Rear Panel. Planet WDRT-1200AC

WPS

USB

Flash

Off

On

Flash

Off

On

Flash

Off

Packets are transmitting or receiving.

WAN port is not connected.

WPS is under progress.

Data is being transmitted.

WPS is disabled.

USB connection is established.

Data is being transmitted.

USB connection is not established.

User Manual of WDRT-1200AC

Table 2-1 LED Indications

2.1.3 Rear Panel

The rear panel provides the physical connectors connected to the power adapter and any other network device.

Figure 2-4 shows the rear panel of the WDRT-1200AC.

Rear Panel

Figure 2-4 Rear Panel of the WDRT-1200AC

-12-

Interface

WPS

Reset

WAN

LAN1-4

Power

User Manual of WDRT-1200AC

Description

Press the Reset button gently for 1 second and then release it. The system starts the WPS connection.

Press the Reset button gently for 10 seconds and then release it. The system restores to the factory default settings

Connect to the Cable/xDSL Modem or the Ethernet

Connect to the user’s PC or network devices

Connect to the power adapter provided in the package

Table 2-2 Interface Indications

-13-