How to configure Delay Transfer settings. Aiphone IXG-MK Guard Station

4

Settings and Adjustments Configuring on the station

How to configure Delay Transfer settings

Important

When a transfer destination includes the Mobile App of another Unit, the original call to any Mobile Apps will be canceled when the transfer occurs.

Refer to “Configuring settings ( → page 74)” for information on how to display the setting screens.

1.

On the Transfer Settings screen, tap [Delay Transfer] .

• The Delay Transfer Settings screen will be shown.

2.

Tap to configure the transfer destination unit.

To configure a retransfer destination, tap the "Re" row and tap [EDIT] .

* Up to 1 unit can be configured for the transfer destination. 1 station can be configured for the re-transfer (i.e. transfer a transferred call) destination.

• To change a registered transfer destination, tap the destination to change, and tap [EDIT] .

• To delete a registered transfer destination, tap the destination to delete, and then tap [DELETE] .

• The Select Destination screen will be shown.

3.

Tap the unit or station to configure as a transfer destination.

* If specifying units or stations in other buildings, tap [SELECT BUILDING] first, and select a building.

* Refer to

“Searching for stations ( → page 31)”

to search for units and stations.

4.

Tap .

• The Delay Transfer Settings screen will be shown.

* Stations of the room set as the transfer destination are displayed in rows No. 1 to 10 (left-side column of the transfer destination station list), and the station set as the retransfer destination is displayed in the "Re" row.

94

4

Settings and Adjustments

5.

Configure .

Configuring on the station

6.

Tap .

• The settings will be saved.

95