Technical data. Busch-Jaeger 1098 U-101, 1098 UF-101
Add to My manuals42 Pages
Busch-Jaeger 1098 UF-101 is an electronic room temperature controller that offers precise temperature regulation for heating systems or electric floor heating. With its user-friendly interface and advanced features, it provides flexibility and comfort for managing indoor temperatures. Here's a brief overview of its capabilities:
-
Time-controlled temperature regulation: The device allows you to set specific heating schedules, ensuring optimal temperatures at desired times.
-
Simple operation: The clear display and intuitive button layout make it easy to navigate and adjust settings.
-
Energy-saving modes: The standby and valve protection functions help optimize energy consumption by automatically reducing heating when not needed.
advertisement
![Technical data. Busch-Jaeger 1098 U-101, 1098 UF-101 | Manualzz Technical data. Busch-Jaeger 1098 U-101, 1098 UF-101 | Manualzz](http://s2.manualzz.com/store/data/063824174_1-24c47186fe4d9b620e77bd884a9ea84b-360x466.png)
Technical data
5 Technical data
Nominal voltage:
Nominal power:
Control range: 1098 U-101
1098 UF-101
Opening of change-over contact:
Power reserve:
Memory locations:
Shortest switching interval:
Ambient temperature:
Protection type:
Regulation
Input:
Summer/winter time:
1098 UF-101
Mode of operation (DIN EN 60730-1):
Degree of contamination (DIN EN 60730-1):
Rated surge voltage (DIN EN 60730-1):
Product manual 2CKA001473B8291
230 V AC ±10%, 50 Hz
1098 U-101
1098 UF-101
Change-over contact/normally open contact closed while deenergized
(connection 1)
Change-over contact/normally closed contact open while deenergized
(connection 2)
Change-over contact/normally open contact closed while deenergized
(connection 1)
Change-over contact/normally closed contact open while deenergized
(connection 2)
5°C - 30°C
10°C - 50°C
< 3 mm µ
Approx. 10 h at 25°C
10 (4) A
5 (2) A
16 (2) A
5 (2) A
Maximum of 28 switching times
5 minutes
0°C - 30°C
IP 20
EN 60 730-2-9
External remote sensor
Automatic changeover
1B
2
4000 V
│
11
advertisement
Related manuals
advertisement
Table of contents
- 4 Notes on the instruction manual
- 5 Safety
- 5 Information and symbols used
- 6 Intended use
- 6 Improper use
- 7 Target group / Qualifications of personnel
- 7 Operation
- 7 Installation, commissioning and maintenance
- 8 Safety instructions
- 9 Information on protection of the environment
- 9 Environment
- 10 Setup and function
- 10 Features of function and equipment
- 10 Control elements
- 11 Technical data
- 12 Connection, installation / mounting
- 12 Requirements for the electrician
- 13 Mounting/dismantling
- 15 Electrical connection
- 16 Commissioning
- 17 Operation
- 17 Notes on operation
- 18 Operating modes
- 19 Normal operation
- 19 Display
- 20 Button assignment
- 21 Device settings
- 22 Menu tree
- 24 Language
- 25 RESET (Resetting the device)
- 25 RESET (resetting to the factory settings)
- 26 Setting the starting / switching times
- 26 General
- 27 Block programming
- 29 Calling up special functions
- 29 MAX and MIN values
- 31 Valve protection
- 32 Standby times
- 33 OFFSET
- 34 Button lock
- 35 Date / Time
- 37 Adjust temperature
- 39 Display during mains power failure
- 40 Maintenance
- 40 Cleaning
- 41 Index