Getting Started and Setting up. ONKYO CD-S501S, LS-V501 (DR-S501), DR-S501

34

Playing Discs —Continued

■ Stop

DVD receiver

Remote controller

To stop playback, press the Stop

[ ] button.

Playback stops and the Play indicator disappears.

• When you stop playback of a

DVD-Video disc, the DVD receiver remembers the point at which playback was stopped and “Resume” appears onscreen. To resume playback from that point, press the Play

[ ] button. To cancel the “Resume” function, press the Stop [ ] button again. The Resume function is reset when the disc is removed from the

DVD receiver.

• With the Last Memory function you can resume playback from any point even if the disc has been removed

(see page 49).

Notes:

• Prolonged display of the same picture or menu may cause irreparable damage to your TV screen known as screen burn-in . To prevent this, don’t keep playback paused for too long and always press the Stop [ ] button when you’ve finished playing a DVD disc or VCD.

The DVD receiver features a screen saver to protect your TV from the effects of burn-in (see page 65).

• With some DVD-Video discs, you may experience picture noise that is not normally visible with standard

TV broadcasts. This is usually because DVD-Video uses a lot of high-resolution video data. The amount of noise, if any, will depend on your particular TV and the problem can sometimes be alleviated by turning down the TV’s sharpness control.

Select Next & Previous track/chapter

DVD-V DVD-A SACD VCD CD MP3 WMA DivX JPEG

This section explains how to skip to the next and previous track and chapter.

■

Select

Next track/ chapter

DVD receiver

[

During Playback, press the Next

] button to select next track/ chapter.

The Next track/chapter starts playback.

Remote controller

■ Select

Previous track/ chapter

DVD receiver

During Playback, press the Previous [ ] button to select previous track/chapter.

The first press selects the beginning of the current track.

Remote controller

Playing Discs —Continued

Forward Frame-by-Frame Playback

DVD-V VCD

With frame-by-frame playback you can view individual picture frames one at a time forward.

■ Forward frame-byframe

Press the Pause [ ] button.

Press it repeatedly to view subsequent frames.

To resume normal playback, press the

Play [ ] button.

Fast Forward & Reverse

DVD-V DVD-A

SACD VCD CD MP3 DivX

This section explains how to fast forward and reverse.

■ Fast forward

During playback, press the [ button to start fast forward.

To resume normal playback, press the

Play [ ] button.

]

Playback fast forwards and “ x2” appears onscreen.

To change the fast-forward speed, press the [ ] button repeatedly to select: x2, x4, x8, x16.

■ Fast reverse

During playback, press the [ button to start fast reverse.

]

Playback reverses and “ x2” appears onscreen.

To change the fast-reverse speed, press the [ ] button repeatedly to select: x2, x4, x8, x16.

To resume normal playback, press the

Play [ ] button.

Notes:

• Fast forward and fast reverse may not always work at the speed shown onscreen.

• For discs other than audio CDs, no sound is output during fast forward or fast reverse.

• For DVD-Audio discs, fast forward and fast reverse cannot be used while a menu is displayed.

35