Loop Driver Board(s) Mounting – P/N FDLC. Faraday MPC-7000, MPC-6000, RND-2

MPC-6000 / MPC-7000 / RND-2 INSTALLATION, OPERATION AND MAINTENANCE MANUAL

Loop Driver Board(s) Mounting – P/N FDLC

• Place the provided standoffs (P/N 375-F943165) in locations shown on the Main Board

(four for the MPC-6000 and eight for the MPC-7000).

• Carefully align connector J1 on the Loop Driver Board with connector J9 on the MPC-6000

Main Board (P/N MPC6-MB) or with connectors J9 and J14 on the MPC-7000 Main Board

(P/N MPC7-MB).

375-F943165