advertisement
H9229UD.qxp 02.7.31 2:24 PM Page 28
PROGRAM (Audio CD)
ZOOM PLAYBACK
(enlargement on-screen)
CD
DVD
1
Press the MODE button in stop mode.
¡ The program screen will appear.
PROGRAM TIME 0:00:00 1/1
--
START: PLAY
RANDOM: MODE
DELETE: CLEAR
EXIT: RETURN
Images can be enlarged on the screen to your taste.
1
Press the ZOOM button during playback.
¡ The image will be enlarged at the center of the screen.
¡ Pressing the ZOOM button cycles the zooming images in two steps.
2
Press the Number buttons to enter the desired track numbers.
PROGRAM TIME 2:07:43 1/1
¡
50 programs can be displayed at once on the screen. Press
“ L ” to go to the next page.
02 05 07 04 10 14 06 15 21 08
20 28 10 25 35 12 30 42 11 34
49 16 40 58 18 45 63 01 03 _
START: PLAY
RANDOM: MODE
DELETE: CLEAR
EXIT: RETURN
ZOOM [x2] ZOOM [x4] ZOOM [OFF]
3
Press the PLAY button.
¡ Playback will start in the programmed order.
¡ While the program is being played back, the STOP button works as follows.
¡
Press the STOP button once and then press the
PLAY button again. Playback will restart from the point where the STOP button was pressed. (Program continued)
2
When the Arrow button (
K
/
L
/ s / B
) is pressed during zoom play, the part to be zoomed moves.
¡
The zooming frame can be moved from the center 4 steps to the right, 4 steps to the left, 4 steps to the top, and 4 steps to the bottom when times 2 zooming. The frames will move 6 steps when times 4 zooming.
¡
The current position will be displayed on the rightbottom of the screen. Press the ENTER button, and the display will disappear.
TO CLEAR THE PROGRAM
1
Press the STOP button twice, and the program will be cleared.
Notes
¡ Adding programs is not possible during program playback. You must stop the current playback before such operations can be carried out.
¡ Press the CLEAR/C.RESET button to cancel a program. The most recently entered program will then be deleted.
¡ Up to 99 programs can be entered.
¡ Playback from a desired track and random playback are not available during program playback.
¡ Program settings will be cleared when the power is turned off or the disc loading tray is opened.
¡
Press the MODE button to check the programmed setting.
¡ The programs will be cleared when you turn the power off.
Note
¡
Zooming function does not work while the disc menu is being shown.
– 28 –
EN
1L25
advertisement