advertisement
H9229UD.qxp 02.7.31 2:24 PM Page 12
59.
60.
61.
62.
63.
DVD/VCR AUDIO OUT Jacks
Connect the supplied audio cables here and to the
Audio In jacks of a television or other audio equipment.
COMPONENT VIDEO OUT Jacks
Connect optional component video cables here and to the component Video In jacks of a television.
COAXIAL Jack
Connect an optional coaxial digital audio cable here and to the Coaxial Digital Audio In jack of a decoder or audio receiver.
S-VIDEO OUT Jack
Connect an optional S-Video cable here and to the S-Video In jack of a television.
DVD/VCR VIDEO OUT Jack
Connect the yellow video cable (supplied) here and to the TV’s Video In jack.
64.
65.
66.
67.
VIDEO IN Jack
Connect a cable coming from the video out jack of a camcorder, another VCR, or an audio-visual source (laser disc player, video disc player, etc.) here.
CH3/CH4 Switch
Set to channel 3 or 4 to use your TV with your
VCR.
ANT-IN (Antenna In) Jack
Connect your antenna, Cable Box, or Direct
Broadcast System.
ANT-OUT (Antenna Out) Jack
Use the supplied RF cable to connect this jack to the ANTENNA IN Jack on your TV.
Notes
¡
The S-VIDEO OUT jack, COAXIAL jack, OPTI-
CAL jack, and COMPONENT VIDEO OUT jacks are only useful in DVD mode.
DISPLAY
Lit when the
A-B repeat function is on.
Lit when the repeat function is on.
Lights up when the inserted disc comes to a pause.
Lit when the inserted disc is being played back.
Lights up when a DVD is inserted into the tray.
DISPLAYS DURING
OPERATION
Power on
No disc inserted
Tray open
Tray closed
Lights up when a
CD is inserted on the tray.
Loading the Disc
Displays how long the current title or track has been playing. When a chapter or track is switched, the number of the new title, chapter or track is displayed.
Power off
LOADING THE BATTERIES
1. Open the battery compartment cover.
2. Insert two AA batteries, with each one oriented correctly.
3. Close the cover.
Notes
¡ Do not mix alkaline and manganese batteries.
¡
Do not mix old and new batteries.
– 12 –
EN
1L25
H9229UD.qxp 02.7.31 2:24 PM Page 13
VCR/DVD SWITCHING
Since this product comprises VCR and DVD players, it is necessary to select the correct output mode.
SWITCHING TO VCR MODE
Press the VCR button on the remote control.
(Verify that the VCR OUTPUT Light is lit.)
SWITCHING TO DVD MODE
Press the DVD button on the remote control.
(Verify that the DVD OUTPUT Light is lit.)
Notes
¡ Pressing only the OUTPUT button on the front panel does not switch the mode of the remote control. You always need to select the correct mode on the remote control too.
LAY FWD/SKIP
POWER
OPEN/CLOSE STOP SKIP/REV
DVD OPERATION
PLAY FWD/SKIP
OUTPUT VCR OPERATION
STOP/EJECT REW PLAY F.FWD
REC/OTR
CHANNEL
TIMER
SET
VCR/TV
CST.IN
VIDEO
L
AUDIO
R
VD OPERATION OUTPUT
DVD OUTPUT Light
DVD button
VCR OUTPUT Light
VCR button
VCR OPERATIO
STOP/EJECT REW
OUTPUT button
POWER SPEED AUDIO
1
4
2
5
7 8
DISPLAY
0
DVD
3
SKIP/CH.
6
VCR/TV
9
+100
+
10
VCR
SLOW
PAUSE
PLAY
STOP
RECORD
MENU
SETUP TITLE
ENTER
RETURN
MODE ZOOM
SEARCH
MODE
CLEAR/
C.RESET
SUBTITLE ANGLE REPEAT A-B
– 13 –
EN
1L25
advertisement