- Computers & electronics
- Telecom & navigation
- Telephones
- Aiphone
- IXG-MK Guard Station
- Operation manual
Operations while placing a call, in communication, paging and monitoring. Aiphone IXG-MK Guard Station
Add to My manuals129 Pages
advertisement
3
How to use
Unlocking a door
In the following case, the electric lock can be released.
• Incoming call (only while the video is displayed)
• Communicating
• Monitoring
Releasing with the door release button
1.
Tap .
• The door unlocks.
Operations while placing a call, in communication, paging and monitoring
Releasing with the keypad
Depending on the configuration, the not be displayed.
1.
Tap .
button may
• When the door is released, switches to
for 3 seconds.
• The status indicator of the master station will flash blue when the door is released.
2.
Use the keypad to enter
"**authentication key*."
• If the authentication key is "0000" enter
"**0000*." Note
• If the door cannot be released, an error tone will sound.
• Depending on the configuration, tapping the door release button a second time while the door is already released will extend the door release timer.
• Depending on the setting, if the electrical lock is released during incoming calls from the Entrance Station or while communicating, the incoming call or communication will end automatically after approximately 10 seconds.
• Tap to delete the previous character.
60
3
How to use
3.
Tap .
• The door unlocks.
Operations while placing a call, in communication, paging and monitoring
• When the door is released, switches to
for 3 seconds.
• The status indicator of the master station will flash blue when the door is released.
Note
• Depending on the configuration of the station receiving the door release command, a notification tone may be heard when the authentication key is confirmed.
• If the door cannot be released, an error tone will sound.
• Ask the administrator for the authentication key.
• Depending on the configuration, tapping the door release button a second time while the door is already released will extend the door release timer.
• Depending on the setting, if the electrical lock is released during incoming calls from the Entrance Station or while communicating, the incoming call or communication will end automatically after approximately 10 seconds.
61
advertisement
Related manuals
advertisement
Table of contents
- 2 Literature information
- 3 Precautions
- 4 Precautions on operation
- 9 Part Names
- 11 Status Indicators
- 13 Camera View Range and Mounting Position
- 14 User Interface
- 20 Entering Text
- 21 Answering a call
- 24 Setting the date and time
- 26 About microSD card
- 27 Inserting/Removing microSD Cards
- 29 Specifying a station
- 29 Selecting / Choosing / Calling by Number
- 30 Specify a station or unit using the address book
- 31 Searching for stations
- 32 Call / Recording History
- 32 Reviewing Call History
- 33 History Screen
- 34 Placing / Answering a Call
- 34 Calling the other party
- 36 Use an external device to place a call
- 37 Answering a call
- 38 Page / Receive paging
- 38 Sending a page
- 40 Sending a message page
- 43 Contact Input Page
- 44 Receiving a page
- 46 Monitoring
- 46 Monitoring a door station
- 48 Scan Monitoring
- 50 Using Speed Dial Buttons
- 51 Checking recordings
- 51 Viewing Recordings
- 53 Understanding the Playback Screen
- 54 Play Video/Audio Recordings using a PC
- 55 Transfer
- 55 Transfer calls (during communication)
- 58 Absent Transfer
- 59 Other Transfer Options
- 60 Operations while placing a call, in communication, paging and monitoring
- 60 Unlocking a door
- 62 Placing a call on hold
- 63 Selecting a station to answer
- 64 Recording Video / Audio
- 65 Fixing the Capture Area
- 66 Adjusting video to enhance visibility
- 67 Adjusting Screen Brightness
- 68 Adjusting speaker volume
- 69 Adjusting microphone volume
- 70 Adjusting Ringtone Volume
- 71 Checking the System
- 71 Confirming Station Information
- 72 Other functions
- 72 Configuring the station sound a tone on a schedule
- 73 Sending an email
- 74 Configuring on the station
- 74 Configuring settings
- 92 How to configure the Ringtone
- 93 How to configure Absent Transfer settings
- 94 How to configure Delay Transfer settings
- 96 How to configure Schedule Transfer (Daily Schedule)
- 98 How to configure Schedule Transfer (Weekly Schedule)
- 101 How to configure Scan Monitoring
- 102 How to configure Chime Settings (Daily Schedule)
- 104 How to configure Chime Settings (Weekly Schedule)
- 106 How to configure the Status Output
- 107 How to configure Door Release settings
- 108 How to configure Relay Output Schedule (Daily Schedule)
- 110 How to configure Relay Output Schedule (Weekly Schedule)
- 112 How to configure Speed Dial Settings
- 121 Appendix
- 121 Specifications
- 121 Maintenance
- 122 Notice regarding the software
- 126 FOR PROPER USE OF THE STATION
- 126 REGULATIONS
- 127 WARRANTY