Maintenance. Busch-Jaeger 1098 U-101, 1098 UF-101
Add to My manuals42 Pages
Busch-Jaeger 1098 UF-101 is an electronic room temperature controller that offers precise temperature regulation for heating systems or electric floor heating. With its user-friendly interface and advanced features, it provides flexibility and comfort for managing indoor temperatures. Here's a brief overview of its capabilities:
-
Time-controlled temperature regulation: The device allows you to set specific heating schedules, ensuring optimal temperatures at desired times.
-
Simple operation: The clear display and intuitive button layout make it easy to navigate and adjust settings.
-
Energy-saving modes: The standby and valve protection functions help optimize energy consumption by automatically reducing heating when not needed.
advertisement
![Maintenance. Busch-Jaeger 1098 U-101, 1098 UF-101 | Manualzz Maintenance. Busch-Jaeger 1098 U-101, 1098 UF-101 | Manualzz](http://s2.manualzz.com/store/data/063824174_1-24c47186fe4d9b620e77bd884a9ea84b-360x466.png)
Maintenance
9 Maintenance
9.1 Cleaning
Caution! - Risk of damaging the device!
■ When spraying on cleaning agents, these can enter the device through crevices.
– Do not spray cleaning agents directly onto the device.
■ Aggressive cleaning agents can damage the surface of the device.
– Never use caustic agents, abrasive agents or solvents.
Clean dirty devices with a soft dry cloth.
– If this is insufficient, the cloth can be moistened slightly with a soap solution.
Product manual 2CKA001473B8291
│
40
advertisement
Related manuals
advertisement
Table of contents
- 4 Notes on the instruction manual
- 5 Safety
- 5 Information and symbols used
- 6 Intended use
- 6 Improper use
- 7 Target group / Qualifications of personnel
- 7 Operation
- 7 Installation, commissioning and maintenance
- 8 Safety instructions
- 9 Information on protection of the environment
- 9 Environment
- 10 Setup and function
- 10 Features of function and equipment
- 10 Control elements
- 11 Technical data
- 12 Connection, installation / mounting
- 12 Requirements for the electrician
- 13 Mounting/dismantling
- 15 Electrical connection
- 16 Commissioning
- 17 Operation
- 17 Notes on operation
- 18 Operating modes
- 19 Normal operation
- 19 Display
- 20 Button assignment
- 21 Device settings
- 22 Menu tree
- 24 Language
- 25 RESET (Resetting the device)
- 25 RESET (resetting to the factory settings)
- 26 Setting the starting / switching times
- 26 General
- 27 Block programming
- 29 Calling up special functions
- 29 MAX and MIN values
- 31 Valve protection
- 32 Standby times
- 33 OFFSET
- 34 Button lock
- 35 Date / Time
- 37 Adjust temperature
- 39 Display during mains power failure
- 40 Maintenance
- 40 Cleaning
- 41 Index