- Computers & electronics
- Telecom & navigation
- Telephones
- Aiphone
- IXG-MK Guard Station
- Operation manual
advertisement
3
How to use
Sending a page
Page / Receive paging
Send a page to stations that were registered in advance.
[PAGE] may not be displayed on the Home Screen, depending on the configuration. If this is the case, this function cannot be used.
1.
Lift the handset.
4.
Tap or
[URGENT PAGE]
.
• If the handset is lifted after specifying page destination, the call will be placed under
[Normal] priority.
2.
Tap on the Home Screen.
• The page will be sent with the selected priority.
5.
Speak after the paging pretone.
3.
Tap the page destination.
, and
) for operations when paging.
6.
To end page, hang up the handset or tap .
• Refer to ( → page 31) for how to search page
destinations.
38
3
How to use
Note
• When the station being paged answers, the page will end and a call will be established with the station that answered.
• The ringback tone will sound until paging begins.
• Depending on the configuration, the Paging Pretone may be heard from an externally installed speaker or other device.
• If the Paging Timeout was previously set on this station elapses, the page will automatically end. A notification tone will play approximately 10 seconds prior to the page ending. The notification tone may not play, depending on the configuration.
• The Paging Pretone may not sound, depending on the configuration.
• If a page with a higher priority is received from another station during a page or call, the page or call will be interrupted and the station will switch to the page with the higher priority.
• When receiving another call while paging, a notification tone will be heard from the handset or built-in speaker. Tap
to choose the station to speak. ( → page 63)
• Tapping the handset and the station. Tap on.
during page turns off the microphones of
to turn them back
Page / Receive paging
39
advertisement
Related manuals
advertisement
Table of contents
- 2 Literature information
- 3 Precautions
- 4 Precautions on operation
- 9 Part Names
- 11 Status Indicators
- 13 Camera View Range and Mounting Position
- 14 User Interface
- 20 Entering Text
- 21 Answering a call
- 24 Setting the date and time
- 26 About microSD card
- 27 Inserting/Removing microSD Cards
- 29 Specifying a station
- 29 Selecting / Choosing / Calling by Number
- 30 Specify a station or unit using the address book
- 31 Searching for stations
- 32 Call / Recording History
- 32 Reviewing Call History
- 33 History Screen
- 34 Placing / Answering a Call
- 34 Calling the other party
- 36 Use an external device to place a call
- 37 Answering a call
- 38 Page / Receive paging
- 38 Sending a page
- 40 Sending a message page
- 43 Contact Input Page
- 44 Receiving a page
- 46 Monitoring
- 46 Monitoring a door station
- 48 Scan Monitoring
- 50 Using Speed Dial Buttons
- 51 Checking recordings
- 51 Viewing Recordings
- 53 Understanding the Playback Screen
- 54 Play Video/Audio Recordings using a PC
- 55 Transfer
- 55 Transfer calls (during communication)
- 58 Absent Transfer
- 59 Other Transfer Options
- 60 Operations while placing a call, in communication, paging and monitoring
- 60 Unlocking a door
- 62 Placing a call on hold
- 63 Selecting a station to answer
- 64 Recording Video / Audio
- 65 Fixing the Capture Area
- 66 Adjusting video to enhance visibility
- 67 Adjusting Screen Brightness
- 68 Adjusting speaker volume
- 69 Adjusting microphone volume
- 70 Adjusting Ringtone Volume
- 71 Checking the System
- 71 Confirming Station Information
- 72 Other functions
- 72 Configuring the station sound a tone on a schedule
- 73 Sending an email
- 74 Configuring on the station
- 74 Configuring settings
- 92 How to configure the Ringtone
- 93 How to configure Absent Transfer settings
- 94 How to configure Delay Transfer settings
- 96 How to configure Schedule Transfer (Daily Schedule)
- 98 How to configure Schedule Transfer (Weekly Schedule)
- 101 How to configure Scan Monitoring
- 102 How to configure Chime Settings (Daily Schedule)
- 104 How to configure Chime Settings (Weekly Schedule)
- 106 How to configure the Status Output
- 107 How to configure Door Release settings
- 108 How to configure Relay Output Schedule (Daily Schedule)
- 110 How to configure Relay Output Schedule (Weekly Schedule)
- 112 How to configure Speed Dial Settings
- 121 Appendix
- 121 Specifications
- 121 Maintenance
- 122 Notice regarding the software
- 126 FOR PROPER USE OF THE STATION
- 126 REGULATIONS
- 127 WARRANTY