advertisement
Operation
8 Operation
8.1
No special qualifications are needed to operate the device.
Notes on operation
In the event of a power failure, the internal clock continues to operate for about 10 hours. After this the time and date have to be reprogrammed. All other data remain saved.
The operating element can be removed from the flush-mounting insert for approximately 20 minutes and adjusted separately.
A total of 4 switching times per day can be set:
– 2 x for comfort mode
– 1 x for standby mode
– 1 x for night mode
If the display is on --:--, this can mean the following:
– No time has been set
– The memory is not occupied
– The function is not active
Flashing numbers / values can be changed. If no entry is made, the display switches back to the operating mode after 2 minutes.
Product manual 2CKA001473B8291
│
17
advertisement