- Computers & electronics
- Telecom & navigation
- Telephones
- Aiphone
- IXG-MK Guard Station
- Operation manual
How to configure Chime Settings (Weekly Schedule). Aiphone IXG-MK Guard Station
Add to My manuals129 Pages
advertisement
4
Settings and Adjustments Configuring on the station
How to configure Chime Settings (Weekly
Schedule)
Configure the start time and chime tone to play for each day of the week, from Sunday to Saturday. 50 schedules can be set for each day of the week.
Refer to “Configuring settings ( → page 74)” for information on how to display the setting screens.
1.
On the Chime Schedule screen, tap [WEEKLY SETTINGS] .
• The Weekly Schedules screen will be shown.
2.
Tap the day of the week to configure the chime.
3.
Tap .
* To change a registered schedule, tap the row to change, and tap [EDIT] .
* To delete a registered schedule, tap the row to delete, and then tap [DELETE] .
* To delete all weekly schedules for the displayed day, tap [DELETE ALL] .
• The Set Schedule screen will be shown.
104
4
Settings and Adjustments
4.
Tap .
Configuring on the station
• The Select Chime screen will be shown.
5.
Tap the chime tone to play.
*Refer to “Searching for stations ( → page 31)” to search chime tones.
6.
Tap .
• The Set Schedule screen will be shown.
7.
Configure the start time.
8.
Tap .
• The settings will be saved.
105
advertisement
Related manuals
advertisement
Table of contents
- 2 Literature information
- 3 Precautions
- 4 Precautions on operation
- 9 Part Names
- 11 Status Indicators
- 13 Camera View Range and Mounting Position
- 14 User Interface
- 20 Entering Text
- 21 Answering a call
- 24 Setting the date and time
- 26 About microSD card
- 27 Inserting/Removing microSD Cards
- 29 Specifying a station
- 29 Selecting / Choosing / Calling by Number
- 30 Specify a station or unit using the address book
- 31 Searching for stations
- 32 Call / Recording History
- 32 Reviewing Call History
- 33 History Screen
- 34 Placing / Answering a Call
- 34 Calling the other party
- 36 Use an external device to place a call
- 37 Answering a call
- 38 Page / Receive paging
- 38 Sending a page
- 40 Sending a message page
- 43 Contact Input Page
- 44 Receiving a page
- 46 Monitoring
- 46 Monitoring a door station
- 48 Scan Monitoring
- 50 Using Speed Dial Buttons
- 51 Checking recordings
- 51 Viewing Recordings
- 53 Understanding the Playback Screen
- 54 Play Video/Audio Recordings using a PC
- 55 Transfer
- 55 Transfer calls (during communication)
- 58 Absent Transfer
- 59 Other Transfer Options
- 60 Operations while placing a call, in communication, paging and monitoring
- 60 Unlocking a door
- 62 Placing a call on hold
- 63 Selecting a station to answer
- 64 Recording Video / Audio
- 65 Fixing the Capture Area
- 66 Adjusting video to enhance visibility
- 67 Adjusting Screen Brightness
- 68 Adjusting speaker volume
- 69 Adjusting microphone volume
- 70 Adjusting Ringtone Volume
- 71 Checking the System
- 71 Confirming Station Information
- 72 Other functions
- 72 Configuring the station sound a tone on a schedule
- 73 Sending an email
- 74 Configuring on the station
- 74 Configuring settings
- 92 How to configure the Ringtone
- 93 How to configure Absent Transfer settings
- 94 How to configure Delay Transfer settings
- 96 How to configure Schedule Transfer (Daily Schedule)
- 98 How to configure Schedule Transfer (Weekly Schedule)
- 101 How to configure Scan Monitoring
- 102 How to configure Chime Settings (Daily Schedule)
- 104 How to configure Chime Settings (Weekly Schedule)
- 106 How to configure the Status Output
- 107 How to configure Door Release settings
- 108 How to configure Relay Output Schedule (Daily Schedule)
- 110 How to configure Relay Output Schedule (Weekly Schedule)
- 112 How to configure Speed Dial Settings
- 121 Appendix
- 121 Specifications
- 121 Maintenance
- 122 Notice regarding the software
- 126 FOR PROPER USE OF THE STATION
- 126 REGULATIONS
- 127 WARRANTY