advertisement
▼
Scroll to page 2
of
44
![Handle and Power Cord Installation. ProTeam 107251, 107252 | Manualzz Handle and Power Cord Installation. ProTeam 107251, 107252 | Manualzz](http://s1.manualzz.com/store/data/006276666_1-c764b108adce7026fcadbd709da21ee7-360x466.png)
HANDLE INSTALLATION
Handle and Power Cord
1.
Insert the handle tube into the channel on the bag housing and press downward until it is 2-3 inches inside the channel. It will be correctly inserted when the handle bushing hole in the handle tube aligns with the nut plate hole in the bag housing.
2.
Insert ratchet fastener into cord clasp opening by pushing with thumb to connect cord to handle.
3.
www.pro-team.com 866.888.2168 38
advertisement
Related manuals
advertisement
Table of contents
- 3 Index
- 4 Disassembly
- 5 Index
- 6 Disassembly
- 7 Bag Lockout Switch Replacement
- 8 Hose Cap Collar Repair
- 9 Quick Release Clip Replacement
- 10 Bag Housing to Motor Housing Assembly
- 11 Index
- 12 Disassembly
- 16 Wand Guide
- 17 Wire Harness Replacement
- 25 Carbon Brushes
- 26 Index
- 27 Assembly
- 28 Power Nozzle to Body Assembly
- 29 Hose Sleeve Replacement
- 30 Pivot Bearing Replacement/Wheel Replacement
- 31 Detent Spring Replacement
- 32 Index
- 34 Assembly
- 37 Handle/New Power Cord & Strain Relief Replacement
- 39 Handle and Power Cord Installation
- 40 Impact Bumper Installation
- 41 Assembly
- 42 Clearing Hose and Wand Obstructions
- 40 www.pro-team.com