Setting the starting / switching times. Busch-Jaeger 1098 U-101, 1098 UF-101

Operation

8.5 Setting the starting / switching times

8.5.1 General

■

■

■

■

STANDBY times can only be set to a point of time that is later than the set comfort time.

Night mode cannot be set after 23:59 h, since the starting time (night) will jump to the comfort time programmed on the same day.

BLOCK programming

– So that the switching times need not be entered again for each individual day, the

BLOCK programming function is available. This means that the switching times are entered once for block (Mon - Fri) and once more for block (Sat - Sun).

DAY programming

– Here the switching times for each day can be set independent from each other.

The settings that are available and how the individual menu items are called up is described in the following sub-sections.

Product manual 2CKA001473B8291

│

26