Before Making Any Connections. ONKYO CD-S501S, LS-V501 (DR-S501), DR-S501

Connecting the DVD receiver —Continued

Before Making Any Connections

• Read the manuals supplied with your AV components.

• Don’t connect the power cord until you’ve completed all audio and video connections.

RCA AV Connection Color Coding

RCA AV connections are usually color coded: red, white, and yellow. Use red plugs to connect right-channel audio inputs and outputs (typically labeled “R”). Use white plugs to connect left-channel audio inputs and outputs (typically labeled “L”). And use yellow plugs to connect composite video inputs and outputs.

Analog audio

Right (red) Right (red)

Left (white) Left (white)

(Yellow)

Composite video (Supplied)

(Yellow)

• Push each plug in all the way to make a good connection (loose connections can cause noise or malfunctions).

• To prevent interference, keep audio and video cables away from power cords and speaker cables.

Right!

Wrong!

Optical Digital Jacks

The DVD receiver’s optical digital connectors have a shutter-type cover that opens when an optical plug is inserted, and closes when it’s removed. Push the plug in all the way.

Caution: To prevent shutter damage, hold the optical plug straight when inserting and removing.

Basic Setup

The setup described here is a basic setup that allows you to play discs using just the cables supplied with the receiver.

TV

Video cable

(Supplied)

VIDEO IN

This receiver is equipped with copy protection technology. Do not connect this receiver to your TV via a

VCR using Video cable, as the picture from this receiver will not appear properly on your TV. (This receiver may also not be compatible with some combination TV/VCRs for the same reason; refer to the manufacturer for more information.)

To power outlet

Power cord

(Supplied)

1. Connect the VIDEO OUTPUT jack to the composite video input on your TV.

Use the supplied Video cable (RCA), connecting the yellow plug to the video output.

See the following page if you want to use other cable for the video connection.

2. Connect the supplied AC power cord to the AC

INLET, then plug into a power outlet.

23