Standby times. Busch-Jaeger 1098 U-101, 1098 UF-101

8.6.3 Standby times

Operation

Fig. 14: Menu item – Standby times

Standby mode is not activated at the factory. The activation and adjustment (reduction) of the temperature during absence can be activated or deactivated here.

Button Display Entry / Comments

– Press the menu button for 2 seconds to switch to the setting mode.

Starting times

Special functions

Standby

On / Off

On

– Select menu "Special functions" via the arrow buttons.

– Press the OK button to select menu item "Standby times".

The default setting flashes.

– Set the standby times to ON or OFF via the arrow buttons.

– Confirm your entry with the "OK" button.

In the example the setting "On" has been selected.

– Press the menu button to switch to menu level "Special functions".

Special functions

– Press the menu button again to switch to the operating mode.

Table 4: Sequence of operating steps

Product manual 2CKA001473B8291

│

32