advertisement
MPC-6000 / MPC-7000 / RND-2 INSTALLATION, OPERATION AND MAINTENANCE MANUAL
EVENT HISTORY
The control unit includes a non-volatile memory recording up to 2000 system events. Identified alarm, trouble, supervisory trouble and other significant events will be recorded along with the date and time of occurrence and can be inspected by operating front panel push buttons.
Events recorded in the history are:
• Alarm, Trouble or Supervisory conditions.
• Drill, Recall and General Evacuation.
• Activation of NACs or modules used for sounders or strobes.
• Unit used for command functions. (Silence, acknowledge, reset, etc.)
• PAS_INHIBIT switch activation.
• Alarm silence (manual and automatic).
• Entry to Programmer Mode.
• Validity check on backup configuration. (Errors detected or no errors detected)
• Running of comparison function. (Same or different)
• Replacement of primary configuration.
• Exit from Programmer Mode.
• System time or date change.
• Input point disable/enable.
• Start and stop of walk test.
• Expiration of Walk Test Timer.
• Expiration of re-ring timer.
• Alarm verification counter rollover.
• Alarm of zone with no outputs.
• Activation of points defined for logging.
• Detector maintenance alerts.
13
advertisement