Button lock. Busch-Jaeger 1098 U-101, 1098 UF-101

8.6.5 Button lock

Operation

Fig. 16: Menu item - Button lock

To protect the basic settings against being unintentionally changed, the device has a button lock. To release the button lock when it is active, one of the buttons must be pressed for 5 seconds.

Button Display Entry / Comments

– Press the menu button for 2 seconds to switch to the setting mode.

Starting times

Special functions

Button lock

On / Off

On

– Select menu "Special functions" via the arrow buttons.

– Press the OK button to select menu item "Button lock".

The default setting flashes.

– Set the button lock to ON or OFF via the arrow buttons.

– Confirm your entry with the "OK" button.

In the example the setting "On" has been selected.

The button lock has been activated.

– Press the menu button to switch to menu level "Special functions".

Special functions

– Press the menu button again to switch to the operating mode.

Table 6: Sequence of operating steps

Product manual 2CKA001473B8291

│

34