F.(rame) ADV(ance) Button
In Still mode, press to advance the picture one frame at a time.
Details are on page 56.
STOP Button
Press to stop the tape. Or, if you have a Magnavox or Philips TV, press to move down or backward one row or selection in the TV menu system.
VCR PLUS+/ENTER Button
Press to program a timer recording with the VCR Plus+
Programming System. Details are on pages 40 - 41.
EXIT/STATUS Button
Press to exit on-screen menus.
Press to bring up the status display for five seconds. Details are
on page 28. When tape playback is stopped, press repeatedly to see the time, counter information, or channel number on the display panel. During tape playback, press repeatedly to see the time and counter information on the display panel. Or, if you have a
Magnavox or Philips TV, press the
TV button, then press the
EXIT/STATUS button to access the TV on-screen displays or to exit the TV menu system.
(Tape) SPEED Button
Press to select a recording speed
(SP or SLP). Details are on pages
31, 36, and 58.
VCR/TV Button
Press to select the signal that your TV receives.
• VCR Position
Use to watch a tape, to watch a program while recording it, or to watch a TV broadcast using the
CHANNEL Up/Down or Number buttons.
• TV Position
Use to watch TV or to watch one program while recording another.
Details are on page 33.
CBL/DSS VCR
EJECT POWER MUTE
VOL
REW
VCR PLUS+
/ENTER
STOP
EXIT/STATUS MENU
1
4
7
F.ADV
CHANNEL
PAUSE/STILL
PLAY
2
5
8
Remote Control Buttons (cont’d) 21
TV
FF
LIGHT
CLEAR
3
6
9
100 0 GO-TO
REC /OTR INDEX
...
MEMORY
VAR. SLOW
TRACKING SKIP
PAUSE/STILL Button
When in Record mode, press to temporarily stop the recording
(pause). Press a second time to resume normal recording. Details are
on page 31. When in Play mode, press once to freeze the picture
(still). Press a second time to resume normal playback. Details are on page
56.
FF (Fast Forward) Button
When in Stop mode, press to advance the tape at high speed.
When in Play mode, press to advance the tape while the picture stays onscreen. Details are on page 56. Or, if you have a Magnavox or Philips TV, press to adjust (increase) the picture controls.
LIGHT Button
Press to illuminate the VOL(ume),
CHANNEL, PLAY, REW(ind), FF
(Fast Forward), and STOP buttons for five seconds.
CLEAR Button
Press to erase incorrect data when programming VCR functions. Also, press to reset the tape counter to
0:00:00. Details are on page 52.
MEMORY Button
Press to memorize a tape location at which the tape counter was set to
0:00:00. Details are on page 52.
TRACKING Buttons
When in Play or Slow mode, press to adjust the tracking. In Still mode, press to eliminate vertical jitter.
Details are on page 57.
SPEED VCR/TV SLOW SEARCH
REMOTE LOCATOR
Helpful Hint
• This remote control may or may not operate your TV, Cable Box, or
DSS Receiver. Or, it may only work some features of this equipment.
See “Setting the Remote Control to
Operate a TV” on page 26 and
“Setting the Remote Control to
Operate a Cable Box/DSS
Receiver” on page 27 for details.
22 Display Panel
VRX462
VCR Display Panel
Information about VCR operations appears here. Different information appears at different times.
Cassette Compartment
Insert a tape here.
POWER PAUSE
HQ
VIDEO
L AUDIO R
VCR/TV
OTR
VCR
SP
AM
SLP
PM
TIMER H M S
ST REC
PLAY
SAP
M PAUSE
CHANNEL
REW
PLAY
STOP/EJECT
FF
REC/OTR
Hi- Fi
VCR Light
This light appears when the VCR is in VCR position.
Mode Lights
These lights tell you the current operation of the
VCR: REC(ord), PLAY, or PAUSE.
OTR
VCR
SP
AM
SLP
PM
TIMER H M S
ST
SAP
M
REC
PLAY
PAUSE
TIMER Light
This light appears when a timer recording is programmed or is in progress. Details are on pages
34 - 41. This light blinks rapidly if the VCR is turned off to set a Timer Recording but a tape is not in the VCR.
Cassette-Inside Light
This light appears when a tape is in the VCR. It blinks when a tape is being ejected. This light blinks rapidly if the VCR is turned off to set a Timer Recording but there is not a tape in the VCR.
Sound Program Lights
These lights appear when a stereo or second audio program is available.
(ST means a stereo broadcast is
available; SAP means a second audio program is available.) You still must set the VCR to receive, record, or play a tape in stereo or second audio. Details are on pages 49
- 51.
These lights are not available on the VRX442.
Line Input Mode Light
When L appears here, the VCR is in Line Input mode. (Select Line Input mode by pressing
Number buttons 00. Exit Line Input mode by using the Number buttons or the CHANNEL
Up/Down buttons to select another channel.)