VCR SET UP.

TO SELECT PUSH NO. SHOWN

1 SET REPEAT PLAY (OFF)

2 ON SCREEN MODE

3 LANGUAGE

4 SET VCR PLUS+ CH

5 SET CABLE BOX

6 SET DSS RECEIVER

7 AUDIO OUT

8 VIDEO STABILIZER (OFF)

TO END PUSH EXIT

3

Press the Number 2 button to select ON SCREEN MODE.

TO SELECT PUSH NO. SHOWN

1 ON SCREEN ON (ON)

2 COUNTER ONLY

3 ON SCREEN OFF

Function Button

Pressed Time

Channel

STOP 12:00 AM

CH 10

SLP M 1:23:45 HIFI

Tape

Speed Sound Program

Tape Counter and

Counter Memory

TO END PUSH EXIT

4

Press the Number 1 button to select ON SCREEN ON, the Number 2 button to select COUNTER ONLY, or the

Number 3 button to select ON SCREEN OFF. (ON) will appear beside the selected status display mode.

5

Press the EXIT/STATUS button to exit.

Helpful Hints

• In On Screen On and Counter Only modes:

• You may bring up the status display at any time by pressing the

EXIT/STATUS button. (The exception is during Slow, Search, or Still mode.) The display will appear for about five seconds.

• Channel numbers (when tuned) will appear for a few seconds.

• When tape playback is stopped, press the EXIT/STATUS button at any time to see the time, counter information, or channel number on the display panel. During tape playback, press the EXIT/STATUS button to see the time or counter information on the display panel. The channel will not appear.